Curtains and curtains are most often hanging on the cornice. In most cases, this process is quite simple. Moreover, if we are talking about a wooden or concrete wall. However, many people prefer to separate the walls in their premises with the help of a wide variety of materials. Turning gardine with a cornice on plasterboard, for example, it is quite difficult, because this material is different from all other things that is not strong enough.
Carnis cooper circuit with niche.
Many people think about how to hang cornice on plasterboard. In fact, in recent times, special brackets are included, which allow you to hang eaves to drywall without any problems. At the same time it does not matter what exactly will be attached to the design. It can be a Gardin or Curtain. In any case, it is worth talking in more detail how to hang the eaves itself on plasterboard. This information will be useful to each person.
Required tools
To begin with, it is necessary to take care that the house has all the necessary tools and materials that will allow this procedure without any special difficulties. So, it will take for work:- screwdriver;
- roulette;
- level;
- Brackets or special corners.
Basically, these materials and tools will be enough to hang the cornice on plasterboard.
Installation instructions
Mounting scheme in niche.
After all the tools and materials are chosen, you can proceed directly to the process. To begin with, it is worth declaring the place where the eaves will be mounted. After all, it may be not only a wall, but also the ceiling, as well as it can be installed between the two walls. If we are talking about drywall, it can be everywhere.
Article on the topic: Layout small houses for giving
Next, it is worth checking whether the eaves will be bothering the opening of window frames. If it prevents, it is worth choosing another place for mounting. It is always worth sticking to the rule that states that the cornice is best hung up 15x above the window level. In this case, there should be no problems.
It is very important to measure the distance between the window and the installation site. Everything must be calculated in such a way that the curtains and curtains do not cling to the windowsill or battery.
The scheme of using anchors for hanging items on plasterboard.
So now you can move directly to the process of fastening the eaves to the walls of plasterboard. Very often it is for this material and it is necessary to mount it, because it is becoming more and more popular every day.
Mounting cornice is not so difficult.
Height is selected. Now it remains with the help of a level and some typewriting tool to determine the exact position of the design. Further, on this site there is a horizontal line. Next, on the wall it is necessary to note those points where the brackets will be installed. They should be located at the same distance on both sides of the window.
After that, they can be fixed on plasterboard. It is very important that they keep them quite firmly. They also have to be on the same level relative to the window. If these nuances do not observe, then the likelihood is that the eaves will not serve the deadline for him, and the curtains will hang crookedly, which, of course, will affect the overall perception of the room.
Some features
The ceiling is also quite often trimmed with plasterboard. Here, too, the cornice can be fixed without any problems. This uses the same brackets and fastening tools.For mounting on the ceiling, it is also necessary to first decide on the mounting places of the brackets. For this, measuring instruments are used. You can use the level and tape measure.
Article on the topic: Wallpapers with inscriptions and letters in the interior
Fastening locations should be located at an equal distance relative to the window. They are mounted approximately 15 cm from it. Sometimes the mounting option on the ceiling is preferable than mounting on the wall. This is characteristic of those houses that have low ceilings, where the distance from the ceiling to the window is minimal.
Brackets are attached at an equal distance relative to the window. It should be monitored that they are from it at an equal distance.
Placement scheme elements.
Sometimes you have to install the eaves between the two walls. This option is also quite often used. This is especially characteristic of the premises where the distance between the walls is minimal. Here, a different attachment simply can not be. In this case, the installation method is worth measuring the distance first from the angle of the wall, and then from the ceiling to the window.
After all the measurements are manufactured, you can mount brackets to plasterboard. It is done quite easily. It all depends on the fastener, which is used for these purposes.
After the brackets are installed, you can start the installation of the cornice along with the curtains. Now you can admire the beauty that turned out in the end.
Sometimes the eaves to the plasterboard are attached not using brackets, but by means of special corners.
These corners do not always come in the kit, so they are better to order in specialized organizations in advance. Such a fastening method is used only in extreme cases.
Most often, mounting with the help of the corners is used when a heavy element is installed. In this case, ordinary brackets may not withstand the load, because we are talking about drywall. In addition, when attached to the corners, the load is distributed on the surface of the drywall uniformly. In this case, the likelihood is reduced that the corner is simply falling off.
Practical recommendations
Corresponding scheme for tension ceiling.
Article on the topic: Flexible laminate: rubber and soft, glue vinyl, what is the floor, warm rubberized floor covering
Fasten the cornice with the help of the corners is simple enough. First you should decide on the place of installation. Here you can consider the two main mounting options - installation on the wall where the window has, and the installation between the two walls. Both variants are sufficiently common.
After the place is defined, you can proceed to measurements. After that, it is worth fastening the corners. They are installed at an equal distance from the window. It is very important that they are exhibited by level. After that, they can be fixed and installed the necessary accessory directly to them.
After the question with the installation of the eaves on the plasterboard is resolved, you can begin the fixing of the curtains.
If a round element was installed, then you can leave one free ring between the edge of the rod and the bracket. In this case, it will be much easier to evenly distribute the chart on it.
So, now it is quite possible to state the fact that the installation of the design on plasterboard is fully completed. In this process there is nothing supernatural. It is simply necessary to follow the instructions that were presented above.
There are several basic methods of how to fix the cornice to plasterboard. All of them are actively used. Which specifically choose, everyone decides for himself.
It is worth remembering that if light curtains have to hang, it is best to prefer the mount with the help of brackets, and in the event that heavy curtains need to hang, it is better to choose angle as an attachment. It all depends on each specific life situation and your preferences.