The bedside table is a multifunctional object required for any bedroom. Alarm clock, mobile phone, glasses, a mug with a drink, a lamp - all these things are conveniently placed on its surface and are always at hand. The bedside tables are delivered.
Bunk bed diagram with wardrobe.
You can, of course, order services for assembling furniture and in the store, but there are no particularly complex details in it, so you can assemble the nightstand yourself.
In addition, manufacturers usually attach instructions and assembly scheme. Before you start collecting a bedside table, read the list of parts carefully and check the completeness of the fittings. Inspect all the decorative details for the presence of chips, cracks, non-splashing parts, defective parts. If everything is in order, you can proceed to work. Required tools:
- Screwdriver.
- A hammer.
- The key is hexagon for Eurovint (usually included in the kit supplied accessories).
The principle of assembly in all models is approximately the same.
Standard accessories:
- Side walls 2 pcs.
- Bottom 1 pc.
- Rear wall 1 pc.
- Cover 1 pc.
- Legs 4 pcs.
- Retractable Boxes or Door with Loops
- Set of fittings
Build bedside cabinet with drawer
Sizes of the bedside table.
In order to avoid damage to the facade parts, it is recommended to assemble on a smooth floor covered with cloth or paper. Docking parts should be made strictly by factory markup on the product. Assembling corps
- Roller guides are attached to the side walls by self-drawers. The roller must be in the front of the sidewall bedside tables.
- Putting the cabinet cover face down, in the appropriate holes you need to install the seeds and rods of the eccentric screed. Fix the sidewalls and the cover of eccentrics.
- Do not turn over the design, install ducts for the bottom. Attach the bottom to the sidewalls by the walls with the help of ebovints (confirm). Tighten the connections with a hex key.
- To the bottom of the cabinets to attach the legs with self-drawing
- Check the rectangles of the collected design, if necessary, to align it and nail the back wall. In some models for the rear wall, a special slot-excavation is provided. In this case, the wall is simply moving into the frame before installing the bottom.
Article on the topic: How to store a bike in winter on the balcony
Build a box
- With the help of ducts and ebroys, connect the walls of the box.
- Check the geometry of the design on the subject of distortion and nails to nourish the bottom.
- To the bottom of the side panels to attach the rollers of the rails so that the roller is in the back of the sidewall of the drawer.
- Screw the knob.
Insert pull-out drawers into the case and install decorative plugs for Evrovints.