Austrian curtains do it yourself - tailoring technology

Anonim

Throw and pompous, but at the same time, elegant Austrian curtains will decorate any interior. Soft drapets and original festo will turn any room in a stylish corner of comfort. Despite the seeming complexity of execution, such curtains can be used independently, the main thing, to understand the intricacies of the selection of materials and the technology of sewing.

Austrian curtains do it yourself - tailoring technology

Austrian curtains not only allow, thanks to their special lifting mechanism, regulate the amount of incoming sunlight, but are also an excellent decoration of any interior.

Briefly about the main thing

Austrian curtains are a popular variety of window curtains.

This original model came to modern interiors from the elegant and fasteners of medieval palaces. Thanks to spectacular appearance, they perfectly decorate any modern design.

Austrian, or Vienna, curtains is a cloth closing the window. Thanks to the curtain tape and the lifting mechanism, it easily rises up, forming beautiful festoons. Such curtains are popular and thanks to their versatility, with the help of a special mechanism you can regulate the degree of overlapping of the window opening, and therefore the flow of sunlight, which is especially relevant in the warm season.

Austrian curtains do it yourself - tailoring technology

Example 1. Pattern of Austrian curtains.

You can perform this model of the curtains from any material, thanks to elegant drapets, even the simplest fabric will look presented. In addition, the Austrian curtain can act as the main curtain or be supplemented with a dense curtain or lambrene. In each of the options, the window opening will look stylish and original.

Create a speed of this type can be on the cornily of almost any system. But most beneficially shades drapery the simplest rail cornice. It will provide ease of adjustment of height and will not distract attention from the original Austrian curtains. Also, consolidate such a curtain on a classic cornice for Roman curtains.

Article on the topic: Hangers in the hallway - wall, outdoor or panel

Choose fabric and auxiliary materials

The first and most important stage of sewing any curtains do it yourself - a competent selection of material. So that this model looks good and did not give trouble, to choose, listening to the following recommendations:

  1. The fabric must be translucent. Organza, veil, silk suitable. The weightless material will not allow to form beautiful drapery, and too dense difficult to access sunlight. Translucent Austrian curtains can be supplemented with dense classic curtains.
  2. It is worth paying attention to the drawing. Give preference finely not too catchy. A large drawing will "cut" drapery, and the effect will be lubricated.
  3. The cloth for the curtains of this type should be easily and beautifully draped, it is quite possible to check in place of sale. Too soft material does not forms beautiful Fald, and tough will make festers with rude and uneven.
  4. It looks original and decorated lower curtains. The fringe and beads, fiberglass and volan, depending on the style of the room, you can choose the perfect decoring option.

Austrian curtains do it yourself - tailoring technology

Example 2. Pattern of Austrian curtains.

So, the material is selected, it remains to determine its number and auxiliary elements. Acquire a cloth for sewing beautiful Austrian curtains needed at the rate of:

Length - from the eaves to the desired bottom point * 1.5 + reserve 5-6 cm for processing.

Width - width of the cornice * 2-2.5. This ratio will create beautiful drapery and festo.

For sewing you will need:

  • the cloth;
  • scissors;
  • Needles and threads;
  • sewing machine;
  • tape for assembly;
  • cords;
  • Curtain braid.

Sewing Technology of Austrian Curtains

Sew this curtains with their own hands is quite simple, especially for those who are close to sew. But the newcomer is able to cope with this, to study the order of actions and to follow it.

Austrian curtains do it yourself - tailoring technology

Example 3. Picture of the Austrian Curtains.

  1. At the first stage, it is necessary to carefully disappear fabric. This will avoid shrinkage, distortion and other misunderstandings in the sewing process.
  2. After that, you need to cut the cloth, lay a stock for the processing of lateral sides and bottom.
  3. Side the side of the edges by double podium, for example, 1 * 1 cm, 1.5 * 1.5 cm. Carefully swing the finished finish.
  4. Now you need to make marking sections. Traditionally, each section has a width of 25-35 cm in the finished form, and it means that you need to lay a small amount of Fald formation. Starting from one side, move to the opposite, making the marks from above and below the canvas.
  5. Then, focusing on these marks, you need to apply marking or notify the assembly flashes. The braid for traditional Austrian curtains is a ribbon with knockers in it. If you fail to find this item, it can be replaced by simple rings of a small diameter, brought to a small width of a small width. If you first sew the curtains with your own hands, it is better to purchase a special tape.
  6. After taking all the tapes and estimates of parallelism, the lines of the brain need to be sewn on the sewing machine double seam. The braid should not reach the edge, 3 cm will hide this functional part.
  7. After all ribbons with rings are sewn, you need to process the bottom of the web. It is also done by the double podium method, for example, 1.5 * 1.5 cm, which will allow fully overlapping the remaining stock.
  8. Now the Austrian Curtain is almost ready, it remains to handle the upper cut and sew a tape. To do this, the edge of the canvase is twice withdrawn, and the braid is tested. Standing is not worth laying out, they are formed after tiping the threads. If you first sew the curtains with your own hands, this detail needs to pay special attention, because the improper fixation can spoil the appearance of the curtain.
  9. Your stylish and original Austrian Curtain is ready. If it is made of lightweight fabric, you can sew small weights to the bottom, they will ensure the ideal location of the curtains in the window or doorway.

Article on the topic: Vegetable store with your own hands

Finishing stage

So, the canvas is processed in the right way, how to place this design on the window and form beautiful drapery?

First of all, you need to decide on the cornice. For conventional rail cornice, the tape will be quite enough. But if you decide to hang the Austrian curtains on the cornice for Roman, the braid will have to duplicate the terry ribbon, otherwise the velcro of the system will not hold heavy tissue.

You only have to turn the cords in the rings and hang the chart. For cords reliably fix the position of the curtains, they can be tied by a node or a bow, which will perform as an additional decorative element. If you plan to often change the position of the curtain, it makes sense to acquire special locksters or replace them with original and suitable clips, then you can easily change the lighting intensity and the degree of drapery.

In addition, you can purchase a special lifting mechanism that is attached to the top of the cords and is displayed on the side of the curtains. Then you can raise and lower it with one simple movement.

The Austrian curtain is a designer solution that can decorate any room, starting with the bathroom, ending with a pompous living room. The main thing is to choose the right fabric and carefully treat the sewing thinnesses. And just a few hours later, the magnificent and stylish curtain will be ready for their own hands.

Read more