Replacing interroom doors or input design often results in confusion, which is detected in the opening of non-standard sizes. It is on hand, because by decorating the free space by fraumgas made by your own hands, you can revive the interior and give freshness to the whole room.
Location Framug in Operation
Framuga is a constructive detail that can go bundled with the door block and be an autonomous registered element.
Sliding interroom doors with Framuga
The functional purpose of the insert is reduced to filling out the opening of non-standard size when it is too high or wide. At the same time, not rare, the designer flight of fantasy uses the element in question as decoration of door structures.
We know about all the varieties of Framug forms from here, as well as about the types of material used to create such an attractive part. So, in this publication, let's talk about how to make it with your own hands, and while we consider in more detail the functional affiliation of an unusual decor.
If the insertion of the doors with Framuga in Stalinka buildings is a forced designer solution to fill out the free space of the opening from above or with one of the sides, which does not block the standard dimensions. That in the construction of a modern type of opening makes specially enlarged so that by decorating solve several options for tasks:
- Framuga over the entrance door naturally illuminates the inner space, by hitting light from the street through a glazed insert. The same applies to interior blocks of overlapping adjacent rooms.
Framuga in the opening of the entrance is illuminated
- Arched doors with Framuga in an enlarged version give a visual solemnity of the structure if the input unit is a block, and an inner room, if the design of the interior use of use.
- Due to the lumen over the door, it is permissible to illuminate the ceilings.
- Framuga can perform the role of decoration at a time with its practical use in the form of a hidden mezzanine. Thanks to the thickness of the wall, part of the opening can be used under a small locker with the door.
- On deaf framugs, it is permissible to install video surveillance, intercom and other additional accessories of security feature. This option is preferable to install the equipment than to spoil the adjacent walls and their finish.
- The insertion of the doors can be functionally active, that is, used as opening items to carry out the premises.
Nevertheless, Framuga, primarily carries a decorative functional load. The usual door design of the standard size, thanks to the insertion from any of the sides, becomes the main decoration of the interior stylist.
Decorative focus on the entrance door
Regarding the location of Framuga in the doorway, there is a lot of options to beat the passage:
- above the door block at the top;
- with one of the parties;
- on both sides of the stems;
- Complete combined option for decorating opening.
Framug location options
When selecting the optimal option for decorating the opening, it is permissible to use any form of fraumug in a constructive plan: arched, trapezoidal and other. The form, as used material for the manufacture of elements, is selected relative to the size of the height and width of the lumen in the wall. In a decorative plan, the insertion of the doors is adjusted, first of all, under the stylist of the door sash itself.
Preparation for the manufacturing process
It happens that the door block itself will appear in the finished form earlier than the bright idea arises about such a harmonious decoration of the opening in the form of fraumuga.
The doorway turned out to be great than scheduled
There may be such a misunderstanding, as an increase in the opening when dismantling work, when the replacement of interroom doors, carried out a part of a non-professionally installed wall.
It is worth noting that the replacement of interior doors of a large width of a swing type to sliding doors with a reduced sash width size, the problem of free space can solve in small-scale apartments. And part of the released opening just can be closed by Framuga.
Installation of doors, combined type of manufacturing with framuga factory-proof, is no different from the usual installation process. But the option of forced use of fraamuga changes the whole process to reverse.
Products of factory manufacture
The insertion of the door can be ordered from any material and any type of configuration from any car joinery and even on the door factory. Do not give up and go to unforeseen extensions, because Framuhua can be made with your own hands.
A homemade wizard can scare the visual complexity of the door insert manufacturing process. In fact, work is not so terrible if approaching the process from the creative side. So to create a decor element need to be prepared:
- pick up the stylistics and form of fraumuga;
- Determine the type of filling: make a detail deaf either with glass inserts;
- Collect all the necessary tools and patience.
We advise you to stop your choice on Framuget with glazing. After all, the process of creating with your own hands is completely identical, and the decorative composite final result will exceed all expectations. Arched doors with glazing, as we know, are equipped with inserts of a single style and quality.
If the glass for interior doors was selected earlier by the manufacturer, then we recommend strengthening the composition, inserting a stained glass in fraumuga.
Stained glass glass in Framuget made by hand
Stained glass windows will actually come to any door in the most diverse style of creating. The cost of finished stained glass windows, especially in individual sizes, pulls the lion's share of the cost of creating fraumuga. How to create stained glass windows, not carrying financial losses, you can find out from here.
Required Material
For self-improvement of structures, be it sliding doors, swinging or bivalves, to create fraamuga requires a single set of tools:
- bar for box;
Foreign tools set
- A set of plastic or wooden wedges;
- platbands and dogs for opening;
- screwdriver and self-tapping screws;
- mounting foam for filling the gaps between the block and the wall;
- silicone sealant for glazing;
- Strokes for fixing glass and finishing nails;
- Roulette, pencil, jigsaw.
Additional tools may be needed, for example, to beat the irregularities of the walls of the opening and so on. In this case, you need to look after the start of work, and prepare inventory. Next, we will create, and mount fraamugu, which will block the span at the top between the door box and the opening wall.
Production and installation work
Pre-installation of the door block
Before being created, and later, the fraumuga is installed above the door with their own hands, it will be recommended to take care of the preliminary installation of the door itself. It is the door box that will become a foundation for insertion.
Framuga is made with their own hands in just a few stages:
- The measurements of the finished door box and span are carried out: the width of the Lutka is removed, and the height of the span, which you want to fill the fraumuga.
The width of the door product log is removed if the open over the door block of single parameters. That is, if there is no plans to make fraamugu in width more of the design itself, then the dimensions are worth removing accurately.
- Create a box for glazing from a bar regarding measurements.
Winged under the sizes sizes are laying out on a flat surface, for example, the floor. We grab the details with self-draws, but do not reach out to the end. We give some freedom of movement of the design in order to fit it at the installation.
- Install the framuga box to your place above the door block.
To align the frame in the level, we use prepared wedges. Manifested gaps can already be filled with mounting foam and calmly wait for its complete drying.
Meanwhile, it is permissible to prepare glazing. More precisely, the stained glass glass is cut on the place when the box is installed. This is how it will be possible to remove more accurate dimensions. But the masters of his business, of course, do it in advance, and only then provide the opportunity to decorate the glass.
Insert glass stained glass fastened by strokes. We preliminarily enjoy the perimeter of the glass with a sealant so that when opening and slammed the door, it has not been rattling.
Fixation of glass strokes
If you like everything after installation, you can safely begin the installation of volunteers and platbands that will block the defects of self-installation.
The opening over the door, which radiates natural or artificial lighting from adjacent rooms or from the street, optimizes the functionality of the door structure itself. Framuga is permissible to make deaf and insulated, but where is the decorative, pleasing eye, beauty.
(Your voice will be the first)
Loading…
Article on the topic: How to sew a cover on the chair for feeding so that it is convenient?