It will learn to sew a beautiful curtains with your own hands, for sure, every hostess dreams. And if you make an even option is not difficult, then decoration requires learning how to make patterns of lambrequins or use it ready.
Where to begin
Before proceeding with sewing, you should definitely understand which curtains are needed in the room whether they will be functional or just carry a decorative function, such as curtain swing. It is important to definitely understand the necessary degree of closing the window opening, how to make patterns and sew all parts of the future composition.
You can now choose various options for lambrequin and classic curtains. It is important to remember that a model with cascade, glazoid, uniformly distributed folds look carefully.
Volumetric options are better obtained from heavy dense tissues. Stylishly look like lambrequins decorated with challenges, frills, border. The main thing that everything was in moderation.
The next stage will be the window opening and calculation of the size of the curtains. This should take into account some important points:
- Usually, the minimum sizes of the curtain corresponds to the length of the eaves, but to ensure reliable protection against sunlight should be added to the value obtained somewhere 20 cm;
- To decorate the curtains in a fold to the length of the eaves, it should be added at least a third of the length;
- The choice of long curtains depends on the style, personal preferences and style. The canvas can fall to the floor or be short, for example, on 1/3 of the window. Important. Choosing a shortened option, you should pay attention to the height of the upper simpleness - for the aesthetic type of curtains should be completely closed.
Crya subtlety
Assembly to sew the curtains with your own hands, you should master remember that simple patterns (rectangular curtains) can be built directly on the fabric using a ruler and chalk. But with a small experience and more complex options, it is better not to be lazy and build a pre-pattern on paper, and then transfer to the fabric. In addition, it is important not to forget to leave points on the seams:- For side and upper edges, they make up about 2 cm;
- For the bottom - 10 cm.
Article on the topic: The thickness of the interior door canvas
With the pattern of the lambrequin, things are a little more difficult. Council. Circling this type of decorative elements is better at 45 degrees. It will simplify drapery, will ensure the formation of more even and soft folds.
Fabric calculation on lambrequin
The flow consumption on the sewing of the lambrequin depends not only on the length of the window eaves, but also from the planned number of swallows, the presence of ties and other elements. For a single symmetric Swag, the metrah directly depends on the magnitude of the window opening (cornice length). In the case of several overlapping elements, it should be borne in mind that more aesthetically looks like the overlap of fabric waves per 1/3 width. Consequently, the flow will increase by overlapping. For example, when we sewing with your own hands, a lambrequin consisting of two overlapping elements is necessary to split the cornice length to 5 and the resulting value is multiplied by 3. This will be the necessary width of one element.
Pattern of the original Swag.
To paint the Swag with your own hands better on the vertical surface using a special cradle cord. To do this, you must perform the following steps:- In the upper part of the pattern, postpone the calculated width of the width (points 1 and 2) and outline the central point 3 (outstand);
- Distance 1-2 divided into 3 equal parts, in these places put points 5 and 6;
- From the center to postpone the necessary height of the Swag H (point 4 is obtained);
- Connect a neat, smooth semicircle point 1-2-4. Council. It is easier to do this with the help of a rope.
- Emboss the bottom circle. The value of the height 4-4a may be 50-80% of the width of the product and depends on the intended puff of the Swag;
- From point 4a to postpone the arc segment 1-4 and designate the obtained points 1a and 2a;
- connect points 5 and 6, respectively, with 1a and 2a - this is the line assembly line;
- At points 5 and 6 angles gently round. Important. When I exhibit the Swag, there should be allowances for seams 2 cm.
Article on the topic: Create a brick wall imitation with your own hands
Pattern of single lambrequin "Scarf"
Open-circular lambrequen "Scarf" is a processed cloth that is draped, manually laid directly on the cornice. It is perfectly combined with classic curtains and will become an interesting window decoration in almost any room. Important. The height of the waga in a similar product should be not more than 1/6 of the part of the window opening.
The model is quite simple, and you can absorb the lambrene immediately on the fabric. To do this, you need to step by step following the following steps:
- Determine the length of the eaves and the required height of provisions. Council. In order to visually present the future product, you can hang the lace to the cornice and measure the required height and the length of provisions (on the arc to the place of attachment).
- From above, the web should be celebrated the middle of the future product and to postpone from it on both sides of 1/2 width of the cornice and the height of Foldda. Down to postpone the depth of proviscial coefficient 2 on the assembly (i.e. double height of provisions).
- From the bottom to postpone from the center at half the length of proviscial (arcs). By connecting these marks with the marks of the eaves width, we get a line for sewing a curtain braid.
- Seafood and gently pull the fabric. Council. The place of the tie can be consequely to decorate with small decorative elements (flowers, bows, etc.).
Pattern of curtains and lambrequin
The combination of curtains and lambrequins looks stylish, presentable and original, while this option is quite functional. Depending on the selected style and color solutions, you can decorate the living room, office, children's room or any other room.
We offer the pattern of a lambrequin consisting of two swolsters and side cascades, and classic curtains. To sew such a set with your own hands at a height of 2.6 m and the length of the eaves - 90 cm, you will need two rectangular cuts of the tissue, the dimensions of which are shown in the figure. Important: All sizes are already taking into account the allowance.
Article Artificial Flowers in the Interior
You should make patterns of all items and then you can sew. Buildings do not require special knowledge and skills and can be carried out directly on the fabric.
Pattern of classic curtains with simple lambrene
Double curtains with simple lambrequins are perfectly suitable for windows living room or bedroom. Thanks to the stylish mind, they transform space. At the same time, the rear curtains close and become excellent protection against light or curious eyes.
Important
Lambreken consists of two different parts. They should be chicted from the same fabric as curtains. So the composition will look harmonious.
Curtains with lambrequins are able to make a note of sophistication and be unrecognizable to transform any space, and to sew them, with some skill and diligence, is not so difficult. The main thing to have a desire and make efforts.