To hang curtain, you will need to follow certain rules. Under Gardina is a cornice. This device allows you to hang curtains by moving them vertically or horizontally.
No bedroom costs without curtains, so that the curtains can move vertically or horizontally, use curtains.
Tips from designers
To correctly hang curtains, it will be necessary to consider that there should be a distance of 5 cm between the top of the window and the eaves. The choice of the product being installed after removing the measurement. Installation procedure takes about 15 minutes. If such a job has not been previously executed, then the installation time of this product may increase to several hours.Mounting the eaves is carried out using a level, roulette, hammer, pencil, perforator.
It should be noted that the curtains are:
- Wall.
- Ceiling.
Installation of these products is carried out by the same technology. The difference between them is that the ceiling curtains are needed on the ceiling, and the walls on the wall.
To get the right and aesthetic attachment on any surface, you will need to buy a cornice for 30-50 cm wide windows.
Designers allow installation of eaves to different heights. The main thing is to consider that the closer the curtain will be to the ceiling, the better it will look. This indicator depends on the installation method and the fastener used.
Installation on the wall
Scheme of fastening the ceiling eaves on the stretch ceiling.
To determine the location of the cornice in relation to the window to the window, you will need to find the center of the window, measuring the same distance to the right and left (to the places of installing brackets). Cardins will be hung out correctly if the location of the fastening elements is initially carried out. To do this, it will be necessary to measure the length of the eaves, collecting it on the floor surface. The label is made slightly above the windows with a pencil. From this label, it will be necessary to postpone the distance to the eaves in 2 sides. Similarly, 2 risks in the horizontal direction are applied. As a result of their intersection there are points in which the holes are made.
Article on the topic: Cat house with your own hands (drawings, photos)
After determining the desired length, the cornice is cut with a hacksaw. All measurements are recommended to be carried out with a roulette. As for the consoles, they must be from the ends of the curtain at a distance of 15-20 cm. It should be noted that all points are deposited from the ceiling, as the eaves can be placed parallel to the ceiling. Otherwise, on an inclined ceiling, the eaves mounted on the horizon will be uneven.
Wall cornice installation circuit.
If the backed material is used for the curtain mount, then it will take a hole with a large diameter. If the walls are made of hypsobetone or foam concrete, then this figure is 12 mm. To do this, use the hammer. Such attachments have a large plus, which is to admit a significant error when drilling the hole.
Often it is necessary to choose fasteners yourself. In this case, it is recommended to use an internal thread anchor. To attach them, you need to make a hole with the corresponding diameter. Then an anchor is inserted into them. Since these elements provide solid fixation, their number, in contrast to screws, may be smaller.
As for the installation of string cornice, it is usually installed on the ceiling. In this case, it will be necessary to find out the place of its installation. Then the attachments are applied to the ceiling. With the help of a pencil make holes for fastening elements. In the holes, you can score plastic dowels, having screwing fastening screws. After installing the string, it is fixed and stretched. To do this, it is recommended to use the tensioner. It is on the mount.
A similar device is represented in the form of a simple tube, which moves through the thread due to the rotation. String curtain can easily be installed where designers do not advise the use of large-sized structures represented in the form of bagent eaves.