Usually the end of the repair is marked by the replacement of all decorative elements: suspension of new curtains, lamps, decorating walls. Typically, such work does not cause difficulties, but nevertheless, instructions on how to hang a luminaire on the ceiling will be useful for amateurs. She will talk in detail about frequently performed errors.
The lamp must be hidden, as it can fall and harm someone from family members.
Option of the classic lamp on the ceiling
Industry on lighting devices is now rich. These are all sorts of wall and outdoor options. Of course, ceiling lamps and chandeliers are more popular, as well as small bedspreads, fixed on the walls, making a room cozy and suitable for a relaxing holiday. For the correct light distribution, whole formulas and theories are invented, in more detail the designer can tell.
Installation scheme of classical chandelier.
So, as it is clear from the chandelier design, it contains 3 years: two phase and one zero. The electrical part is the most important in this matter, and it is impossible to treat it with disregard. First of all, you need to pay attention to the ceiling: from there you should also see the wires. If they are not observed there, you should mount the wiring with your own hands, otherwise the chandelier installation will become impossible. When there is only a scab or lamp available, the place for them can be determined on the walls, leaving the ceiling at the same time clean. The following tools will be needed for work:
- pliers;
- screwdriver or screwdriver;
- insulating tape;
- knife;
- ladder.
Installation Recommendations Lamp
First, it is required to determine the purpose of each wire on the ceiling, so as not to arrange a short circuit in case of incorrect actions. To do this, use the indicator and, touching the bare part of the wire, see whether it is lit. If there are no bare parts, they need to be cleaned, pre-de-energized the wiring by means of a switch or an incinerator. Focusing on the wires, you can start the installation of the lamp.
Article on the topic: Parquet boards update: Vacuum cleaner and care, how to care for parquet, wash and update at home
Types of anchors used for montage chandeliers.
There are two ways to suspend the chandelier on the ceiling: with the help of a hook and decorative plank. Both methods are easy, but require the presence of a partner to act in a timely manner in all directions.
In this case, the design of the lamp should not be too weighty for the ceiling, if it is made of any materials except concrete. Unlike the walls, the support will not be there.
Installation is worth producing with electricity off, in a well-lit daylight space.
Mounting with hook
Field mounting methods.
Usually this element is in the set of chandeliers with bend. Otherwise, it will have to buy. If a hole is already present in the ceiling, then you can not worry much, but simply screw it up to the stop, connect the wires. Then the question of how to hang the luminaire on the ceiling will be resolved within an hour. The difficulty is that the hole must be exactly adjacent to the size of the hook, and the old, as a rule, is loosened.
Therefore, a wooden chop is clogged there for a steady position, and only then the hook for the lamp can be screwed. It will take a certain force so that the thread tightly went into it. The chandelier is then hanging, the wires are connected, the decorative cup is twisted. Now the device can be operated.
Installation chandeliers on the ceiling with a decorative plank
Installation scheme embedded in the stretch ceiling of the lamp.What it is? This is a metal plate, suitable by contour to a specific type of lamp and holding the design on the ceiling. Contains the finished holes for fasteners, so before starting the installation it is worth attaching it to the surface of the ceiling, indicate a point marker for drilling. Thus, their places will be determined. If the design of the ceiling is monolithic, you will have to work perforator. Drilling the desired number of holes, the bar must be attached, while setting the chandelier bolts into it. It is necessary to delay firmly, based on the weight of the chandelier itself. Unlike the walls, the ceiling will hold only a hook or bar with the whole structure, therefore, the support will not be.
Article on the topic: Pallet for the shower cabin - Tips for choosing
Now you need to manipulate and the chandelier, and the bar at the same time, so that the lamp accurately accepted the bolts in their holes, which are also tightened with nuts. Needless to say, the design should be disassembled into parts for the convenience of mounting. Then the wires are connected, the performance is checked, and the lamp can be collected.
Errors committed when fixing the lamp on the ceiling
First, it is the structure of the coating. People make beautiful stretch tension, and then puzzled by the problem, how to hang the lamp. Indeed, special execution requires the same fastening. Under the canvas, the ceiling originally attached wooden bars, in the fabrics - blocks, so that the hole does not go styling with the weight of the device. Only then can be attached to the lamp.
Secondly, this is the installation of chandeliers with its "full parade", that is, with all components and decorative details. It is necessary to delete everything too much, leave one core and only then start working. This also applies to lighting devices that are hanging on the walls. To then collect everything as it should, you need to take a picture of the finished product. In this case, there will be no problems with the assembly.
Improper wire connection at least may threaten short circuit. If the hosts are poorly understood in electricity, it is necessary to invite the electrician, otherwise the case will end in deplorable. At the same time, the master will check the entire wiring that the wall hides.
Neglecting assistance tools (stepladers, dielectric gloves) and negligently affect their own injuries. In addition, the installation from the stool is not too convenient, you can not reach the ceiling.
Buying too cheap instances is another error. There is no dispute, some of them look quite presentable, but here the content leaves much to be desired. This refers to the quality of wires. If still buying is done, it is worth thinking, maybe the wall is the best playground for it.
Article on the topic: Design of one-room apartment Khrushchevki
Collect and hang the lamp on the ceiling is not as difficult as it seems. Observing all the above rules, after a few hours you can get the desired.