Creation Hand-Made is not only a fashion trend, but also designed to add a special peculiarity in the design, and in the dwelling - a warm and cozy atmosphere. To make a lamp with your own hands, it is possible to pick up the materials and items unnecessary in everyday life, which already experienced their shelf life, giving them the second life. Consider how from such things to make an outdoor lamp.
The floor lamp can be made with their own hands from any materials and unnecessary things.
Production features
Compared to the rest of the decor decor, the lamps, with their own hands, performed, first of all should be functional. Their appointment is to provide illumination, which for its part will create a certain mood and comfort for the situation. The light effect emanating from such a lighting device may be: a light spot, mysterious twilight, bright glow. What exactly should not happen, so this is a cluster of light due to the use of opaque and dense materials.Please note: the safety of the use of ready-made sticks needs to be paid to high attention. LED and energy-saving lamps will exclude a fire-hazardous situation established by electrician rules - short circuit.
Application of electrical appliances
Stages of latch manufacturing (1 part).
Make an outdoor lamp independently will not work without the use of electricians.
Lamp cartridge. Recommend to choose E27 cartridges that are suitable for standard bases.
Lamps. Not the best choice for a self-made product - conventional incandescent lamps. During operation, such lamps are heated and can cause a fire. It is more expedient in this situation to prefer the lamp with the energy savings function.
LEDs - excellent alternative to lamps. At the expense of easy-to-use and not represent the danger of LED lamps in the dwelling create unsurpassed lighting.
Electric cable. Luminaires, with their own hands, and having one lamp are connected with the participation of PVS cable 2x1.5. If there is a 3-wire wiring in the design of metal parts.
Article on the topic: Pictures from putty do it yourself - create your own interior
Features of project development and execution
Stages of label manufacturing (2 part)
Wanting to make a lamp with your own hands, it is important to consider the place to install and subtle the connection to the wiring of the house, the conditions for operation. The main requirement for the lamp is its safety in the work. To exclude a short circuit, it is securely isolate all the locations of the connections and hide behind the items of the product.
The sequence of manufacturing the lamp:
- Connect the electrocabyle with the cartridge and fork. Connections are isolated everywhere, the cable is masked behind the design items or the vescers design.
- Mastery of the frame under the lampshade or the BROWS (in accordance with the project).
- Create and decorated lampshade.
- Collect design.
Original designer development
Stages of the manufacture of an outdoor lamp.
The most fantasy part when assembling lamps is considered to be the execution of the lamp. It is at the expense of it it turns out to achieve the exclusivity that distinguishes Hand-Maid. The use of various materials is possible as a lamp. Any thing can form the basis of a man-made design. Woven and paper products are the most common ways, but not the only ones.
Of the rather unexpected solutions, it turns out to create original products. It is appropriate to use plastic or tin bottles, branches, building mixes or old vases. The choice is limited exclusively by hand of craftsmen and his own fantasy.
Floor lamp. Polymer clay (plastic) is a kind of raw material for execution. It dries quickly, easy to process and decorate. It is possible to create a beautiful and unique device from it. For the manufacture I need a base for applying. Such a base can perform a cardboard box (from under juice, for example) or a roll of paper. The basic form will have an impact on the lamp configuration.
Factory drawing.
The polymer clay is slowly extruded to the cardboard blank and give a completely dry. After removal of the basic material, the lamp is already ready for commissioning. But it will be much more interesting to look at the lampshade, decorated with one of the famous techniques, for example, decoupage. If there is no polymer clay, then it may well be replaced with decorative putty, smelting, construction sealants, liquid nails and other means.
Article on the topic: How to hang curtains for curtains on the wall and on the ceiling
Big vase as a lamp. A little harder to make an outdoor lamp from a large vase, since it will be necessary to drill holes in a rather breaking material. The metal cover is attached to the neck, where the pin is mounted, which will replace the tripod. In order to endow the stability of the product, the cover is secured by the dimensions of which corresponds to the widest place in the vase.
Abazhur can be original with paper flowers from napkins.
Through the hollow pin and the hole on the lid passes the cord and release outward through another hole drilled at the bottom of the vase. Cartridge and plug are attached to the wire. To provide greater stability design, the sand is poured inside the vase. The lamp shade is made on the basis of a wire frame, covered with an openwork or simple cloth.
Tree lamp for minimalist style. For style in the spirit of minimalism, undermining material and wooden rails are suitable for the creation of the lamp. From the rivers create the necessary segments that are covered with a veneer and fasten through a furniture stapler.
From the observer material sew lampshade in length slightly more frame and guard. The canvas is fixed using a stapleron from below and above the frame edge. On the ribs of the lamp, the fabric closes wide corners of the tree, the brackets are masked with thin rails.
A lamp lamp for an outdoor lamp can be decorated with fabric decor.
Energy saving chandelier. To make a similar lamp, you should contact the metal reinforcement, from which the chandelier was once made. Perform the lamp in several ways:
- Take a thin wire and a plurality of glass beads. Wired with pre-strung beads wind fittings. In this case, the order of the winding is chosen arbitrary.
- Take a thin PVC (transparent or milk-matte) and cut out butterflies from it with matchboxes. Thin PVC are cut by scissors. On each butterfly, the hole is done, for which they tie the fishing line. The second end of the fishing line is tied to the upper circle on the valve.
- It is possible to use fate. For example, lilac color with sparkles. Tissue cut sizes: 2 m in width and 4 with a small meter in length. Fatin can be chosen any, but it should feature stiffness and be colored. Next prepare cardboard circles templates, which should be seven. The diameter of the circles - starting from 40 cm and ending 160 cm. In the central part on each element, the hole is done (with a diameter of 20 cm). After that, they are stacking. The laying starts to be conducted from the largest, and the imposition of lumens in the center are achieved. Circles are connected by leisure. The edges of the fate can be left untreated. The center is tightened by thread. After the neck of the cord and tightening the thread is fixed. Then we spread all the folds like a big bow.
- From the climbing live plants (for example, ivy) perform live brains. The plant should grow in a light plastic pot. For registration, pots are used sisal. The valves are fixed on the valve and durable wire frame. The pot is inserted in advance, because there will be no places. After the construction of the frame we are sprigs. Ivy unpretentious to watering.
Article on the topic: Mold on the ceiling of plasterboard
Homemade point lamps. To perform such a lamp, it will require garland, organza and beads, and a CD and a well-bent wire. The length of the organza is selected depending on the length of the future product. Beads find glass in the maximum possible amount.
If opaque beads are used, then this model will look less beautiful and only when it turns off.
In the included state of the product, such beads will take a form of multiple dark spots.
The performance of lighting devices from infringement materials is an unlimited field for creativity of this Wizard. Using the proposed descriptions, you can not think about the idea of the product. In the presence of fantasy and creative thinking, you can make individual features of the decor in each type of construction, leaving how the technical part is.