The footage in the apartments are different, but the invariable item for each is the hanger. Even in the interiors of large vehicles equipped with wardrobes for outerwear, it is necessary to have a wall hanger in case of bad weather or a large number of guests. Wall-mounted hanger is used at a certain time of the year, and in the summer, empty faceless hooks - not very aesthetic spectacle. Wall hanger in the hallway with your own hands - a simple job with pleasure from the result!
The design of the wall hanger is not difficult, make it with their own hands the case of one day. Of course, it all depends on the selected model.
Simple in the manufacture of wall hanger
Wall hanger in the hallway should be reliable, beautiful, easy. Most walls in apartments are not carriers, so the high weight of the hangers can lead to the damage to the wall. It depends on the fact that the walls of the drywall cannot withstand a large load. The fallout of the dowels and the drop in the hanger depends in most part from the state of the walls and the quality of fixing fixtures, and not from the fact that the hanger is made with their own hands.
The most suitable base for the hanger will serve a well-processed board. You can use the segment of the wallboard, and if you need to make a wide hanger, then in a construction store you can see among non-standard materials. The main thing is that it was not taking the wood, due to the fact that it is very fragile, and when screwing into it, self-tapping, can split. It is undesirable to use oak, ash and other heavy wood species.
For the manufacture of the simplest hangers, you will need:
- Lobzik or hacksaw;
- blowtorch;
- sandpaper;
- screwdriver;
- awl;
- cut board;
- Hooks.
Work plan
Deciding with a long hanger, you need to cut off the board of the appropriate size. Using the wagon board, you can make the width of the hanger equal to 2 or 3 boards in width. Docked with each other segments of the board (if the hanger should not fill the opening between the objects of the cabinet furniture or walls) with the help of the jigsaw, it is possible to give it rounded, wave-like lines to its edges, or simply make it in the form of a rhombus or a trapezium like a soul.
More elegantly looks like the basis, modified with their own hands, if with the edges of the top at the angle to remove the face.
After conducting preparatory work, the edges are sandwiched and polished. The surface is smooth, now it is necessary to give the workpiece more interesting view. Boards need to be burned with a soldering lamp. With its absence, the boards can be burned over the gas burner. The option is not very good in terms of hand safety, and it's not very clear what a blackboard gets. Here the main thing is not to arrange a fire and do not pour the workpiece.
Article on the topic: How to make an original empty for home
There are 2 types of mounting to the wall:
- Hinged. This species suggests that from the reverse side of the workpiece you need to attach the "ears" - tin or made of thin metal, the planks, rounded from above. They drill holes for fastening hangers with long screws in a dowel. The longer a dowel with a screw, the more reliable the hanger will hold.
- Directly to the wall, the hanger can be fixed, drumped holes in the board through. The number of holes depends on the length and width of the base, as well as the alleged load. This method is more reliable.
It remains to distribute hooks on the surface of the board. It is necessary to fix them in one row with a period of 15 cm. On a wide board can be 2 rows of hooks. In this case, placing them better in a checker order. Interfolder distance can be enlarged.
Choosing a Chojkov
The most beneficial to a wooden burned surface to use metal hooks of brown or under the aged, in some places reaching black, copper.
The hanger will be pacifier if you use triple hooks, with one long, horn up the horizon and two short. Such hooks tend to have an attractive view of the decor of the stand and the top horn.
Brilliant gold hooks have a smooth surface, but they also look good in conjunction with a tree. The feature of hooks is that they are attached to 3 holes with self-draws to the board. This mount will not allow the hook to rotate around the self-press. Making 2 rows of hooks, it is better to choose different in size, but the same style and color of the product. Smaller better fasten down at the bottom, and large above the hangers.
High hanger in the hallway
In the absence of space for a wardrobe in the hallway. It will take more space, especially during the offseason, for the placement of outerwear in the hallway. Here on the help of the hostess will come a high wall hanger in 170-180 cm high. Its width should be at least a meter. Make it with your own hands, even a teenager. The only minus it is in the high cost of lining.
You can take under the exterior design of platbands for interior doors. This material is cheaper, it looks very attractive, a large selection of colors.
The disadvantage is that for gravity it is not intended. So that the hanger was not only an ornament, but also the functional subject of the interior, it is necessary for transverse crossbars that are behind the decorative boards, use durable extruded material or bars of natural wood.
Article on the topic: A very convenient folding table - independent manufacture
For hangers, you will need 6-7 platbands. They will be attached to transverse jumpers, self-drawing, which hold hooks. You can mount the vertical elements parallel to each other, and you can allow the extension of the hanger at the top. In this case, it is necessary to designate the center of the shelves under the hooks, and start mounting from the central board. After that, it is necessary to fix the elements pairly on both sides of it. To facilitate installation, you can first fasten the transverse items on the wall, and then produce the mounting of the vertical elements.
It is the board, and not the upper decorative layer will hold hooks with overhead clothing. The more rows with hooks, the greater the external facade of the natural tree.
Elk Horn hanger
Hiking in the forest on mushrooms and berries can bring unexpected finds, such as mowing horns. More beautiful, durable and durable hanger and come up with it.
To make it take it with your own hands:
- Nadfil;
- sandpaper;
- varnish;
- brush;
- self-tapping screw;
- screwdriver;
- drill.
Find horns - It is only half of the case. A still worthy of this material is the basis. The most interesting will look 5 cm round spice of a tree trunk with a bark. And you can use the sleeve done at an angle of 45 ° or 60 ⁰. For the base, a well-dried tree is needed, and with their own hands from the middle diameter of the trunk, you can make a worthy base under the hanger, increasing the angle of sleep.
Beautiful drawing and shade of wood have garden trees - pears, apple trees. Of these, in combination with deer or enean horns, a wonderful wall hanger will get, it is easy to make it yourself.
Having hung it to the hallway, you can get not just a wonderful decoration, but also save space due to the fact that it is located, as a rule, above other items of this purpose.
If necessary, eliminate the old tree, to let its barrel on the crossing is irrational. Dies, dried out of his barrel and thick branches, are suitable for making their own arranging interior and garden tracks. When using this wood in the house, a pleasant fragrance allocated even a small piece of wood will fill the room.
Treatment of horns
The horns who have lain in the rain and the sun are darker, covered with moss. They need to be cleaned. Nadfil is better to use for a part that flew earlier to the head of the forest handsome man. This part of the textured, to process it is better in the direction along the corrugated elements. The rest of the surface can be cleaned by sandpaper. If the horns did not have to winter in the forest separately from its owner, then they did not darkens much, and after stripping will have a color of ocher. Further, they need to be covered with a thick layer of varnish, to give them shine. Apply the lacquer is better in 3 layers, which will increase the timing of the hanger with their own hands.
Article on the topic: Shelves do it yourself for home and family (+44 photos)
Production of hanger
Processed - The separated cut of wood should also be covered with varnish. You can use varnish with a kel, which will give the wood saturated color. Thin drill at the base of the horns are made 3 holes. The same in diameter through holes are dried in the wood. Their location should be identical, made of deepening at the base of the horns. Thanks to such holes, it will be easier to fix the horn to the heart.
The most profitable when working, with a whole wooden plate, take screws 80 or 100 mm. If a hole is chosen for the bottom of the horns in a shock, about half of its thickness, then the screw can be shorter.
If a quiet hunt brought a very heavy trophy, it is possible to mount the horns to the wood using a dowel. Carnat the shoe to the wall can be directly, it is possible using overhead metal plates.
Video Gallery
Photo Gallery
