Modern technologies for the manufacture of sanitary devices allow you to fill the building materials market with a variety of unitasis models.
Sanitary devices are varying by modifications of drain tanks, manufacturing material (porcelain, faience), a mounting device, the location of water supply and drain release. In most cases, bathrooms and toilet rooms are discharged with tiles.
The cafeter covers the walls and floors. How to fix the toilet floor on the tile floor to stood firmly on its basis? In this article we will give the reader information on how best to do it.
Preparatory work before installing the toilet
Get the most convenient toilet pipe length
The drain sink is installed when the works on the facing of the walls and the floor with ceramic tiles are completed.
If you install the plumber first, and then proceed to the flooring device from ceramics, you will have to do a rather complex cutting in the stoves for the base of the base of the pudestation of the plumbing device.
This will cause the risk of damping damage with the unsuccessful selection of carved tiles.
When lining the walls and floor with ceramic tiles, it is necessary to achieve a convenient length of the protrusion from the wall of the tap pipe.
The release of the tap pipe should be so that you can install a locking crane.
The sewer plums can perform both from the wall and from the floor. The sewage sewage must provide a hermetic connection with the corrugation.
Required tools and materials
To successfully execute the task, you should be patient and prepare the following set of tools:
- Perforator, drill;
- marker;
- dried on glass and ceramics;
- dumping;
- sealant;
- spanners;
- key adjustable and cape heads with a gate;
- Dowel with self-drawing;
- Passatia;
- corrugated pipe;
- crane;
- Kern;
- grinding with abrasive circle;
- Connecting hose.
Article on the topic: Installation of interroom doors of two-sided (video)
Installation of toilet on tiled floor
Installation of toiletza
The installation of the toilet to the tiled floor makes in different ways, depending on the position of the mounting holes in the shell pedestal.
There are three options for fastening a plumbing device to ceramic flooring:
| № | View of the fastening of the shell | Method of installation |
|---|---|---|
| one | Vertical entry of samorezov | Installation on dowels |
| 2. | Side location fasteners | Application of mounting corners |
| 3. | Printing the base of the pedestal | All models of shells on warm floors |
Installation toilet bowl with vertical mount
Most models of drain sinks are made with mounting holes for vertical fasteners. Installation of the sink is carried out in several stages:
- To the clean surface of the tiled floor put the toilet, the maximum move it to the wall or in the angle of the toilet.
- Make the properties of the corrugated tube to connect the drain of the shell with the release of sewage. In case of identifying difficulties, the reasons are eliminated.
- Check the correctness of the selection of the length of the plumbing connecting hose. If the hose was too short or long, it is replaced.
- The marker will turn out the basis of the pedestal. Also noted the attachment points on the ceramics of the base, lowering the marker in the mounting holes.
- Then the sink is removed to the side. The marked points on the tile of the roar, the rocky top layer of the tile. Drill on glass tile is drilled through. The concrete base is drilled by a perforator to a depth of equal length of a dowel.
- Obtaining the foundation of the pedestal is cleaned by Eatak. This is done also with the help of grinding with the abrasive circle fixed in it.
Prepare a hole under the toilet, rocking pieces of tiles
- Obtaining the base of the toilet pedestal is treated with emery paper or abrasive circle. It is necessary to do this carefully that the treated surface of the tile does not protrude beyond the base of the sink.
- The sink is returned to the place. Through the holes insert the screws with heads under the wrench. For convenience, instead of the key, use the cape with a gate.
- Shell adjustment places for tiles are treated fine strip sealant. Moisture can no longer penetrate the pedestal.
- The self-tapping screws are screwed into a dowel, constantly controlling the density of the adjuncting of the shell to the cafée on the entire foundation of the podium. Plastic caps are put on the screws of the screws.
- The corrugation is put on the drain of the shell. The other end of the flexible tube with the cuff is inserted into the sewer pipe. Check the density of the compounds. Sometimes when installing corrugations, the cuffs are covered with silicone sealant, but if the connections are sufficiently dense, it is not necessary to do.
- A drainage tank can be equipped with a lower or side connecting pipe. The hose with a wrench is connected with a nozzle and a crane.
- At the end of the work, the crane opens and check the density of all connections. When identifying any defects, they are immediately eliminated. For details on how to install a toilet on the tile, see this video:
Before mounting the toilet, the horizontal of the installation site is checked. If no deviations are detected, then the base of the base of the pedestal and the tile of the rinking of the sink is not made.
Side fixation toilet bowl
Installing the toilet with side mounting holes is somewhat different from the mounting of the sink with vertical fasteners.
The difference lies in the fact that the installation details are hidden under the instrument pedestal.
Install such an instrument model as follows:
- To facilitate the installation of the toilet bowl, double-sided tape is glued to the lower feather of the mounting corner.
- In the side of the side of the Nut inserted. Mounting corners are fixed from the inside the base of the toilet with the extended bolts through the side openings.
- The sink is pressed to the tile at the installation site. The bolts are removed, the toilet is removed from the installation site.
- On the ceramic tiles remain glued mounting corners. Through the holes in the horizontal parts of the corners, the core are planned locations.
- Corners are removed with scotch. The holes are drilled in the same way as in the previous method of installing the device.
- Dowels are inserted into the holes. Corners are fixed with screws to tiles.
- The toilet is installed in the design position and bolts through the side openings are fixed to the mounting corners.
- Bolts heads are closed with plastic caps.
- All other work performed in the same way as in the previous method of installing a toilet bowl with vertical fastening.
Gluing the base of the toilet bowl
To such a method of installation, it is resorted if the base of the floor is equipped with a heating system. There is a risk of damage to the heating equipment when drilling the seating holes. See in this video for more details:
In this case, stripping the foundation of the pedestal and the surface of the ceramic tile on the structure of the support of the toilet bowl is obligatory. This is done to increase the adhesion of glued surfaces.
Tight press the toilet to the floor
Glue to the toilet on the tiled surface with liquid nails. The surfaces are covered with glue, then they are pressed to each other.
The toilet is removed from the place of installation and put it. Withstand the time specified in the instructions. Then they set the sink into the place, pressed it to the floor.
The rest of the installation work is performed in the same way as in the previous cases.
Bring out the installation of the toilet bowl on the tiled floor on their own only in the presence of skills and experience in this form of work.
Article on the topic: Proper reflection of the ceiling in the car