On the floor in the hallway daily affects the mass of adverse factors, ranging from heels and soles, ending with cleaning agents, water, dust, sand and salts, brings from the street. For a plot that is subject to such loads, you should choose a resistant flooring.
With serious loads, the tile is perfectly coping with. The unpopularity of such a decision is due to the fact that another two years ago the material presented on the market did not differ in an attractive appearance, and it was for this reason that he was trying to use it only for acute necessity. At present, the situation in the root changed. The design of the floor in the hallway from the tile solves many problems. The modern building market is ready to offer all those wishing a wide range of tiles of various shapes, sizes and versions. Such a variety will allow you to choose a material that will become an integral part of any interior. At the same time, a nice tile exceeds on its operational properties even the highest quality and expensive laminate or parquet.
Advantages and disadvantages
The design of modern tiles is distinguished by a large manifold. There are models, imitating color and texture of natural wood or stone. Also occurs a tile with an unusual pattern or print. Competently selected material will emphasize the strengths of the interior. Moreover, the floor for many years will not lose its attractiveness and will look like a new one.
Among other things, the floor of the tile is easy to wash, it is not terrible chemical cleaning agents and mechanical loads.
But as well as any other coating, the tile has its drawbacks. This material is hard and cold, it is not so pleasant for it, such as, for example, on a wooden board, laminate or carpet. With an excess of tiled coverage, the floor design of the hallway can be too sullen and cold. For this reason, this material should be used on a small area.
To make the floor reliable and durable, it is enough to cover the tile of a small fragment of the room near the threshold, which accounts for most of the load.
Hallway design with tile floor
Tile can be used to separate the space on the functional zones. With this material, it is advisable to highlight the shoe zone, which is located near the threshold. The design of the hallway can include a combined floor finish. Moreover, the use of two types of floor coverings visually add space of free space.
The tile floor should harmoniously complement the design of the hallway. Ceramic material should be combined with the main flooring, which in turn should be an integral part of the space.
How to choose a tile
When choosing tiles for the hallway, the following factors should be taken into account:
- Resistance to the effects of moisture and abrasion. Porcelain stonewares have these qualities. He does not absorb moisture and has a homogeneous color to the entire depth of the plate;
- Non-slip. In order not to turn the hidden risk in the zone, it is recommended to make a choice in favor of the material with an anti-slip indicator of R10 or R11;
- Color and texture. Color and texture have not only decorative meaning. During operation, the relief of a light texture cover can be clogged by mud, which can spoil the design of the room. The rough surface, among other things, makes it difficult to clean the room.
Article on the topic: Floor color challenges - a combination of house elements
Of course, any tile is cleaned with the use of aggressive detergents, brushes and abrasives. But that the need for such measures arose as less as possible, one should give preference to the textured porcelain stoneware of dark shades. You should also pay attention to the grout color. The joints of the plates over time are also contaminated and it is not always clear to clean them.
Glazed and polished porcelain stoves look spectacular. However, they may be attendant, since their smooth surface does not interfere with slipping.
It will be better to make a choice in favor of embossed surfaces that fit well into the design of the room.
Combining two flooring
As noted above, the tile in the hallway is the entire appropriate material, but only in a limited volume. As the main flooring, it is better to use parquet, laminate or, for example, linoleum. At the same time, the plot lined with a tile may be both on the same level with the floor, and it is a bit tower over it. It should be noted that such an elevation should not exceed 3-5 centimeters, otherwise such a designer moves can turn the hallway in a very attendant place. The elevation or podium can be done using a construction mixture for a screed or even conventional tile glue.
The selection of the shoe zone has a functional value: none of the owners and guests will not go out in dirty shoes for the limits indicated by the zone.
The connection of two types of flooring can be linear and figured. The first method provides for straight lines of the joints and requires less effort to implement. When creating a curly border of coatings, a cutting of plates and a product of non-hard calculations may be required. But additional efforts will be rewarded with the original appearance of the interior.
The design of the figure shake should not cause difficulties or problems. You can easily find flexible docking thresholds that are capable of accepting any shape. With straight joints, it is much easier to work, especially since the assortment of docking parts for them is an order of magnitude wider. The docking threshold can fit the color of the tile, plinths, furniture fittings, or the main flooring. This approach will make the design of the hallway harmonious and concise.
Article on the topic: Cork sex: Advantages and disadvantages, design ideas
Video Gallery
Photo Gallery
