Feeding beautiful curtains that are ideal for the interior, many owners face a problem, how to hang them exactly on the cornice. If the curtains are not hanging as it should, then the overall picture of the interior will lose its appeal. On the evenness of the attachment of the cornice itself can affect irregularities on the ceiling. After buying a suitable cornice to the curtains, it is necessary to determine how it can be strengthened on its own.
The main requirement in attaching the eaves is reliability. It is not recommended to hang curtains from heavy fabric to the ceiling eaves, it is better to prefer the wall design.
How to hang in the room cornice?
In general, the curtains have weight that has a direct impact on the strength of their attachment. When buying a product at a fairly low price, it is better not to use fasteners that are included with it. The cornice can disable and fall under the severity of the curtains that hung on it. If the walls are made of brick, then it is better not to use plastic plugs when attaching plastic tubes that will not be able to withstand the weight of curtains and eaves, departing with screws from the holes in the wall.
Scheme of installation of a cornice of a duralum profile.
The most reliable type of fastening is the tubes of wood impregnated with resin. With their help hung the cornice that will be kept very tight. The fastening of duralumin eaves is usually made closer to the ceiling surface. If the surface is perfectly smooth, then this type of fastening is most convenient. If there are convexities on the ceiling, it is not necessary to strengthen the product too high, since all uneven places will be noticeable more.
The cornice must be strengthened so that it is not a hindrance to the free opening and closing of the window. If the presence of additional parts, that is, either hooks or hooks, prevents the use of the window or window, then the product should be hung much higher than usual. Curtains together with the cornice will not prevent the free opening and closing windows with its close location.
Features of observance of symmetry
Determining the distance on which the eaves need to hang, occurs at the level of symmetry thesis. If the best product option is already selected, then the vertical distance, which is the difference between the window opening and the surface of the ceiling, at the symmetry thesis level differs when attaching.
Article on the topic: Bright carpet in the interior: How easy and easy to bring paints to your apartment (37 photos)
The location of the eaves for curtains.
The choice of fastening method is associated with all the features of the installation. Set the eaves for plastic windows, using a wide washer as a gasket that can sufficiently increase the existing area of the product under the pressure of the curtain on it. If you do not use the washer on time, then the product will not be able to stay on a screw with a too narrow head, so the risk that the curtains fall, is quite large.
If the walls are held vertically the heating pipes in the corners of the room, they will be no interference. Choosing a product, you need to check the depth of the fasteners in order to enhance the pipe, that is, their necessary size, which should be enough. In this case, it is impossible to assume that the cornice body comes into contact with the pipe. High temperature in the pipe can spoil the entire surface of the product.
By acquiring cornice, think over in advance, as it will correctly strengthen it, because there are many options.
Bad renovation and chic curtains for the curtains will not harmoniously look at the common wall background, they will spoil the view of the room's interior. To hang the product in the bathroom, you will have to strengthen it to the facing, making the hole on the tile.
Between the wall and tile remains an empty place, therefore the self-sizes of small sizes are not suitable for strengthening. In the case of the use of self-tapping screws, the eaves will be reinforced not to the wall, but to the tile itself and at some point will fall with tiles. It is more convenient to use selflessness with a large length, and therefore it is better passing through the wall.
Instructions for installation of the cornice
Corresponding scheme for curtains.
If it was discovered when buying a carnis lack of certain parts, then they can be replaced with metal corners. Such devices allow you to strengthen it well, but the use of the corners can spoil the appearance of the room. Before starting the installation, select the fastening method, that is, to one wall or to two opposite walls, located perpendicular to the window.
After that, check whether the cornice will interfere with the window to open the windows. To properly install the console, it is necessary to retreat 10 cm from the up window, following the curtains to touch the radiator or window handles. For fastening the design, it is pregnant with a line with chalk on the surface using the level and a long ruler.
In places remote from the window located on the left and right, you should mark points. Having made the necessary labels, gently fasten the brackets. After that, the cornice should be fixed, aligning it in length. If it is planned to strengthen it on the ceiling, then there are places where the brackets will be installed. The distance from these points to the window should be the same.
