For various needs on the household site, various accessories are often needed: baskets, drawers, stands and much more. For many purposes, we apply to the country and the wooden pallet. It will come in handy in a variety of situations, containing minimum of material and it is easy to assemble in half an hour. How to make a wooden pallet with your own hands? What is needed for this? What instruments need to be used in this work?
Wooden pallet can be used for many needs, for example, in summer it is possible to dry mushrooms and berries on it, and in the winter it will greatly serve as a basis for a vegetable store.
The wooden pallet is used in the country for various purposes - it can be installed in a vegetable store, use in the summer for a ride of berries and herbs, etc. often it is installed in the summer soul, right on the floor or on the cement screed. This is the simplest design. How to do it will be described below.
Selection of material
For the durability of the structure, so that it can be used in conditions of constant walking in water, you can choose as the main material pine. Usually get well-dried bars and boards from this wood breed is not possible. Therefore, when working, you do not need to pay attention to some stickiness and gravity of the material.If after making the pallet put in the summer in the sun, 1-1.5 hours, then it will dry well. So, the main material of the design chosen pine bars with a cross section of 50 × 50 mm and the boards - 100 × 25 mm. Purchase them in the construction market.
Selection of tools and preparation of the workplace (Wooden pallets)
Wooden pallet diagram with dimensions.
Article on the topic: How to install a split system (air conditioning) yourself
To make a pallet with your own hands, you need to have or buy the following things: roulette, screws, pencil, hacksaw with canvas for cutting wood, screwdriver. To create even the simplest design, workbench is required.
If it is not, then you can use for sawing and marking of pine bars and planks a simple summer shop. Before work, put all the necessary materials and tools before work - it will save you a lot of time.
Pallet with your own hands: Stages of work
Start with measuring the length and width of summer shower. Then from the obtained values take 50 mm - the structure of the pallet should be less than the soul size so that you can remove and replace it if necessary.
Make markup on the material using a roulette and a pencil, and cut the material with hacksaw. If the parameters of shower 1200 × 1200 mm, then the boards (bars) should be cut into a length of 1150 mm.
For the strength and stability of the pallet, the bars base are set at a distance of 8-12 cm from each edge. The board lying on them should freely withstand weight in 150 kg so that the center of the construction is not a deflection.
Types of wooden pallets: A - Wooden two-star pallet on bars; b - two-point wooden single-walled pallet on bars; in, r, d - four-way pallets.
Put the bars on a flat surface, set the desired distance and start assembling: carefully put the boards on the basis and fasten them with self-draws to the bars. Note that due to the resinness of the material, the screwdriver may not start the screw to the end. In this case, you need to take a conventional screwdriver and your own efforts to bring the case to the final.
If there is an electric train, then you can pre-drill a drill with a diameter less than the caliber of the screws of the board and bars, and then screw the fastening elements with a screwdriver. Consistently collect all parts of the pallet. To obtain the same distance between the planks, you can use the rail with the desired thickness.
Article on the topic: How to make a warm floor in the bathroom from heating in the apartment
By attaching the board to Brus, apply the rail to it and the following bar is fixed by setting it close to the free end of the homemade "template"
After fixing the last board, you can set the pallet into a shower.
Applied Materials and Tools
- Saws.
- Pine bars and boards.
- Electrock with drills.
- Screwdriver.
- Manual screwdriver.
- Hoven with canvas for cutting tree.
- Roulette or metal ruler.
- Pencil.
- Smooth rack.
Independent manufacture of the pallet takes 30-40 minutes.
Usually, if you need to do several similar designs for different purposes, the material is bought immediately to all the right amount. The size of the pallets may be different, but their manufacturing technology is the same.