Highchair for feeding: how to assemble with your own hands

Table of contents: [Hide]

• How to assemble a chair for feeding "AGU"
• How to assemble a children's chair for feeding "Baby" with their own hands
• How to assemble a children's chair for feeding "Nanny" 4 in one
• Required materials and tools for feeding for feeding

For each parent, it is too early or late the question of increasing the functionality of children's furniture. All interior items in the nursery should become real transformers to justify the funds spent on them and do not stand without use. In addition, modern inventions are able to partially release the hands of engaged in mothers, turning into a chair, then in a swing, then in a whole set of furniture.

First of all, you need to collect a chairs, and then you can go to the assembly of the table, which will collect much easier.

Often, such devices can complicate the life of parents until they figure it out how to collect them after purchase. There will be no exception and an ordinary children's chairs for feeding. Of course, it is easily a chairs for feeding to collect, as indicated in the instructions, but it is not always attached, and if there is, it is not always clear for the user.

How to assemble a chair for feeding "AGU"

All children's stores sell children's furniture in collapsible except if the last instance remains on the showcase. To assemble a chair for feeding the AGU model at home on their own, you need to get all the components of the elements from the box, including the Eurovines with a special key for them. Small details are already collected in large parts, which facilitates the task. The easiest way to start collecting a chair, and then go to the table.

Stool diagram for feeding with dimensions.

The stool has two armrests with triple vertical wooden rods. The edge to which the rod is closer, is considered the front. Armrests are combined with a cross-wooden plank, screwing it with two bolts in front of the armrests, below. Already after this, the base for the stool will be stable. Next, you should install a soft sid of the chair for feeding to the base so that the restricter's strap turns out to be in front and below. Wooden crossbars are already screwed to the bottom of the soft seat.

Article on the topic: How to install and connect the water heater at the cottage?

Its seat is fixed by four bolts, and the back to the armrests is two. Now it remains to install a plastic countertop that is placed on top and snaps up with grooves in her day on armrests. On the left armrest there is a plastic tabletop location regulator. It's time to move to the collection of a table or stand for feeding chairs.

To do this, it is necessary to connect two identical parts that resemble the Roman number II, perpendicular to each other. On them the connection places with bolts are marked by strokes. Then put the resulting design on the legs and fasten the remaining item with a solid wall to form a steady design. Connect the legs with two jumpers, secure them with bolts. On this assembly is completed.

So that the chair for feeding was higher, you need to flip the table with a tabletop back and upstairs to install a chair and a plastic countertop. And in order to get a set, again pull the chair on the floor, remove the plastic table top, move the table with a wooden tabletop.

Back to the category

How to assemble a children's chair for feeding "Baby" with their own hands

Details for assembling chairs for feeding.

Initially, you need to remove all the details for feeding out of the box and decompose them on the table. It can be immediately noted that the individual parts are much larger than in the previous example, but each of them is numbered - parts of the table with numbers from 2 to 9, part of the chair from 11.

Evrogists with a key must also be attached complete. To start collecting a chairs for feeding, you need to decompose all the components in order of the numbering on the parts of the table and the stool separately. Then you need to combine and twist the parts with holes, numbered the same numbers, starting with 12. Then connect the parts with a mark 13. Next, cut the holes with numbering 11 and 14, respectively. After that, it should be a detail consisting of four separate items.

Similarly, collect the second part, alternately connect the same configurations of numbers, then connect these parts of the crossbar.

Now you can assemble a chair for feeding, screwing up a soft seat to the resulting wooden basis, while the crossbar will have to be under the feet of the child, and the strap limiter hang down. The seat is fixed with six bolts. The last step in the assembly of the chair for feeding will be the screwing of the wooden table with two bolts to armrests. An extra hole in the armrest will allow in the future to easily adjust the position of the countertop, pushing it or making closer to the child and twisting.

Article on the topic: How to make a reliable circular table with your own hands?

Scheme of the details of the Evrovint.

Thus, the stool for feeding is assembled, the stand remains under it or a table. Logic for collecting the same. Select four elements with cell numbers 3 and twist bolts. The detail should be in the form of the letter N. The second one to twist the same part of the four elements on the numbering cells 3. It will differ only to connect the last item of the part, to be numbered to be numbered 2 and it is not a joint into the joint, but as a result of overlaying one plank to another.

It remains to assemble a table for feeding, connecting all major details. First you need to combine the table top with a leg, twisting the cells with numbers 5. Add a third part and twist cells with numbers 6. Secure the resulting design with two wooden straps with cell numbers 4. After assembly, it is necessary to check the strength of all connections by additionally tightening them with the key. To spin the bolts too much is not recommended, as this can reduce the life of the product, increase the wear of the threaded connections.

To get a high high chair for feeding a child, a stool with a soft seat must be installed on a table, while its countertop should be under the legs in front or from behind at the request of the parents. And in order to get a set of furniture, you need to pull the chair, for convenience, twist a small worktop from it and move a large table on the floor.

Back to the category

How to assemble a children's chair for feeding "Nanny" 4 in one

Complex at first glance highchair for feeding. But at the same time such a feeding chair does not require complex assembly, it is possible to get confused only in changing the use modes. A complete set of stool for feeding make up the seat, base, frame, table, legs, footboard, suspension, ring, sleeve, cap, soft flooring, axis, and straps for insurance.

Article on the topic: Balcony Interior in Apartment

To install the chair on the base of the stool for feeding, it follows the ends of the axis inserted into the seat, install the bushings and rings applied in the kit. Loose ends of the axis skip into the holes at the base. Attach the force will have to tighten the caps on the protruding ends of the axis. To simplify the process, you can heat the pre-elastic caps in containers with hot water. When the child grows up, on the seat of the chair for feeding it is convenient to install the footboard, securing its brackets.

To get a rocking chair from a chair for feeding, you need special stops to turn into the inner position, without achieving the touch by them.

Evrolech scheme.

The degree of inclination is easily adjusted by one hand movement, changing the position of the rack in the grooves.

To get a chair for feeding with a table, a rack, located behind the back of the seat, install in the lower groove and firmly fasten it into the lock. Then you need to install on armrests for feeding the plastic countertop and firmly fix it in place, deploying to a characteristic click in the grooves. The stops where the highchair will be located smoothly deploy to the lower position so that they formed a steady design.

Get out of the chair for feeding a simple children's chair can be several simple manipulations. Enough chairs legs to install in a special frame. Fixing the legs are carried out at the expense of the buttons on the stool. Then push the frame, and pull the protective covers on the hinges. Support can now be returned to the lower position. Move the chair on the hooks, insert the support in the grooves and secure the lock and hooks. That's all you can get from the chair for feeding "nanny".

Back to the category

Required materials and tools for feeding for feeding

In order to assemble a chair for feeding a transformer type "AGU" or "Baby", you will need the following materials:

1. Wooden crossbars.
2. Soft seat.
3. Malaya and big countertops.
4. Eurovints.

Assembly tool One:

1. Key for evrohovints.

All tools and materials should be attached included in the kit for feeding. In detail how to assemble the chair, indicated in the instructions, if it is attached.