In the country areas for business buildings you need doors. You can order them or try to make it yourself. What is needed for this? Material and skill skills tool. Below will be described how to make the door from the lining with your own hands. It can be installed, for example, in the chicken coop or at the entrance to the cellar. You can make this design and install it in place within two or three days.
For decoration, the door with wooden lining will need finish nails with low-wedge caps.
Start of work
To clarify the desired amount of material at first it is necessary to determine the size of the future door. For this measure the opening where it should be installed. This is done with a roulette or metal line. Usually the height of standard structures is equal to two meters with a width of up to 90 cm.
Lining scheme.
But to reduce heat losses, you can move away from these numbers and make a design with dimensions, for example, 180 x 80 cm. It all depends on the value of the opening. Maybe you need to make a small window in the door to look into the room outside.
There are no such structures in construction stores, so you have to do them yourself. If the frame in the opening is in a normal state, then it can be used for the door suspension. If not, it will be necessary to install it. This will require a timing of 100 x 100 mm, building nails and a hammer. After installing the door frame, you will need to take the size of the received opening and make the door on them.
Material selection for design
After determining the sizes of the future door, it comes to think through what material it is better to do it. For such structures, wood is most often used. You can collect it from the boards with a thickness of up to 30 mm, but their weight will be quite large.
Article on the topic: How to strip curtains with a tape: instructions for beginners
Variants of drawings when finishing with lining doors.
Apply plywood sheets - but then the price of the material increases. And still you will need boards to create a frame. To combine low weight and acceptable financial costs need to be added as follows:
- The main frame must be made of the boards of 100 x 30 mm of the desired length;
- The central part will be typed from the lining.
This hybrid version meets all the necessary requirements. The material is bought in the construction market. There you must also purchase a loop for installing doors, varnish or paint, nails, handles. Choose well-dried pine boards. It is desirable that Teres be processed by Olife and was smooth on one side.
Technology for creating doors of lining
Let the sizes of the design be 180 x 80 cm. Previously before starting work, it is necessary to add all the necessary materials and the tools in one place to not search for them. As a workbench, you can use an ordinary shop.
In order for the cabinet door on the balcony was not heavy, it is necessary to use the most thin lining.
Make a design in such a sequence:
- Hand saw or electric jigsaw cut 2 boards per size 180 cm;
- They make the end milling cut into the cartridge of the electric drill, the grooves from the end side, a depth of 40-50 mm and 10 mm width, it will be vertical parts of the door;
- Cropped with a saw of 3 boards with a length of 68-70 cm;
- retreating from their edges of 4-5 cm, sharpening a tree to a depth of 10 mm from above and below;
- One of the boards is inserted into the grooves of vertical parts and secured with nails, the design in the form of the letter "P" should be obtained;
- The lining is cut on a length of 68-70 cm, the number of boards is calculated as follows: 180 - 20 = 160 cm; With the height of the folder of the clap in 4 cm, it will take 40 pieces (160/4), and with thicker boards less;
- The obtained planks are inserted into the grooves of vertical parts of the door and fasten with nails, and then one of the short pine boards complete the preliminary assembly, inserting it into the remaining gap, the robust design should be obtained;
- In the middle part of the resulting door, feed the last (short) pine board for the screed in the middle part;
- Attach the handles, if necessary, you can insert a small lock, install the loops and hang the door on the frame in the opening.
Article on the topic: Facade cassettes are simple and tasteful
You can, instead of the lining in the groove insert a plywood shield with suitable sizes and then tinker it, but this is a matter of taste.
After the manufacturer, the product is ground and after drying this layer is covered with varnish or paint.
Used materials and tools
- Pine boards.
- Lining 1 cm thick.
- Nails.
- Loops and door knobs.
- True for wood.
- Varnish or paint.
- Saw or electric jigsaw.
- Drill with an end milling cutter with a diameter of 10 mm and a long working part of 5 cm.
- A hammer.
- Roulette.
- Metal ruler.
- Pencil.
In order to make the door with your own hands using the lining, you do not need any special skills and knowledge. For this, it is enough to own a little tool. You can, of course, and order a new door on your size, but it will cost much more than the independent manufacture of such a design.