A film with a sticky layer, which can be pasted with its own forces, is an ideal option for the decor of the room. Of course, for high-quality sticking of self-keys, you need to comply with some rules, but the procedure is quite simple.
It is worth noting that this type of decor is distinguished by undoubted advantages:
- resistance to the effect of moisture or melting;
- a wide variety of shades and drawings;
- ease of sticking and care;
- affordable price.
Types of self-adhesive film
Modern stores present a lot of different types of self-adhesive film, which is capable of decorating any home. Several classifications display types of self-adhesive film.
Depending on the material from which it is created:
By surface structure:
- having one layer;
- Having two layers characterized by high density indicators.
From the type of surface:
- Glossy, ideally will look in dark rooms;
- Matte, it will be good to shade light into the dwelling;
- Mirror, will become an excellent choice in a room with a small area;
- transparent, applied to decorate glass;
- Holographic, capable of becoming a real decoration of any surface.
Depending on the versions:
- Standard view (tapestry, tile, fabric, children's topics, etc.);
- Special view (metallic, velor, plug, etc.).
How to attach a refrigerator self-adhesive film
The refrigerator has in every home, and its daily use does not best affect the appearance. Claimer of the refrigerator The self-adhesive film allows you to largely update the interior and give the highlight of the whole kitchen.
Blind the self-adhesive film on the fridge is needed in several stages:
Prepare the surface of the refrigerator:
Now you can proceed to the salary:
Separately, it should be noted that the film applying to the wet method is based on the same technology, it is additionally necessary to drive out from under it not only air, but also a soap solution. In principle, sticking a self-adhesive film is not too difficult, it is important to observe accuracy and not rush, carefully smoothing all the surfaces. In conclusion, you need to hang back the doors and fittings.
Article on the topic: Knitted skirts: Schemes for beginners, how to tie clothes for a woman with a detailed description
Self-adhesive film can be decorated with any furniture.
How to glue a self-adhesive film on the door
Schematically, you can divide the entire process of plating the door by self-adhesive film into several stages:
- It is necessary to attract the prepared coating, so it is important to remove accessories from the door surface, and if it is decorated with glass, you need to remove the strokes and take it carefully.
- Now you can walk on the door of emery paper to align it.
- If the paint begins to "shame", it makes sense to remove it with a spatula.
- Small cracks detected in the processing process should be processed using a putty.
- Casting the door assumes the presence of an absolutely smooth surface, so you need to strive to achieve it.
- For degreasing, you need to grasp the coating with soap solution and remove it, not flushing, dry matter.
- When the coating on the door will die, it can be treated with acrylic-based soil.
Direct salary will occur as follows:
- It is necessary to glue the film only after measuring dimensions, with leaving reserves of 3-4 cm;
- Now you need to cut the film in size;
- Boot from the top, and separate the adhesive base more than 10 centimeters is immediately recommended;
- That part of the film that is pasted, you need to thoroughly smooth out a spatula or piece of matter so that the self-adhesive film does not gain air bubbles;
- be sure to turn the edges to the door ends;
How to attach a self-adhesive wardrobe
There are often cases when a film that has an adhesive layer is applied to the doors and cabinets panels. Thus, you can change the appearance of the wardrobe, giving it novelty and freshness. The furniture planted with such a coating looks very modern, invariably attracting surprised guest glances.
Before you take a wardrobe with a film, it is worth considering that the surface is perfectly smooth, then the canvas will be fine and will not cut ahead of time. First you need to thoroughly clean the surface of the cabinet, then degrease it with the help of a soap solution. All pens unscrew and postpone aside.
Article on the topic: How to decorate a knitted cap with your own hands with fur and rhinestones with a photo
It is necessary to glue a self-adhesive film on the furniture only after a thorough measurement of the elements and the cutting of the canvas. As a rule, a well-selected size allows you to avoid an unnecessary amount of joints. Do not forget about the mandatory leaving of the canvas centimeter from each side to the bending.
In order to accumulate a wardrobe or other furniture with self-adhesive film, adhere to such recommendations:
- A small design is better to hinder the dry method, and large - wet;
- Self-adhesive canvases need to be applied from top to bottom, if there are removable doors on the closet, remove them and salary separately;
- The glued film must be pressed to the surface of the furniture of the furniture, spoiling no more than a centimeter, so you can safely remove the air and smooth out the irregularities;
- Door pasting is carried out by the same principle as the main part of the cabinet;
- If the folds arose and are not manually deleted, you can heat this place with a hairdryer and straighten the irregularities;
- Air bubbles that could not be removed, you can pierce with a needle;
- After drying the glued canvase, you can fasten the accessories and hang the doors if they were filmed, in place.
How to remove the self-adhesive film
To remove a self-adhesive film without a trace, it is necessary to heat it, then the glue will become softer and easily clean. Film heating can be made in several ways: hot water, hairdryer or fan with heating function. Remove the film by adhering to the following recommendations:
It is necessary to remove the remnants of glue from the surface, so as not to damage the surface even more.
Summing up, it is worth noting that the self-adhesive film can be placed on any smooth surface that you want to transform. In order for its application to be accomplished, it is necessary to observe unevenness and accuracy, carefully smoothing all the irregularities. Only in this case the applied coating will delight the eyes and bring pleasure.
Article on the topic: 12 ways to get rid of midges in flower pots