How to make a threshold for a balcony: Method of manufacture (photo, video)

Anonim

Photo

Many believe that the threshold on the balcony is a conventional thing, most people simply do not think about what can be done independently, and he will have very good qualities.

How to make a threshold for a balcony: Method of manufacture (photo, video)

The qualitatively made threshold on the balcony will be not only convenient, but also create the integrity of the connection of the room and the balcony door.

The threshold to the balcony can be made in different ways, you can use a wide variety of materials, but the balcony of tiles can be most popular. It should be noted that the qualitatively made threshold between the balcony and the kitchen is not only beautiful, but also convenient. The threshold from the tile is made in a short time, but you can use other ways.

How to make a threshold on the balcony - the first way

How to make a threshold for a balcony: Method of manufacture (photo, video)

When creating a threshold, a formwork is installed on the balcony, which is then filled with cement mortar.

  1. First of all, the formwork is prepared.
  2. The tile from the tile should be laid from the central part, while the necessary pieces must be prepared initially. In this regard, it is very convenient to use a special machine for cutting tile, you can avoid marriage.
  3. Then the corner of the balcony should be issued.
  4. The space between the formworks should be neatly filled with a solution, which is made from sand and cement (the ratio should be 1 to 3), the solution beyond the design of the construction in no case should.
  5. If there is a "breakthrough" of the solution, then they must be fixed with formwork.
  6. After the solution is flooded, you need to remove the formwork and remove the cross.
  7. Special grout is used to close the gaps.
  8. Those remnants that remain from grouting and excess cement mortar should be removed with a damp cloth. After that, we can assume that the great threshold on the balcony is ready. But first time to step on the fresh threshold is not recommended, it is necessary for reliability.

Article on the topic: Summer heating system

The second way to make the threshold to the balcony

It is possible to make a threshold in a different way, this method is advisable to use if the threshold on the balcony has a significant height.

A special problem is such a situation delivers households in old age. In order to make a threshold on a balcony in this way, materials and tools will need:

  1. Silicate brick (it is best suited for such work).
  2. Dry plaster mix.
  3. Glue, which can be glued to the tile.
  4. Water.
  5. Primer.
  6. Perforated corner.
  7. Putty knife.
  8. Scissors that can be cut metal.
  9. Tile.
  10. Master OK.
  11. A hammer.

How to make a threshold for a balcony: Method of manufacture (photo, video)

For facing the threshold, you can use tile tiles.

The first thing the doorway on the side of the balcony should be cleaned of dirt and dust. Then the primer is neatly applied to the purified floor, thus, a rough surface is created, on which brick with a solution is excellent. The dry mixture is divorced with water and stacked on the floor of the balcony with a layer of 1 cm thick. The brick is wetted with water, placed on the solution, it is necessary to slightly knock the hammer.

After that, the base should be dry, a perforated metal corner is stacked along the edge of the brick masonry, while it is necessary to cut it up. The beacon must be fixed from the balcony, the height of which is 0.5 mm. After that, you can start laying the screed.

Now it is necessary to divide the dry mixture and apply it to silicate bricks. The spatula must be carried out along the line of the threshold, the mixture is distributed evenly. At the same time, it should not rub the solution, the tile is laid exactly by the screed, all this should be performed with maximum accuracy, this is a prerequisite for successful work.

After the base is drying, everything should be most thoroughly projected, and the primer must be deep penetration. Then you need to wait about 90 minutes, after which it is necessary to put the tile on the tile glue, it is impossible to do this before, otherwise the result will be negative.

Article on the topic: One-room apartment design for a family with a child

Everyone wants to make the design looks aesthetically and beautiful, for this you need to do everything without hurrying and observing all the instructions. As in the previous method, the threshold is not worth exploiting the threshold, it gains strength.

As it becomes visible, nothing particularly difficult to make such a threshold, no, you only need to make certain efforts and work carefully. And you can soon begin to exploit such a balcony, which will be the most real object of envy and admire all acquaintances. And the means is used minor, and the time is somewhat somewhat. So every man can make such work with your own hands, even if there are no necessary skills.

How to make a threshold for a balcony: Method of manufacture (photo, video)
How to make a threshold for a balcony: Method of manufacture (photo, video)
How to make a threshold for a balcony: Method of manufacture (photo, video)

Read more