When a lot of light goes into the room, it is fine, but sometimes it becomes too much, it prevents working or relax. Correct the situation will help the attachment of the blinds that are vertical, horizontal, rolled. They can be mounted independently or resort to help professionals.
Installation of products is made to the wall, ceiling or directly in the opening. By purchasing blinds, you need to remember some rules.
- First of all, you need to determine the exact parameters of the window - width and height.
- Decide where the control system will be located.
- Find out the optimal type of fasteners for blinds.
Vertical models are usually attached above the window opening, can perform the Gardin feature. Horizontal and rolled have more opportunities - they are mounted on the upper slope, on the window, for each sash separately. At the same time, they are perfectly combined with any curtains, leave free windowsill. Each itself must determine the appropriate product and installation options.
Council
Blinds are best booking in the same company that was engaged in the manufacture of windows.
The standard set of products usually includes a detailed instruction, telling how to make installation yourself.
Methods of installation
Fastening the blinds to plastic windows directly depends on the design and functional purpose. Horizontal or rolled products, closing only glass, are attached directly to the frame. In this case, they can function simultaneously or independently of each other. To install vertical blinds on the ceiling, you must attach the bracket.
The opening sash does not require drilling, as the brackets can be installed using special clamps or bilateral tape. The most reliable and durable installation method is screws that screw up with a screwdriver. Be sure to take into account that the walls in many rooms are uneven, therefore the determination of the method of installing fasteners for the blinds is one of the main factors for the successful process.
Article on the topic: Wallpapers and decorative panels: Finishing and combination in the interior
For high-quality installation, you need brackets or brackets that are usually included, as well as tools: cross screwdriver, hammer, drill or perforator, construction plumb, drill, roulette.
Installation of blinds on the brackets is performed according to a specific algorithm.
- Make marking on the estimated place of installation.
- Move the mount for the blinds in a specific place: to the ceiling, sash, wall.
- Rotate the latch of the mechanism until it stops counterclockwise, insert the cornice, return the latches to its original position.
Installation of blinds on non-standard openings using drilling occurs otherwise.
- At the top of the frame installed brackets, at the bottom - plastic corners.
- In special sleeves of the upper cornice, it is necessary to fix cables.
- Secure cornice on brackets.
- Through the holes of the lamellas skip the cable.
- You need another pair of sleeves into the holes of the lower brackets, to turn the cable through them and fix it.
- Secure the handle on the design.
- Check system performance.
Installing fasteners for blinds on inclined windows with screws is carried out in a similar way using drilling.
How to determine the size of the blinds?
By installing blinds on large openings, it is necessary to use intermediate elements, which will significantly increase the reliability of the structure. One bracket must be accommodated next to the control mechanism, since this site is more susceptible to the load. However, it must be borne in mind that it should not interfere with the normal functioning of the system.
The width of the blinds of the blinds, installed on the sash and opening with them, must correspond to the Plus Plus parameters - one and a half on each side. Installation inside the opening implies a cloth for four centimeters less than the width of the window - two centimeters on each side. For free functioning between the web and the upper edge of the opening, a gap is required.
Installation outside the window opening requires the use of a web, which is more than ten centimeters width - five on each side. Length is no less than the height of the window plus ten centimeters. If the window handle performs, blinds are attached to the brackets. The cloth at the same time should be 20 centimeters exceeding the width of the opening, which will allow more effectively to darken the room.
Council
Before installing fasteners for blinds it is necessary to check whether the selected design will prevent the normal functioning of the sash.
Vertical models are mainly attached to the ceiling. They consist of a cornice with a control mechanism and lamellas from different materials: plastic, fabric, wood. After mounting the eaves, it is necessary to attach lamellas, and it is necessary to monitor the seams on the plates with closed blinds inside. After installing all the bands, it is necessary to attach the cord, driven by the control mechanism, and so that it is not confused, it is put on a special plumb that is included in the kit - it can be any form.
Article on the topic: Device seams: regulatory documentation, stages of work
Lamels are easily cut, so in case of errors, the position can be easily corrected using simple tools. Modern manufacturers do everything possible to reduce the complexity of the process. The main thing is to hang stripes correctly, since all windows have different parameters.
Scheme of horizontal blinds in the context
How to choose?
Due to the simplicity of the design, the blinds are made very quickly, and many ways of fastening - using or without drilling - it allows you to install them on the windows with both swivel and folding mode of operation. Now it is not necessary to drill the frame at all, and in the case of dismantling there will be no unattractive holes.
Modern manufacturers offer completely new installation methods:
- Holding magnets that allow the canvas parallel to the leaf;
- double sided tape;
- Brackets or clamps that are attached to the sash.
Council
Before installing the blinds it is necessary to check the tightness of the window, trace so that there are no drafts that will rock the design and impede functioning.
Method of installation depends on the design and size of the product. Choosing a model, be sure to take into account the functional purpose of the room. During operation, it is necessary to observe maximum accuracy and caution, as well as determine for yourself the most suitable product, the method of its installation and operation. It is important to remember that all the blinds have strict geometric shapes, so even a small skew when installing will spoil the appearance and make it difficult to work the control mechanism.
Today, blinds are one of the most effective elements for decorating the indoor space. They gracefully regulate the flow of sunlight, and ease of operation, the available cost, the variety of models and materials used for production, allow them to remain relevant for more than one decade.
Another factor influencing popularity is light care, which consists in periodically wiping the lamellae with a sponge dipped in a soap solution. Once a year, the strips should be removed, turn each into a roll and put into the water with a detergent - the dirt will come down without any additional actions. After rinsing, their wet hang in place where they will disappear on their own. Separate types of blinds can be subjected to dry cleaning with a vacuum cleaner.
Article on the topic: Connecting a washing machine to water supply and sewage with your own hands
A huge range of products of various configurations and sizes allows you to choose the appropriate option in each case. It is possible to install products yourself, however, restrictions on warranty service appear. A more reliable option is to contact the specialists, it will help to avoid many difficulties.