In order to transform your home, you can resort to the help of photo wallpapers. How to glue photo wallpapers on the wall, if you do not have any information about this material and you are not aware of the novelties?
Modern wallpaper with a photoeffect is a decorative cladding on which a drawing or photo is applied using modern materials.
Manufacturers offer several varieties of photo wallpapers to their consumers: vinyl, on paper based, textile and on a flieslinic basis. Each view has its own characteristics, disadvantages and advantages.
For information
Paper wallpapers are made on a paper basis of photographic paper. Often, such wallpapers are covered with a glossy or matte protective film. Density is insignificant, as well as resistance to mechanical damage and influences.
Also, they cannot be cleaned with a wet tissue in the case of small surface contaminants. And to the benefits of paper photo arts, a wide selection of images can be attributed (up to personal photos, 3D) and high environmental performance.
Vinyl photo wallpapers are made on the basis of PVC.
The image is applied to the mentioned film, and its top is fixed with a matte or glossy protective coating. Wall murals on a vinyl basis are applied to the adhesive basis, as a result of which they are also called "self-adhesive."
They are created on the principle of stickers, it is worth separating the decorative image from the base, as they are ready for the installation on the wall. It is worth mentioning that such wallpaper must be applied only on an ideally smooth surface. They are often glued on glass, mirrors, laminated MDF, etc. The benefits of vinyl wallpaper are highly resurable to the effects of ultraviolet rays and moisture.
Wallpaper with a photoeffect produced on a flieslinic basis have a lot of advantages: they can pass air, moisture, steam and have sufficient strength. They differ and application technology: the adhesive mass is applied only on the wall. Fliseline photographes are in demand for the salary of children's rooms, due to the fact that are hyperalized in their composition. Also worth noting their low cost.
Article on the topic: How to make a wreath for the new year with your own hands from tinsel and paper on the door
According to the technology
And how to glue the photo wallpaper? Whatever wallpaper is chosen, a pledge of their high-quality stickers will be a thoroughly prepared surface. The working surface is aligned if there is a need for this.
Next, inspect the walls for the detection of cracks and, if they are, close them. After the surface is aligned, it is treated with a special solution - primer.
Such a solution must necessarily be of high-quality composition, since it should penetrate the structure of the surface and strengthen it, without leaving the film after this. Without the formation of the film, the wall remains vapor-permeable, it will ensure the penetration into the structure of the walls of the glue and will contribute to the solid fixation of photographic.
If you use poor-quality primer, then its penetration into the wall will be minimal, at the level of 1 mm, which can lead in the future to peeling wallpaper. The quality of primer will help identify a specialist, in addition, its cost is quite a reliable.
Another important condition for the high-quality winticulum of wall-paper walls is the provision of microclimate in the room: the air temperature should not be lower than +12 C, and the level of humidity should be withstanding at a mark of 50%, not higher. If the microclimate of the room will differ from the recommended, then the surface of the walls will dry out much longer or, on the contrary, very quickly, forming a crack on the canvases.
In order to label the photo wallpaper, such tools should be prepared:
- stationery knife;
- Ruler and pencil;
- brush and hard roller;
- Spatula with rounded edge;
- Sponge and small cut soft fabric.
Next, it is necessary to prepare for the sticker themselves the photo wallpaper.
Rolls are removed from the packaging and, if required, cut into three parts. Be sure to make sure that the integrity and monotony of the image are preserved.
Wall mural on paper basis can be poured in three ways. The first method involves applying adhesive masses on the wrong side of the canvas, which are dispersed on the floor down. After that, the roll is slightly wounded and left for swelling for 3 minutes.
Article on the topic: The jacket on one shoulder crochet or knitting with photos and video
In this case, it is important not to overdo it with glue, it should be in sufficient quantity, but not in escort.
Excess adhesive weight should not be in places of joints when sticking to the wall. For the strength of the junction of the edges of the edge of the canvases should be well lubricated by glue.
The second way of stickers of paper photos of wallpaper implies the initial wetting with warm water with a softwood. And when the paper absorbs moisture, it is lubricated with glue and start assembling on the wall.
The third way to glue photo wallpaper on the walls can be used if there are inscription "Prepaasted", which indicates that they are already treated with an adhesive solution.
Such photo wallpaper is only necessary to moisten, immersing in warm water for 30 seconds. Then they are taken out, they shake off the surplus of moisture and still leave for 2 minutes, after which they need to be glued to the wall or other surface. Be sure to additionally fix the joints of the canvas with an elastic roller or spatula.
How to glue photo wallpapers on a self-adhesive basis? This type of wallpaper is characterized by significant advantages relative to other species. The installation technology of such wallpapers does not imply the use of glue or water, because their base has already has an adhesive layer. A certain microclimate for photo wallpaper on a self-taking basis is also no need to withstand.
From the inside of the canvas, it is necessary to remove a special paper coating first for a short distance, about 4 cm, and fix on an ideally smooth surface. Then, gradually taking off the paper layer, fit the wall to the wall. In this case, you need to immediately select accurate guidelines so that as a result, do not get a curve image on the surface.
After that, the wallpaper is carefully smoothed and air bubbles are squeezed out of them. If such wallpapers are planned to be pasted into the corner of the room, they are trimmed at an angle of 45 degrees and heated by a typical hairdryer along the edges of the canvases.
Article on the topic: Jumper Crochet: Schemes and descriptions of knitting youth, male and female model
Recommendations
Whatever technology gluing photographic was used, initially need to determine their correct placement on the surface. To do this, the selected image should be decomposed on the floor, navigate with the size of the wall and make marking on it using a ruler and pencil.
For loyalty on the wall, the vertical line is carried out, which will later serve as the starting point.
The canvases are stuck on the wall in a certain order, carefully smoothing on the wall, avoiding excess glue and air bubbles. Great help in smoothing photo wallpapers will be rubber roller, which should be produced in the shape of a Christmas tree from the center of the canvas to the edges.
If suddenly, the glue was made on the wallpaper, he was cleaned immediately soft rag. After salaling, the photo wallpapers are given to dry, not allowing indoors of drafts.
If you need to remove the surplus of the canvas, you can use a sharp stationery knife and a wide spatula.