Table of contents: [Hide]
- How to make a bed attic with their own hands
- How to make a base and stairs
- Making supplements
Not always in the apartment you can highlight a fairly large area for the children's room.
Children's bed attic can save space in the children's room.
If the child's room has a small area, then you can save the place due to the installation of a baby's children's bed.
At the same time, on Square in 2 m2, you can place a bed attic, a place for games, a table for classes, as well as a wardrobe with shelves. The design of such a model is similar to a two-tier children's bed. But it is intended for one child. You can assemble a baby bed for children alone.
How to make a bed attic with their own hands
Materials and tools:
- Bar with cross section 40x50 mm 16.6 m long;
- Bar with cross section 22x22, 4.5 m long;
- Board pine thick 20 mm thick, 2.1 m long;
- Board pine thickness 30, 33 m long;
- Bar bucked thickness 30, 1.8 m long;
- varnish;
- glue joiner;
- screws;
- screwdriver;
- nails;
- a hammer;
- beech wedges;
- painting brush;
- roulette;
- Sucks;
- drill;
- hacksaw;
- Sander.
Previously need to perform billets from wood.
Size diagram of the bed of the attic.
4 details of 30x85x660 mm for legs of the product are cut out of pine boards. After that, 3 longitudinal beams with dimensions of 30x85x1940 are manufactured. Then cut the transverse beams 4 pieces with dimensions of 30x85x660.
Then they drink the beam of the fence with dimensions of 30x85x1520. Then - fence racks 11 pieces with dimensions of 20x85x185.
For the base of the design, 4 racks 30x85x1140, 6 transverse beams 30x85x660 and 3 longitudinal beams 30x85x1920 are cut.
For the stairs, beech crossbars of 3 pieces of 30x40x450 and a pine tutor 2 pieces of 30x85x1180 are cut down.
Article on the topic: Children's for the daughter of Elena Sparrow
Start the manufacture of products from a bed. The height of the bed can be changed in accordance with the age of the child. The first level is the lowest, intended for a small child. The second level is older for a child, height is equal to a regular bed. The third level is a bed attic. From scratch, under the attic you can position the table for classes.
The design consists of a bed, bases and stairs.
The bed will consist of connecting boards on the principle of groove-spike. Details that do not understand - the base, backs, fence - will be glued.
Collapsible blanks are fixed with beech wedges.
For mounting holes designed for fasteners, you can use stencil from cardboard.
Cut off blanks for the back. Then grind them.
Connect the details together. After clarifying all the sizes, the details glue.
Collect construction nodes.
First collect lower crossbars and racks. They are glued together. Then additionally screw them with screws.
After that, the glued products are tightly tighten with ropes for better strength. In this form, the parts are left before drying the glue.
Bed assembly diagram attic: 1-bolt M6 110 mm; 2-Evrovint; 3-nut M6.
Produce the legs of the product. For this purpose, a bar is installed in the holes of the racks. Then in the grooves of the legs set the spikes of transverse elements. Pre-handle the holes with glue.
After that, the lining is glued to the transverse board.
Then 5 mm is retreating from the bottom and the support bars glue with longitudinal beams. After that, add parts with screws.
The side walls are collected according to the same rules as the backs.
The lattice base is made of 2 longitudinal and 11 transverse beams. All elements glue. Then they fasten them with screws for strength.
After drying the glue, finish performs. First, all parts are grinding. Then two times cover the design of the lacquer.
Article on the topic: Outdoor hatches for the basement: how to make it yourself
The assembled parts are connected to the frame. To this end, the spikes of longitudinal beams are inserted into the grooves of bed legs. Buck wedges are used for fastening.
Perform a fence of the product. For this, the beam of the fence is connected with the racks on the same principle. Details glued and strengthen screws.
Back to the category
How to make a base and stairs
Ladder manufacturing scheme for the attic bed.
The base is performed from two transverse frames. They are connected to each other longitudinal crossbars and one additional rack.
Side elements are assembled according to the principle of spike-grooves similarly how the elements of the back are collected.
First, at a height of 315, 600 and 980 mm, it is established cross.
Connect longitudinal details with transverse.
After assembling the base, it is necessary in the upper ends of the racks to drill holes with a diameter of 10 mm. They must have a length of 15 mm. These holes glue the dysfunction of 10x30 mm.
For the manufacture of the stairs on the inner parts of each rack make the grooves with a depth of 42 mm and a diameter of 30 mm. In the grooves glue crossbars from beech.
To install a sleeping place to the top tier, you need to fix the frame on the base racks. To do this, the upper bases of the base are installed in the grooves that are in the shoe legs.
Then you need to separate the longitudinal beam from the back and fix an additional base rack on it.
After that, the beam on the back is mounted.
Mounted the staircase in its place and fix it with supporting elements.
Next to the supporting beam glued the lining and fasten with screws.
After that, the lattice base is mounted in its place.
Children's bed attic ready. The entire surface of the product is grinning, and after a varnish in two layers are covered.
Back to the category
Making supplements
A framework of the table is made of pine boards. For this, the countertop with dimensions of 700x1300 mm from a wooden shield is performed. Attach it to the housing with screeds. The tables for the table are mounted separately. Then set the stands on the rollers.
Article on the topic: Houses projects Drawings
Perform the shelf for books from two horizontal and vertical elements. Glue them. Hooks screwed down to the side part of the shelves.
All the details of the attic bed, as well as the desk, grind and covered with varnish.
So you manufacture a great attic bed for a child and his own corner where he can relax, play, read books and do lessons.