Article on the topic: Overhaul of the balcony with their own hands in the panel house: the right recommendations
In the noted points begin to secure brackets with the subsequent installation of the console rods on them. If it is necessary to secure the system between the walls, the desired distance is measured, ranging from the angles of the wall and from the ceiling. Then make special marks in the form of neat points. You should fix brackets, focusing on the marks, and after mounting the bar. With the length of the console, more than 2 m should be put additional brackets in the middle so that there is no risk of falling curtains.
How to hang eaves to stretched canvas?
Scheme of mounting ceiling eaves to the stretch ceiling.
There is an erroneous opinion that it is impossible to strengthen the product on the construction of the stretch ceiling. Corresponding can be made using PVC film and without experiencing special difficulties. It should be noted that the place where it is necessary to suspend the product.
Anyone may assume that a thin PVC film will not be able to carry out the load associated with the weight of the cornice with the curtains. But from such a situation you can find a way out. Used for the purpose of aesthetic design of the karnis rooms not only support the sound, but also carry a multifunctional load. Eaves for stretch ceilings allow you to visually increase the size of the room, and not only serve as the basis for the curtains.
Choosing eaves for stretch structures, you can see that they have few differences from ordinary. They have a kind of flat tire fixed to the surface of the stretch ceiling. The use of the eaves mounted on this surface allows you to limit it on the one hand, and on the other, it is visually assigned to it a certain completion. The design itself, not counting its design destination, should be a reliable fastening. Mounting the design to the ceiling is necessary, relying on a sound approach, since the location of the canvas after their installation will no longer seem possible.
Types of curtains for curtains.
The design of the cornice for stretch ceilings consists of two different parts. It is possible to strengthen the wall cornices upon the conditions that a duralumin clamp for strengthening a curtain or hook will not be able to break through the film. Much less risk of random damage in tissue ceilings, which are stronger. Strengthening the wall cornice for the ceiling stretch design is carried out, regardless of how close is the surface of the ceiling from the eaves.
Article on the topic: ASB Cable: Decoding, Specifications
You can use the product option to install hidden backlight. This uses a polystyrene profile, fixed to the wall with glue. On the surface of the eaves from the inside or the wall strengthens the LED tape, and the eaves is used to hide the backlight.
What kind of varieties of cornices are distinguished?
The ceiling type of karnis is divided into the following types depending on the material of the manufacture:- Wooden, which is an expensive, heavy product having the most representative view.
- Dulely, which is quite durable and easy.
- Steel, used to strengthen the curtain with a lot of weight. Steel and duralumin eaves can be decorated with special elements of plastic or wood.
- Plastic is the most common type of karnis for stretch ceilings. Differs in high strength, providing a slight movement. The cost is relatively low. This species is presented in the market in a wide range due to different colors.
Installing wall cornice for curtains
The most preferred is the method of installing eaves after completing the installation of the stretch design. There are several reasons for which it is more acceptable to hang in the room with a stretch ceiling of eaves for walls:
- The high cost of installing the ceiling of the ceiling, which increases the cost of installing the tensioning canvas for 2 thousand rubles.
- If you install it on the wall, it will reduce the cost of installing the ceiling from the PVC film.
- Since the installation on the stretch ceiling disrupts the integrity of the film, making it water permeable.
- If you plan to install blinds on the windows.
If you have a variety of different configurations of wall eaves, they have a relatively low cost. If you choose your choice on a conventional wandering product for a conventional ceiling, it will not differ from the cornice for stretch ceilings. The product is strengthened on the wall, and then hang curtains with rings on the shelf.
The most important thing is to pay attention when installing, at what distance hang eaves from the stretch ceiling. If the rings are deployed up with hooks, then they should not touch the canvas. If you stop your choice on profile products, they do not have differences from ordinary. At the same time, their design does not allow hooks to damage the tension ceiling film. Important When installing all the necessary security measures, so as not to cause any damage to the finish.