One of the most popular flooring today is laminate. This material has gained good position in the finishing materials market due to the relatively low cost, ease of laying and positive performance.
From the point of view of care - this product is unpretentious. An ordinary polyrolol for laminate after a wet cleaning will lead the flooring to excellent appearance. Features of polishing compositions allow not only to make the surface of the floor shiny, but also to protect it for a long time.
Choosing a polishing agent
Use the formulations without wax to not damage the laminating film
At home, the laminate polishing is required no more than three or four times a year. Therefore, the choice of polishing compositions should be made on the basis of cost, quality, flow rate per 1 m2 and storage period.
It is precisely a polyrolol for laminate, and not for parquet. In the care facilities may contain wax. Parquet is made of natural wood, so it can absorb the compositions deposited on it.
Wax, partially absorbed into the parquet board, performs a protective function. Laminate has an upper film layer, which protects it from moisture. Accordingly, the funds in which there are waxes can damage the protective film. Wax formulations form stains on the laminate.
Qualitative polishing agents for laminate are based on silicone. Also in the color of the floor covering, it is possible to choose a polyrolol with additives of the corresponding pigment.
This composition forms additional film protection for laminate from moisture and mechanical impacts. In addition to this, he attaches a shiny look and smoothes the fading areas, making them less noticeable on a general background.
The recommended laminate polishing frequency is once every six months. A qualitatively polished surface must maintain its appearance during this time.
With intensive loads on the floor, the period between the use of special means can be reduced.
Article on the topic: how to paint tulle with your own hands at home
Polyrol oil
Polyrol for laminate is produced in different versions. These are mainly soluble funds, sprays and mastic.
Soluble tools are used when cleaning outdoor coating. They are bred with water in a proportion installed manufacturer. The process of applying them is no different from the floor washing. After drying on the surface of the laminate, a protective layer will be formed. It serves not very long time, and therefore soluble means are used more often than their analogues.
Rubbing the floors, watch not unprocessed places
Sprays and masts allow laminate much longer to preserve an attractive appearance. They are applied after normal cleaning. A spray is sprayed onto a clean surface or a mastic is applied, after which the surface is rubbed.
When using similar means, it is important not to leave skips and rub the entire surface of the coating. Mastics and sprays create a relatively thick protective layer, which will be able to hold out the maximum term.
Regardless of the selected means, the polished surface will look much better than the usual one.
The advantages of polished floors
Polished floors in homes and apartments produce a truly pleasant impression of both the owners and guests.
Such covers look expensive, cozy and beautiful.
The main advantages of polyterols include the following:
- The coating appears characteristic shine. Special specialized floors very beautifully reflect the light.
- Over time, the colors again acquire the original appearance. Pigment additives in the composition of polyrolles allow you to restore faded tones by making them brighter.
- Eliminated crayons scratches and hurry. Sand and similar solid small particles destroy the protective film of laminate as an abrasive material. Polyrol fills all micro-tests, allowing the coating to save its original appearance. For details on the cheapest laminate polishing method, see this useful video:
The use of special tools for laminate care allows you to significantly extend its service life and maintain an attractive appearance for many years.
You can polish the floors from the laminate with various compositions. The main thing is that they are chosen in color and are manufactured specifically for this type of coatings.
Article on the topic: Competent choice of cloth for the floor