Glass as a material for use when repairing apartments has long been greatly distributed. These can be combined designs or separate interior solutions made of glass. What can be made of this seemingly fragile material? It is used in the design of interroom doors and partitions, the manufacture of lamps, shelves on the wall and for the cabinet and so on. Such designs look very exquisitely and beautiful, but another important factor is their functionality. For example, shelves made of glass are involved in the interior design and at the same time do not inferior in their functionality to other materials.
Glass shelves will give the room lightness and weightlessness in contrast to ordinary wooden.
Mostly glass can be used in the premises of any destination, which is important. Therefore, it will be discussed precisely about glass shelves. More precisely, then how to make them right, hang and highlight. LED lighting of glass shelves are available to each.
Work on glass cutting and its further processing
If you decide that the shelves made of glass will be present in your interior, then it's time to think about how to make them right. There are two solutions. This is a manufacturing to order in a special firm or independent work.
Want to save or just learn how to work with glass material? Then the subsequent information will be useful. You will need:
- glass cutting of good quality;
- Ribbon-type grinding, the graininess of the skins used should correspond to the value of 120 units.;
- Line.
LED backlight is capable of listening to 100,000 hours of continuous operation.
In order for the work to give pleasure, you will need, as already noted above, line and strong hands. It's not about strength, but about confidence. For convenience, glass cutting is best to buy oil glass cutter. And if you are going to cut the glass for the first time, it is better to practice a little. Please note that experts do not advise to make a re-incision glass, as in this way you scratch the glass. It is enough once, after which it needs to be broken down according to the planned line.
Article on the topic: how to make a polarity over the bed. Design Ideas (43 photos)
So, in addition to cutting, the exercise of the processing of glass cuts is considered an important factor. This is a prerequisite, since in the process of operation and work it is very easy to cut into its sharp edge. In addition to security, the processing will give an aesthetic appearance of a glass product. As mentioned above, for these purposes, a ribbon-type grinder is usually used. But if so is not, then you can perform this procedure and manually. Just get ready for it a sufficiently large amount of time.
When performing glass grinding, the treated surface must be made with water.
As a result of these actions, you will prevent the spread of dust from glass in the atmosphere of the room. This is necessary, since such dust is very harmful to human health. Be sure to use personal protective equipment, such as respirator. And the use of water during grinding allows you to ultimately the transparent surface of the edge. If the grinding is carried out without water, the edge will remain matte.
Fastening a glass shelf
The aluminum profile must accurately match the thickness of the shelf, then it will be almost impaired.
So that your glass shelf is located on the wall securely and beautiful, you can use one of two options. The first provides for the use of special holders, the second is based on the use of an aluminum profile. You can give preference to this or that method only on the basis of our own wishes, as the entire difference is only how glass will be installed.
The use of holders is a universal option. They are suitable for glass of any size (thickness). But the aluminum profile is the quality is not inherent, as it has a certain purpose. The advantage of using the profile is the possibility of equipment of such a shelf LED backlight, which is refilled in it and radiates light as if from the inside of the design. But about it a little later.
Article on the topic: Connecting an electromagnetic lock
Shelves holders have a fairly simple installation method. Its design has two parts: this is the basis that will be mounted on the wall, and the upper part that is decorative. In the process of work they are disconnected, and the base is fixed on the wall. To do this, you need to use the level and dowels, which usually go complete with the holder. The minimum number of one shelf holders is 2 pcs. But depending on what size is your regiment, their number may increase.
LED lighting of glass shelves: the device with your own hands
If there is a lot of shelves, then for each of them you can make a backlight of another color.
As it has already become clear from the information given above, to make a backlit shelves, the aluminum profile will be needed for attachment.
The order of work on the manufacture of LED backlighting.
First you need to go to the store and buy a profile voiced above. The main thing is that it corresponds to the thickness of the glass from which you make the shelf.
Next, its trimming is performed under the required size. Do not forget that all the burrs that appeared in the process must be carefully removed.
Now you need to perform high-quality fixation of the profile on the wall. For these purposes, the profile makes holes intended for fastening. Mounting the profile on the surface of the wall should be using screws and special plastic plugs. Important, performing markup and fastening the shelf on the wall, do not forget about the use of the construction level.
The next stage implies installation work with a diode ribbon. Almost in any profile there is an insert made of plastic. Remember that you do not need to delete it. Such an adaptation will protect the tape from possible contact with the aluminum surface. It will relieve you from possible closures. Prepare to the fact that the installation of the LED illumination of the glass shelf, performed using the LED tape, will be time consuming, since its refueling inside the profile delivers a mass of inconvenience, especially if there is no free access to its end ends. With open ends, insert the tape is not very difficult, since the existing groove is designed for these purposes. In another situation, various techniques can be used to place the ribbon inside the profile. One of the options for placing the tape inside the profile implies its bend by type "Domika". Just do not forget that then you have to use a lineup for alignment. The ruler can be made of wood or plastic.
Article on the topic: How to install rolled curtains and blinds on the window - 3 effective way
At the last stage, the glass shelf with the illumination already placed inside the profile requires the installation of glass. The process is simple, but you need the application of some kind of effort. Since for reliability the location of glass in the profile is dense. If you can not cope with your own hands, then the use of a wooden copper and rubber hammer is allowed.
Now you have verified that make glass shelves with LED backlight pretty easily and fast. But if you came to the opinion that this is a very difficult task for you, then the most correct will appeal to the workshop.