Blinds with their own hands from girlfriend: Tips and nuances

To make blinds with your own hands, do not necessarily have engineering skills and fantasy designer. The manifold of master classes and accessibility of fittings allow any person if desired to turn into a decorator. Horizontal, rolled and vertical designs can be a functional addition of the window decor or completely replace the usual curtains. Today, the simplest systems from paper, complex fabric ensembles and practical plastic products are especially popular. Selecting the optimal option, it is worth remembering the harmonious combination of the image with the rest of the decor. For example, the cheapest paper light filter for the window will look extremely inappropriate in a chic living room furnished with high-quality and expensive furniture.

How to make original horizontal blinds with your own hands?

The easiest and most affordable blind option is the sunscreen systems of the horizontal type. To create them, it will take a cut of wallpapers (best - intended under painting), ruler, scissors, a stationery knife, a solid rope or cord, a hole panel (mold), a retainer, a decorative plug and double-sided tape.

To make the blinds with your own hands, you need to perform the following steps.

• Conduct all the necessary measurements and cut off a piece of wallpaper of the desired size. It is worth considering that with the most common variant of the web, the harmonica is formed, so it is necessary to add about 30 cm to the cut length. The model width should be equal to the windows width.
• From the canvas make harmonica. The product will look careful if you pre-apply on the wrong side of the curtains of the mark. The folds should not be done too small, the recommended width of the planks from 3 to 6 cm.
• Next is formed by the harmonica, while the bottom plank must be in the form of a complete stage, and the upper one is perfectly approached by the width of the sash to which it will be attached.
• The harmonica folds into a single line, the hole is done in the center with a hole punch. It may have a shape of a heart, an asterisk or a simple circle. A similar solution will look on the surface of the window more interesting than solid horizontal curtains.
• Through the hole, the cord is used, which is fixed on the top of the product using the node and is stuck with bilateral scotch.
• Curtains need to be reappeared to understand how long the rope is required. The end result must be added a few centimeters.
• The lower edges glue between themselves, while you need to straighten them and form a beautiful "peacock tail." A lock is fixed on the cord, with which the canvas control will be controlled, and the plug.
• When the product is ready, it is fixed to the sash using double-sided tape. It is worth considering that such an attachment is enough for plastic frames. Even paper blinds will have to be additionally fixed to wooden sash.

Council

This method is the optimal option for which horizontal blinds are manufactured. If the bottom does not glue in the form of a semicircle, the edges of the product will constantly outweigh each other, giving the models an inesttic appearance. Additional inconvenience - such models when lifting have to be additionally fixed with clothespins.

Simple version of manufacturing vertical blinds with your own hands

Making vertical blinds at home is not easy, but maybe. To do this, you can use special plastic planks or glazed painting. In the first case, you only need to build the lamellas using special accessories and hang them on the chain. In the second work will be a little more.

• First you need to decide, the curtains will close only the area of ​​the window or not to get to the floor just a couple of centimeters. The width of the lamellae must be within 12 cm. For cutting, it is necessary to use a meter ruler or a long rail, otherwise the part of the product is obtained by curves and inaccurate.
• In the upper and lower parts of the elements received, special wide skulls are fixed. At the same time, the threaded hooks must be built in advance. Ideally, vertical rails are also welcome.
• After that, in all the upper rails in the same place, small holes are drilled through which the elements will be connected.
• The cord is done through the prepared holes, which are recommended in advance to lubricate with reliable glue. Vertical lamellas are fixed at a certain place, which will facilitate the process of operation and their movement in the window area.
• Aluminum or plastic guides are used for mounting lamella. They are attached to their special sliders, and to them, in turn, lamellas are fixed through the upper thread hooks.
• It is worth considering that it is necessary to leave at least 20-30 cm cord to form a control loop. Thanks to fixing lamellae on glue, elements will be rotated. In order for vertical blinds to move to the sides, it is necessary to additionally attach a thin rod on the hinges to the top plank.

Article on the topic: Finishing of slopes of windows Senvich panels - the final stage of installation

If you use the wallpaper for painting to create the curtains, it will be possible to give the product any color and view.

Production of fabric rolled curtains at home

If you have elementary sewing skills, you can make yourself even rolled curtains. Practical fabric cloths accompanied by decorative elements will become a real decoration of the window and allow control of the illumination of the room. Functional structures can act as an independent element or combine with classic porters or tulle.

An important point is to determine the type of fastening. When mounting the system on the wall, you can reach the full blocking of sunlight. If fixing the product on separate flaps, the window will not be violated. When choosing a material for the future curtains, you should give preference to special tissues treated with antistatic and antibacterial compositions. It will simplify the process of care for products and protect the inhabitants of the room from dust and accumulate in the air of allergens. When decorating the kitchen, you can choose polyester or matter with teflon coating. Modern manufacturers are ready to offer even fabrics with a spraying, which look rich and nothing give out the fact that homemade products.

To make rolled blinds with their own hands, the following materials will be needed:

1. Two cuts of favorite material;
2. Special tissue for the formation of garters;
3. Wooden timber with a 2.5 cm cross section;
4. Round wooden rake with a diameter of about 2 cm;
5. Big furniture stapler with paper clips;
6. Screwdriver and several screws;
7. Sewing accessories.

The workflow consists of the following steps.

• The dimensions of the sections of the fabric to create a product are determined. The width should be equal to the width of the window plus 2-2.5 cm per battery. The length is equal to the height of the window plus 8-15 cm and plus 2-2.5 cm per battery.
• Of the sections of the fabric (which can be different design) are cut two canvases. They are put on top of each other by the front parties, wunting over the sides and with another edge and stripped on a typewriter.
• The resulting bag must be turned, sew a gap and stroke the seams.
• The canvas spread the invalid side up, the timber is laid out at the top of the top (it should be 1 cm in short, than the canvas), turn the cloth and fix the trees to the tree.
• From the bottom of the canvas, neat pockets are stitching, which is sewn. This step will allow the canvas to remain smooth and stretched in the deployed form.
• From the additional fabric, the strips are cut into a double height of the window plus 30 cm and 8 cm wide. Of these, ribbons are made that will hold the entire design.
• The obtained garters turn through the top wooden plank at the same distance from the edges of the product and fixed to the tree with brackets.
• When the product is in spilled form, the garters simply hang in the form of decorative tapes. If the blinds need to be lifted, the ribbons are carried out under the bottom of the curtain, the canvas manually twisted into the roll, which is fixed with garters. Most often, the tapes are transferred through the top of the product and tie to the decorative pins in advance.

Article on the topic: London curtains do it yourself: technology tailoring, features

Output

The availability of materials for creating homemade blinds allows you to choose even a few suitable options that can be changed at will. Using additional decor elements will provide images uniqueness.

It is not difficult to care for the models, but you do not need to forget that the specifics of products lead to their rapid wear. It is worth considering that if you use similar products in household facilities, the canvas will have to be changed regularly.