Getting Started, the first question that concerns everyone concerns dismantling. In addition to the fact that during the dismantling in the apartment a large amount of dust and dirt, he takes enough time.
Is it possible to disassemble the floor covering if linoleum acts as the latter? To answer this question, it is necessary to pre-conduct an estimate of the state of the old floor. But in what cases can Linoleum be laid on linoleum?
Tips for specialists
It is impossible to put a new floor covering on the old, if there are explicit defects in the form of cracks. The latter indicate that the rough base was not prepared properly and has sharp drops of height or irregularity in the form of depressions and bulges. Therefore, it will be necessary not only to remove the old floor covering, but also to align the draft floor.
Another factor to take into account the state of the substrate. According to the technology of laying linoleum, its steles on the substrate. Over time, she can deform. After a while, repeat the form of the substrate itself. And then the flooring will have to be replaced with a new one.
Control the state of the substrate during operation is not possible. Therefore, before installing a new floor, it is necessary to make sure that the substrate is in proper condition.
If there are no explicit defects, and the integrity of the old decorative coating is not violated, then the question can lay the linoleum on the linoleum, the answer will be affirmative.
Choosing a new coating
The modern market is filled with a huge number of the most diverse design options. They differ in dimensions, namely width, and pricing policies. You should not choose subtle options that even the most minor defects will repeat. In addition, this option must be immediately discarded if there are cracks on the old coating.Article on the topic: Procedure for troubleshooting in the work of plastic doors
The presence of an old linoleum does not indicate that you do not need to use the substrate. It is better to purchase that building material that already has a substrate. It is desirable that it was wide enough. The thickness of the working layer should not be less than 2.5 cm. Otherwise, for a long period of operation, it is not necessary to calculate.
Preparatory stage
Even if there is no need to dismantle the old flooring, certain preparatory work must be carried out. These include dismantling the plinth and connecting planks. These elements can be reused, but against the background of a new decorative coating, it will be seen that the plinth is already nonsense.
If the dismantling of the old material, despite the presence of cracks, is not executed, the latter need to be filled with sealant. Subsequent works are carried out only after the sealant is dry.
Mounting work
Do not start styling the building material immediately after its acquisition. In warehouses, it is stored in rolls and takes the appropriate form. Therefore, in the apartment it needs to be deployed and leave in such a position for at least one day. After the material is leveled, you can start laying.
The new linoleum must be laid in the room in such a way that one side is completely adjacent to the wall. It is very important to make sure that the floor covering lies at exactly. If it has a drawing, then it should be placed parallel to the wall. We produce trimming the second side.
Experts are not recommended to immediately perform a trimming. It is better to leave the stock in 5-7 centimeters, which then will easily cut. Cropped linoleum with a construction knife. To cut a smooth blade should be sharp. Therefore, it is pre-prepare several new replaceable blades.
You can, of course, measure the parameters of the room, make marking directly on the construction material itself and trim according to the markup made. But apartments with smooth walls are extremely rare. Therefore, pruning is advisable to produce directly along the wall.
Article on the topic: Features of the valves of various modifications
If the room is quite large, then the linoleum bands will have to be allowed. This can be done in different ways. The first way implies the use of an iron. Two bands are stacked in such a way that there were no gaps at all. It is pre-shawls a cleafean film. Next, the joints are closed by a newspaper to which a hot iron is applied. This method is applicable if Linoleum has no substrate.
Specialists use a construction hairdryer instead of an iron with a special nozzle. The decorative coating strips are located in such a way that there is a small gap between them. A cord is refilled in the pension nozzle, which goes along with a decorative coating party. This cord is placed in the gap between the laid outdoor coverage strips.
A simpler and accessible way - liquid nails. The adhesive is simply poured between linoleum stripes.
Mounting operations fastening the plinth.
According to the technology, the linoleum must be put on the pre-prepared surface. Answer unequivocally to the question whether the linoleum can be put on linoleum, experts cannot. It all depends on the state of the old decorative coating. In addition, it is necessary to take into account the fact that each floor cover has its own operational period.
You can put a new coating on the old one, which lies about five years. But is it worth doing this if the old floor covering is 15 years old? In this case, it is advisable to dismantle the old flooring, and put a new surface to the surface prepared for all rules.