Malyary roller - a tool that helps speed up the staining of walls, ceiling, floor. But it is difficult to achieve an ideal result of uniformly colored walls without inclectures and the bands is quite difficult if you do not know some secrets and the subtleties of the process.
Experienced masters celebrate a few moments, taking into account that you can get perfectly colored surfaces without stripes
We choose a roller right
The paint tool differ in size and material of the soft part (fur coat). So, the more stained surface, the wider the roller must be used (maximum size 30 cm).
Depending on the paint used, a certain type of "fur coat" of the roller is selected. The tool with a foam soft part is ideal for staining with dispersion compositions. You should not use this tool for emulsion paint (in the process of applying the paint is saturated with air, after which it lies on the wall with uneven stripes).
Get uniformly painted by oil or emulsion paints, the ceiling will help the roller with a velor soft part.
Also on the type of surface of the surface, the length of the pile of roller fur coat is selected. For smoothly plastered walls, the ideal option is 6mm, for structural wallpaper - 15mm, for brick walls or concrete blocks, a tool with a pile of at least 19 mm is well suited.
Secret: No matter what material is made of a soft part of the roller, before first use the tool is necessarily soaked for several hours in the water, and then dry carefully.
We prepare the surface to paint the roller
In order for the paint to lay exactly, without stripes, the surface before painting should be carefully cleaned and covered with primer. The protective layer is applied several times.
Article on the topic: Top 10 Lifehakov: How to create an expensive interior with a modest budget
ATTENTION: Only acrylic or water-emulsion formulations of primer are chosen to protect the plastered walls.
Cooking paint
Paint in a can, after long-term storage in stock, settles. The thick precipitate is unevenly distributed over the wall, forming unattractive stripes. To make paint easily, it must be mixed thoroughly before applying. Easier, faster and high quality, mix the paint in the bank will help the nozzle mixer for a drill.
How to dial paint on roller correctly
The paint is poured into a special pallet with a layer that does not cover the axis of the roller wheel. The tool plunges into the paint, and rolled through the pallet. So the roller is gaining enough paint.
You can avoid leaks, stripes and spray, if the roller is slightly rolled in the pallet, and then several times on a clean surface of the board, drywall.
Secret: paint need to pour as far as possible at the level of the axis of the soft part of the roller. An overly small amount of paint, as well as chaotic movements along the surface of the surface are the most common cause of the appearance of ugly bands on the wall.
Observe the technology of painting
Experienced masters advise before the start of work conditionally split the wall on the sectors, and in the first place of the upper, right corner. Paint is applied in several layers. The first time with vertical stripes, the second - horizontal, and then vertical again.
Important: In the process of staining, it is not necessary to put pressure on the roller. All movements must be smooth, neat. It is necessary to avoid chaotic smears to prevent the lanes on the wall.
Adhering to the tips of the craftsmen painting the walls of the roller can be turned into an exciting occupation with a result of high quality.
Do not rolling the wall without looking at this video (1 video)
Painting of the walls with roller (11 photos)
