Quite often arises disputes about the order of procedures - what's first doors or laminate? For beginners in building business, this issue is especially important, especially if they plan to carry out work with their own hands.
There are many opinions on this matter, but there is no unambiguous answer to this question, you can get a great result with any priority procedures, it all depends on the nuances.
Some option can be easier, and the other is more complicated, so you need to study the characteristics of each of them in detail.
FEATURES OF LAMINATE MANDATE AND DOWN BOX
If the installation of the floor will change the floor height, then it is better to put the floor covering
Consider that quite often when the coating is installed, the floor height changes. Sometimes changes can be large and reached about 2 cm. When installing laminate, the height of the floor increases on the thickness of the substrate and the coating itself.
Although the laminate flooring procedure is simple, it may be difficult to fit the dimensions of the door frame.
Between the laminate and the door there should be a clearance for free opening of doors
For the door box, you will need to first determine possible difficulties during installation. The first problem can be the size of the gaps. It is necessary to take into account that there should be a gap between the laminate and the door, which will ensure its free opening.
Some forget about it and because of this, problems arise when opening the door, which can lead to a damage of the floor covering. In addition, you need to take into account the height of the box and platbands. They will need to fit into advance under the height of the floor, since after installation, cutting will be extremely difficult and inconvenient.
Thus, by defining the nuances that can affect the complexity of the installation of the coating or door, you can choose a more convenient option for yourself.
First doors then gender
Door box need to be installed on a draft base
Article on the topic: Old door from the massif: Restoration do it yourself
If the doors are installed first, you will need to take into account certain nuances. These include:
- First, it will be necessary to complete all draft processes, these include surface alignment, selection of coating, work with slopes and so on.
- Then buy doors, and it will be necessary to take into account that the floor level will be raised, measurements are performed for this. The main thing is to leave a place for flooring flooring. It is recommended to leave an additional clearance of 2 mm so that the door can freely open and close.
- It must be borne in mind that the installation of the laminate is made without fastening to the base. This means that the box is installed on a draft coating. The laminate laminated with the division between the rooms to the threshold and from it.
Mount the platbands after laying outdoor coating
Installation of valves is made after flooring flooring. Sometimes there are situations when laying the laminated floor you need already with fully installed doors.
Here the procedure depends on whether the old coating or the laminate will be changed directly to it. Manufacturers assure that the laminate can be installed almost on any coating, the main thing is to be perfectly even.
To prevent the appearance of creaks in the future when walking, you must install the substrate. However, this will lead to an increase in the height of the floor for another 1 cm.
It will take to calculate in advance whether the door will cover the floor. If the hook does not avoid, there are two exits from this situation - to shorten the canvas or dismantle the old coating.
It is extremely important to make the door can freely open or close. If you are preferred, you can cut them a bit.
The diagram of the door frame device is as follows.
Consider that the laminate should go under the box, but should not tightly lay down to the walls of the doorway. For this you need to make space on both sides of about 0.5 cm.
The advantage of choosing such a session of work is the impossibility of damaging the coating during the installation of the door box. In addition, if the doors are not planned to change or they were installed before the acquisition of laminate, this procedure is the only one. The disadvantage can be considered a rather complicated process of fitting the door to floor covering. All the details of the installation of the doors, see this video:
Article on the topic: What amount of boiler to choose?
First laminate, then doors
Many believe that it is better to lay a laminate first. To avoid damage to the coating during the installation of the box, you can pre-lay it with cardboard or other material. You will also need to handle the door slips in advance with plaster.
Installation of the box is not so complicated and pollution will not be much, so it's hard to worry about it. But the laminate is much easier to put when the work does not interfere.
Installation of doors is recommended to produce in advance only if there is a threshold in the pickling. For other cases, you can determine the location of the threshold and simply cut the laminate in the desired place.
The main advantage of preliminary laminate installation is that the box will not put pressure on the coating and this will prevent its damage possible.
Correctly measure the opening for the box
After completing work with the floor, you can accurately measure the opening for the box and determine the required size.
The finished products will be extremely difficult to shorten if the dimensions were incorrect.
In addition, the cost of installing the door after laminate flooring will be much smaller. Also consider that to reduce the size of the box, a special tool will be required.
When docking in the doorway of two different coatings or varieties of laminate, it is necessary to take into account the gaps between the coating and the wall that can be issued using a special profile.
Door opening device
The advantages of such a procedure procedures are:
- Availability of the opportunity to measure the desired box sizes to accurately;
- ease of work;
- The price for work will be reduced.
By minuses include the possibility of damage to the laminate.
Thus, unambiguously answer the question that first laminate or the door is quite difficult. The procedure will be required to determine independently, based on factors and preferences.
However, the easiest and most cheap option is the initial floor setting. Such an order of action will allow you to perform all the procedures quickly and carefully, especially if the construction master works.
Article on the topic: How to grow a pumpkin in the country