In Russia, the blinds made from the fabric are widespread due to the fact that the lamellas can have the most different colors and any type of texture, as well as the density level, etc. Fabrics for lamellas can be cotton and any other. Make a fabric with your own hands blinds very simple.
Vertical fabric blinds are widespread due to the variety of design options and ease of use.
Blinds are a multi-level system based on regulating strips of lamellas in the most thorough way. This will protect the room from the bright rays of the sun. There are horizontal and vertical types of blinds. It depends on the method of installing strips lamellae into the design of the blinds.
Materials for the manufacture of blinds and the procedure for performing work
You can make blinds with your own hands, if there is a cloth or plastic at hand, aluminum can be used.
Fiberglass is made of glass fibers, such fabrics are not affected by moisture, do not burn and serve for a very long time.
Sew the blinds from the fabric is the easiest way, in this case it is better to produce a vertical design. Choosing a fabric for making blinds, be sure to look after how dense it is.
The service life of the lamellae will be directly dependent on their density. At the same time, this indicator has a basic influence on the value of the material. It is better not to spend time to choose a nonwoven material because it is subject to the influence of humidity and can quickly spoil.
If you wish, you can buy a fiberglass to the kitchen, which is a fireproof to the greatest extent than other types of fabrics. When burning fiberglass does not release harmful substances. You can not apply for processing water-repellent impregnation, as for other types of tissues. On the sun fiberglass capable of keeping his color for a long time.
In any specialized store you can buy a slider that is a component for blinds. From the quality of the runner installation will depend on the quality of the blinds, which can affect the quality of the runner itself. As a material for the manufacture of shutter runners is plastic.
Article on the topic: how to hang the shelf on the wall with your own hands in 5 minutes
Before making blinds, make the pattern. It needs to cut the material so that each detail is neat, otherwise defined errors that should not be allowed when sewing. When the canvases are already carved, then for further manufacture of blinds, they should be used on each side, flexible material not more than 2 cm.
Next, begged for the manufacture of fasteners when the strips are already linked. Then you need to stretch the shoelaces, with which the lamellas should be moved. The slider is fixed in advance to the eternity so that he can move freely, and on the other hand, the lamellas cling to it. The finished product should be securely fixed on the cornice, after that they can be used.
How to make blinds do it yourself for loggia
Scheme pattern rolled curtains.
The best solution when choosing options for blinds can be called rolled, which are ideal for loggias. Making them with your own hands, you can save, making the interior of the loggia fashionable. If you make them yourself, then the product will be not only beautiful, but also convenient.
Facial and involves can be made of two pieces of fabric. You can take the material of various textures and colors, which will create a designer masterpiece. You will be useful:
- the cloth;
- threads;
- scissors;
- pencil;
- centimeter;
- stapler;
- tracing;
- Self-tapping screw;
- screwdriver;
- Bar (2 pieces - with a circular diameter and square).
The diameter of the round bar can be 1.5 - 2 cm, and the cross section is square - about 2 x 2 or 2.5 x 2.5 cm. Instead of a round-shaped bar, an iron bar can be used. You should not choose a rod with a large mass, otherwise the blinds may fall.
Starting work should be started with the definition of all product sizes. The accuracy of all measurements will depend on its quality. The width of the product should be taken by the corresponding size of the opening. The increase will be about 2 - 3 cm on allowances on all parties. The length of the blinds will correspond to the height of the window opening with an increase of from 10 to 15 cm and about 2 - 3 cm on the seams. Caper or cotton will be raised from the fabric.
Article on the topic: Wallpaper with flowers: photo in the interior, flowers on the wall, large poppies, roses, small bouquets, white peonies, 3d red and pink, watercolor, video
The design of the rolled curtains is easy to perform and allows you to create a truly designer window design options.
A rectangle is cut out of paper or tank, given all sizes. After that, the part is applied to the material from its inside, attaching with sewing pins every 10 - 15 cm. The pattern is gently sticking with their hands and rub in chalk. After that, they resume about 2 - 3 cm from the made line made to circle the part. All this must be repeated first with an injalial material.
When the curtains are uncalled, then all pins should be discrank. The two parts obtained are the front parties to each other, and then stitch them, making a line on the sewing machine. It is necessary to take three times from three sides, and the fourth leave to turn the part. When it is turned on the front side, the item should be very good. She will be the basis for blinds.
At the next stage, roller blinds are fixed on the frame. To do this, the basis of the fabric is unfolded by the front side to the surface. Next lay out one end of the base of the square shape bar, the width of which is less than the width of the part of the fabric by 3-5 cm. Having reached the top edge of the base, the bar wrapping the cloth. After that, using the furniture stapler, fasten the fabric to the bar.
How to treat the bottom edge of the blinds and finish
For a uniform distribution of the blinds throughout the window and the beautiful folding of their folding, it is necessary to enter the main detail below, the width of which corresponds to the width of the window opening, wooden or metal round timber. The timber must be shorter than the base itself by 2 - 3 cm. The lower edge of the fabric is wrapped at 3 - 3.5 cm, stitching the product at the bottom. Pre-make manual light seams, and after that it is paved on it. Threads after manual seam are pulling out, to make in a lapse.
Article on the topic: Lining with your own hands: DIY
Tags for registration of rolled blinds can be made of contrasting tapes or wide braid.
For decorative design, blinds can be used beautiful and easy to perform garters. Garters will not break, they are easy to remove to wash. You can also stop your choice and on the complex roller mechanism. At the same time, various rings for decorative trim are introduced into the design. There are many ways to decorate rolled blinds. You can use and garters, which is one of the acceptable options, since they can be removed and wrapped, you can not break and just do.
You can use a cloth or wide braid. They should approach the basis to the base, if you need a classic option. For the style of Modern it is better to choose a contrast finish. After that, there is a double width of the curtains with an increase of from 30 to 40 cm on the selected materials. It is not necessary to make a paper pattern for creating garters. Strips should be carved, which will have a width of 6 to 8 cm. They are folded by the front side inside, flashing after that on each side so that you can turn them on the front side with the invalid.
When the products are already swallowed, the garters are fixed by retreating the same distance from both edges of the ramp. This should allow to provide even support for rolled blinds. Return them by applying stapler for furniture. The bar, which was attached to the top of the curtains, from its bottom side with the help of a screwdriver is fixed to the windows frame.
When the curtain will be reliably reinforced, the interior will have a new improved view thanks to the new part. You can ask anyone to turn off the resulting rolled blinds into the roll to tie it on the necessary height.