One of the options for design of the window opening is the installation of the Magellan ceiling karnis. Thanks to modern design, it will look great even in the very exquisite interior. Because of its practicality, ease of installation and easy maintenance ceiling eternity curtains have become very popular. This is the perfect solution for rooms with low ceilings. They help visually increase the height of the room and look very advantageously. The unconditional advantage is the possibility of fastening the structure of both the usual and tension ceiling, as well as the ability to use the curtains of any kind.
Ceiling cornice mounting scheme.
Installation of the ceiling karnisa Magellan
Standard equipment of the cornice consists of:
- white plastic tire hollow, which has 1, 2 or 3 rows of hooks, on which curtains are attached;
- kit of fittings;
- special rounded corners, 15 cm, 15 cm, for the adjuncing of the cornice to the wall;
- PVC strips imitating various wood or white breeds intended to close the bus;
To assemble cornis yourself, you will need:
- level;
- pencil;
- roulette;
- screwdriver;
- a hammer;
- drill or perforator (depends on the ceiling material);
- hacksaw.
Before collecting and mounting the cornice, it is necessary to determine its exact dimensions taking into account the angular parts.
Constructive solution of suspended ceiling.
The length of the central tire can be reduced to the desired length, simply cutting off an extra piece with hacksaw. Also necessarily determine the position of the design in relation to the window. The cornice should not interfere with freely open it, and the curtains should not cling to the handle, protruding the windowsill or battery. Carefully performed measurements will be a guarantee of high-quality installation of the cornice, which ensures not only its reliable mounting to the ceiling, but also convenience during operation.
The installation of the cornice is performed in such a sequence:
- After measuring, the position of the cornice on the ceiling is denoted by a pencil;
- By connecting the central and angular parts of the tire, apply them to the conducted line and denote the point of fastening with a pencil through the factory holes;
- The ceiling drill holes under the dowel, and the weight of the curtains should be taken into account: for single-row karnis, there is enough dowels with a diameter of 5 mm, and for two- or three-row - at least 7 mm;
- If the mount is performed to the suspended ceiling of plasterboard, ordinary dowels will not fit - you should use special fasteners for drywall;
- After the tire is screwed to the ceiling, plastic plugs are closed by mounting holes;
- With the help of special grooves, a decorative panel is attached.
Article on the topic: Franch Tea and Coffee Press
Hooks that are on curtains, come through rectangular holes in the tire. In order for the curtains not slippage, plugs are installed. Magellan ceiling karnis installation is pretty simple, but it will be difficult to perform work alone.