As a rule, linoleum is assessed in the kitchen and in the corridor. This floor covering is durable, has resistant to abrasion and is produced in different colors. It is enough to simply lay it. But, at the same time, over time, he loses its initial shine. Can this be fixed?
Modern household chemicals allows you to solve many problems, including this. There are also "grandmothers" recipes that will help to return the gloss with linoleum. But before talking about how to wash the linoleum to glitter, consider the general rules of cleaning, allowing to extend the operating period of the floor covering.
Proper cleaning
First of all, it should be noted that the first wet cleaning of the linoleum should be done no earlier than a month after laying. During this time, dirt should be eliminated using a vacuum cleaner or a conventional broom. Alternatively, you can use special wet wipes that have an antibacterial effect. Linoleum must adapt to the conditions of the external environment.
During this period, he gains moisture from the air. If the moisture will additionally fall on it, and this can not be avoided during a wet cleaning, then the flooring can be deformed. It is not possible to correct the situation. Therefore, almost new flooring will have to be replaced.
It is necessary to remove any room as it is contaminated. Because in the kitchen prepare food, it is desirable to clean this room daily. You should start cleaning with dry cleaning. The broom, brush or vacuum cleaner is collected entire garbage. You can skip this stage. However, it will significantly simplify the further cleaning process. Then, you need to wash the floor. This cleaning does not end. The last stage is polishing the floor covering. Only polished surface will glisten.
When cleaning the linoleum cannot be used abrasive agents. High temperatures should be avoided, which adversely affect the floor covering. Wet cleaning should be carried out well pressed with a cloth. It is desirable after a wet cleaning to wipe the linoleum in advance prepared piece of flannel.
Article: Benefits of playgrounds for cottages
If cleaning is performed daily, then by and large, the actions described above should be enough to ensure that the finish coating is not only clean, but also has shine.
Separately, I want to say about stains, which eventually appear on linoleum. To get rid of them you need to use special means. From fat spots, the linoleum is cleaned with the help of a conventional detergent intended for washing dishes. Using gasoline can withdraw a number of spots. Namely:
- stains from food dyes or coffee;
- shoe cream;
- Zelenki;
- marker;
- iodine.
This tool will help get rid of traces left after moving furniture. Kerosene has a similar effect. If you need to get rid of a small spot, you can use the ammonia solution. You can also try to apply a varnish remover.
From limestone spots will help to get rid of means for washing the tile. It is advisable to remove the stain while it is fresh. From outdated spots to get rid of much more difficult. If the dirt particles penetrated the linoleum deep into, then this spot cannot be outlined. After removal of the stain, it is necessary to wash the entire floor.
Apply the shine coating
If, after polishing the floor, the linoleum did not acquire the desired brilliance, but I don't want to use special means because of their chemical composition, you can use grandmother's councils that are tested by many years of experience.
In each house there are several potatoes. The water that remains after the cooking of this vegetable is capable of returning the gloss with an outdoor coating. Therefore, you need to make potato decoction. Then, add it to the water and mix everything well.
Made at home means for giving gloss linoleum ready. Replace the decoction can be potato starch. At the same time, it will be needed literally a couple of spoons.
Cow's milk mixed with water is another recipe that does not use one generation. Milk and water should be taken in equal proportions. Linoleum after washing this composition must be wiped dry. The result may not appear immediately. Therefore, you will have to do several times this procedure.
Article on the topic: Volumetric decorative letters and inscriptions in the interior (35 photos)
You can also use linseed oil or olifer to polish linoleum. To apply the means to the coating with the help of a sponge or wool fabric. At the same time, it is not necessary to heat the sponge with oil or olifa. The surface of the linoleum is polished by a piece of flannel. This method gives the desired result from the first time.
It can be used during polishing polymeric mastic or polyroli intended for this flooring. They return glitter with linoleum, and create a thin film on its surface, which is imperceptible to the naked eye. This film protects outdoor coating from moisture.
Conclusion
So that the floor covering looks like a new one, even after a few months or years after laying, you need to properly care for it. Care implies not only wet cleaning, but also polishing the surface of the linoleum. You can use both special means and tested by the years "Babushkina" recipes.
In order for the coating to be resistant to dirt, it is possible to process it with a olphic film on the surface of the linoleum film. The same effect has a mastic. You need to handle these tools with a linoleum coating at least 2 times a month. It is undesirable to walk according to just rubbed linoleum. It is necessary to minimize all loads on the floor covering over the next 10 hours.