After the law entered into force on the mandatory inclusion of headlights for any weather, many car owners began to look for ways to do not include them at any cost. After all, everyone knows, in this case, any light headlights will fail. The most prompts found the exit - LED tape for headlights with their own hands, we decided to highlight special attention and tell the features of such a connection, and why such a backlight is permitted at the legislative level.
LED tape for headlights: why you can install
Many believe that such a backlight is superfluous and creates only "Pont", we are radically disagreeable with such an opinion. After all, we believe that the installation of the LED tape in the headlights is a useful factor that makes the car better and allows not to include running lights outside the city.
Modern brands establish such a default backlight, however, it is found only in expensive equipment. Each person will be able to install it on his car, there are no special difficulties in this, it is enough to comply with certain rules so that there are no problems with the GAI bodies.
The feature of any LED tape for the car is that the usual tape shines with an angle of 120 degrees - this light is unacceptable. You need to create an angle of glow of 30 degrees, then it will perform the functions of the DRL, while creating visibility in at least 300 meters. The optimal degree of glow is created by reflectors and lenses. I want to immediately calm if you can buy a LED ribbon for cars, then such lenses and reflectors are set by default.
Article on the topic: Installing a lathe on the balcony
What light is needed
Next, pay attention to the color flow of the lamp installed in the spotlight. The color temperature must coincide with the ribbon. Let us give a simple example: a halogen lamp with a color temperature is installed in 3200K (they are installed in many models), you put the LED tape into the ankle light headlights in 6000K. Can you imagine how it looks? We will answer you - terrible, such a backlight looks coryato, anyone will notice it. Learn how to choose a LED ribbon.What are the LED ribbons for cars
Of course, they can be divided into light of the luminescence: red, blue, yellow, green, etc. Our recommendations above the color you have seen. Let us dwell on how lamps and their features exist.
- Each lamp is in a separate silicone cylinder.
- Sealed LED tape SMD 5050, mounted only by the underside.
- Tape placed in PVC tube.
Remember, the tape should be moisture-proof. Choose only those that have IP 65 and IP 68 protection. If the tape is installed directly into the headlight, then you can choose a smaller defense.
How to install LED ribbon in the headlight
- First of all, you need to remove the fair from the car.
- Next, we disassemble the sealed block of the headlight, for this, the sealant must be warm up, it is necessary to do it carefully.
- We install the ribbon in the headlight, there are no difficulties here.
- Close the headlight block, it is impossible to do here. If the headlight is not hermetic - moisture will immediately fall into it and, most likely, burn the lamp.
- Insert the headlight to the place.
Set the tape in this way can be on the front and rear headlights. The result is excellent, such a backlight looks gorgeous. It will be interesting to find out: how to make lighting ice tape ceiling.
Illumination inside Vary: video
Install the LED tape on the headlight
- Take the ribbon.
- We plan a place where we are fixed.
- Tape glue.
- We are waiting for 5 minutes until it secures.
Article on the topic: Interior of the American House in Art Nouveau style in the USA
True, there are certain disadvantages:
- The tape looks ugly on the spotlight.
- In winter, it is frozen on it.
- Water is ugly flow.
Video LED Tape Headlights
How to connect a ribbon to automotive electricity
Connection using a block
LED tape for headlights in this way is pretty simple. Connecting in this case occurs directly from the battery, it allows you to remain independent of the entire car electricity. Functions with such a connection similar to daytime running lights, the principle of operation of the block is similar.
In this case, you can use the controller for the automotive LED tape, so you can independently adjust the frequency of the glow, if the tape is multicolor - choose the required color. Using the controller, you can create a modern backlight, which is unlikely to meet somewhere else. However, you must understand that the controller costs money, and more than one.
Parallel connection
To make such an installation, you need to fully disassemble the headlight, while paying attention, the tape should shine outward. If it will not shine not in the other side - there will be no sense from such a backlight.Connection without a lamp
Here we just remove our regular lamp for running lights, and instead there is a LED tape for headlights.
To connect it is worth using a connector, it will be easier to attach everything to each other. The vehicle connector is a tape socket, and a base that will be screwed instead of a running lamp.
You can also roll the wires of the ribbon to the cartridge, but in this case the cartridge itself will be visible, and this is ugly.
Article on the topic: How to connect an LED tape from a 220 volt network.