Make beautiful and stylish chandeliers with their own hands for the living room is not so difficult. You will need pride-tailed materials, free time and a little fantasy. Who would have thought that the lamp made from plastic bottles or rings from beer cans is able to decorate the living room? Such a chandelier will look like no one guesses what you smeared it from it.
Make a chandelier with your own hands simple enough, you only need to make some patience and accuracy.
Plastic bottle chandelier
It will take:
- Thin and thick wire;
- cartridge and electrical wire;
- plastic bottles;
- round-rolls and pliers;
- sharp scissors;
- soldering iron.
First of all, it is necessary to make a wire lamp frame from a wire. You need to make 1 small ring with spacers and 1 large circle. Then it is necessary to connect the rings with arcuate struts, it is possible to do this with a soldering iron, but if such a job it seems to you too complicated, then take the connection locations of the parts with a thinner wire. Use the round rows to align the wire. If you wish, you can paint the frame of the aerosol paint or wrap it with a thin twine, but it is not necessarily.
Sequence of manufacture of chandeliers from plastic bottles.
From the plastic bottle, the neck and bottom cut off, maple leaves are cut out of the remaining part. It does not need to stick with one size. With the help of the soldering iron, it is necessary to melt the edges and draw bodies of leaves. The holes for the connection make a hot gypsy needle or shell. Next, they attach the leaves on the lampshade, for this purpose they use a thin wire. Leaves hang on the lower ring in such a way that there is a drop-down cascade.
Make a chandelier in the living room can be from the bottoms of plastic bottles. In this case, it is necessary to make a shade of 3 rings of different quantities that connect with a fishing line. The top (the biggest ring) is made with struts and a small ring in the middle (for the insertion of the cartridge). Next attach the average circle, the ring of smaller diameter is tied to it. The nodules ignore the soldering iron or lighter.
Article on the topic: put in order an old bath
Dneyshko is cut off from plastic bottles (it is best to use a transparent colorless or blue container). You must have beautiful five-packing flowers, if you wish, you can additionally cut through each petal. The edges either melt the soldering iron, or heated sand in a pan, then lowered a bottle flower into it, keep 1-2 seconds, after which they take out. Connecting holes burn in 4 petals of five.
The canvas are combined in a checker order, while the segments of the fishing line between the colors should be from 6 to 10 cm - then the chandelier will turn out openwork and light. The first and second tiers are performed in such a way that they cover the bottom ring, but the third (last) can be made in the form of a long suspension. Especially spectacularly such a chandelier will look in the living room with high ceilings.
High-tech chandelier
To fasten the rings from beer cans, you will need a soldering iron or wire.
It will take:
- Rings from beer cans;
- pliers;
- cartridge and electric shuffle;
- wire.
Make a chandelier for the High-Tech Living Room from ordinary rings opening from beer cans or canned food. For lampshar, you will need to make 2 rings of the same diameter from the wire (no need to connect them). The upper ring is made with spacers and a circle under the cartridge in the middle. Next, everything is very simple: all rings-openers are bend in half, the part is fixed on the upper circle.
Weaving are performed either in a checker order, or in the form of strips that connect with a thin wire. The first option is a bit more complicated, as each ring must be cut with pliers or scissors for metal. Then the cut edge is inserted into 2 adjacent (upper) rings, it turns out weaving in a checker order resembling the mail.
For the manufacture of the bands, it is not necessary to cut anything, the bent rings-openers simply insert each other on the principle of the chain, then the rows are connected using a thin wire (can be replaced with a cord). The lower edge of the chandeliers is fixed on the second ring, they draw the cartridge, attach the wires to the ceiling, the connection site is masked by the bracelet from the same rings opening. With such a chandelier, your living room will acquire a special charm and personality.
Article on the topic: How to sew the curtains for the hall with their own hands?
For the chandelier of the hangers you will need:
The sequence of wood chandelier.
- wooden hangers;
- wire;
- drill;
- pliers.
The chandelier in the style of high-tech from wooden hangers can decorate any living room. First of all, it is necessary to make a wire lamp shade from the rings of greater and smaller diameter (you can use the finished frame from the old chandelier). At the ends of each hanger, you need to drill holes for fastening. Then fasten the "shoulders" using a wire to the upper ring of the lamp, shifting them aside, and then climb to the lower circle. Each hanger is attached at an angle, while the subsequent detail should cover a little over the previous one. If you wish, you can paint "Holders", but it is not at all necessary, the chandelier and without it looks amazing.
Chandelier of rose and glass petals
It will take:
- Blinds of different diameters - 3 pcs.;
- Artificial rose petals;
- glue pistol;
- wire;
- Metal crimps;
- Leske.
The lamp of rose and glass petals looks very romantic. First of all, it is necessary to make a frame of a rings from wooden fives, they are bonded with each other with a fishing line (large, middle, small). Wire struts are inserted into the upper ring and the hole is made to insert the cartridge. A lampshade is preferably painted under the color of petals.
Next make garlands of petals. To do this, you need to cut the fishing line, stick (pairwise) with the help of a glue pistol of roses petals, rinse the glass between them, at the end of the garland to attach a drop-like bead.
If you want to place beads at a distance from each other, then use special metal crimps for fasteners.
Thus you need to make all the details. The finished garlands are tied to the frame at a distance of each other at 3-5 cm (depends on the diameter of the petals), the ends of the fishing line are hiding under the crimps. It turns out a beautiful three-layer design with a flowing cascade of beads and petals.
Article on the topic: Requirements for boiler houses in a private house
Instead of finished petals, you can use homemade, such fabrics like silk, atlas, chiffon are perfect for this purpose. The fabric is impregnated with a decoction of starch and simple soap, then cut the petals, give them the desired shape with the help of scissors (carried out with pressure from the edges of the part) or deepened with dispersion of metal bolts (a tool in the form of a ball with a handle for the manufacture of artificial colors).
The veins on the petals are pushing with a preheated sequel, while it should not be too hot. The manufacture of chandeliers with their own hands is an interesting creative process that will help not only save, but also spend time with benefit.