Recently, people are trying to switch to energy-saving lamps, as it is very convenient, environmentally friendly and economically. But faced with the problem of pollution of the lamp, which contributes to the deterioration of its work. Not always, when the brightness of the world is reduced, it means that the lamp itself has already been sick, most often it can just be contaminated. In that case, if the energy-saving lamp hangs on the street, the pilot that accumulates on it is necessary, clean, also in the bedroom, bathroom. In this article we will tell you how to clean the energy-saving lamp from pollution.
How to Clean the Energy Saving Lamp against Pollution
Note! In some situations it may seem that the lamp is dirty, but it actually happens that the LED lamp flickers. Flicker need to be corrected in other ways.Light bulb cleaning sequence
- Do not cost to clean the light bulb without twisting it from the cartridge.
- To work, use the stepladder.
- Check that the light has been turned off, the lamp should not be heated, expect 20-25 minutes, the temperature can be checked with one touch of your finger.
- For reliability you need a dry rag to remove unnecessary dust and dirt.
- Never wrap the lamp in the whole or partially, it hurts it.
If your attempts to extract the lamp remained useless, you should not be upset, maybe something from the above recommended items did not use, and it is worth repeating the procedure. Perhaps your lamp is most likely just believed, and it really is time to replace the new one. But to buy a new energy-saving lamp, you need to approach very carefully, so as not to doubt in your acquisition. Next time you know how to clean the energy-saving lamp from dust and so on. We hope that you could help you, and your light bulb has earned.
Article on the topic: Furniture from IKEA in the interior (56 photos)
If the tips did not help, then you can enlarge the brightness of the LED lamp, you will find detailed instructions in the relevant article.
You can also recall several features, initially you should understand that the dust on the lamp is visible. If it is not, then it is clean. You can check all this without much effort, for this it is enough to touch your finger to the hull.
Note! Economical lamps cannot be disassembled, in its composition they have mercury and other harmful substances that can harm the body.
How to install LED tape in the headlight.