Despite the fact that many people simply adore bath procedures, far from everyone know how to knit brooms for a bath. At the preservation of many modern people, such a useful structure has recently appeared as a bath, but still the necessary attributes for a high-quality bunny have to be purchased separately.
The broom is one of the most important items necessary to obtain maximum benefit from staying in the present bath.
The fact is that properly manufactured bath brooms allow not only to eliminate the flabber skin, but to carry out a lightweight, relaxing massage, which will help eliminate the muscle tension and increase the blood flow in all soft tissues of the back, as well as in the spine.
Among other things, a correctly made broom after a certain preliminary preparation can exhibit an incredible smell, creating the effect of aromatherapy.
What you need to know about brooms for a bath?
In order for brooms to bring a maximum benefit of the human body, you need to take into account many moments during their manufacture. First of all, it should be borne in mind that brooms intended for the bath should be made from branches whose thickness does not exceed 5 mm. Among other things, it is worth noting that brooms for the baths are made of branches of various types of trees and bushes, it is completely no coincidence.
The most common types of plants and trees used in the manufacture of brooms for the bath include:
- Birch;
- oak;
- eucalyptus;
- Linden;
- nettle;
- sagebrush;
- coniferous.
Each of these types of brooms is suitable for people who have certain health problems. For example, wreaths from oak branches will become an excellent solution for greens of oily skin, as they contribute to the deep purification and elimination of inflammatory processes.
Article on the topic: Folder for documents and paper with your own hands
The use of birch brooms is an excellent solution for people suffering from diseases of the musculoskeletal system, since the use allows you to eliminate muscle and articular pain.
People who suffer from reduced immunity and often sick with colds, it is best to use brooms from juniper and wormwood, as they have a pronounced bactericidal action and contribute to health promotion.
How to make a bath broom?
Bunction blank scheme for bath.
It is best for the manufacture of bath brooms to cut young branches in about the end of May and early June. It is very important that branches that will be used for the manufacture of a bath broom have not been wondered and well bent.
Among other things, it should be borne in mind that the best time for cutting the branches is the first half of the day, but after the departure of the dew, and it is advisable to do it in dry weather. The branches should not be dry and fine.
It is desirable that they have branches and were covered with plenty of leaflets. The length of the branches should be approximately 50-70 cm.
After the branches are brought home, you should carefully examine them to identify not entirely suitable for the manufacture of a bath broom. Immediately it is worth breaking all the leaves at the handle level and trim the branches so that they are about the same length. The handle of the broom must be about 10-15 cm.
After preliminary training, the branches can be processed to the immediate mate. First, you should collect the correct broom bunch. To do this, it is placed in the center of it the largest and thick branches, while softer and thin should be located along the edges.
The diameter of the handle should be about 3-5 cm depending on the denotation of foliage. This is enough for a broom to get fluffy and high-quality.
Article on the topic: Lepim from polymer clay for beginners: master class with video
Knit branches without using synthetic materials. For example, a metal wire for a bundle of a bunch of broom is categorically impossible, since such a handle in the process of breaking the broom will be warm and it will be very easy to burn hands.
Since it is possible to knit brooms exclusively when using a hemp rope, the twine, or a medical bandage, it is necessary to use these ligament materials. First stands, holding the branches with one hand, make a passing from above, several times very tightly wrapped the twine around the beam.
It is very important that the twelk is wrapped around the handle several times, and it was stretched as tight as possible. In the future, both the end of the twenty must be fixed in the fixing node.
Next, one should take another digestion, located about 3-4 cm above the beginning of the handle. The transit is done in a similar way with the top, and in this case it is also very important that the twine will be wrapped around the handle at least 2-3 times, after which it was fixed with a solid node.
After the branches are firmly fixed with the twine, you can put a broom on the drying. Dry a broom should be dried in a well-ventilated room, for example in the attic, having it so that it is suspended by handle up.
In this position of the branch just dried and the leaves are not squealing with them. You can walk to the bath and with a fresh broom, which did not pass the drying process. In a well-ventilated room, without access direct sunlight, a broom must dry at least 5-7 days, after which it can be moved to a permanent storage location.
Preparation of brooms for a bath day
Properly knit brooms for the bath is not enough to ensure that the use of such a tool only benefits.
Fresh brooms that were relatively recently manufactured and not subjected to drying, it is impossible to migrate, as this will lead to the fact that the leaves are welded and become sticking to the skin, causing burns. In addition, when the "green" broom, the unpleasant smell of boiled hay will quickly spread to the bathhouse.
Article on the topic: Vintage postcards Valentine's Day
Dry brooms must necessarily shade immediately before use in the bath.
To do this, you need to dip a broom in boiling water in about 20-30 minutes immediately before going to the bath. Next, it should be moved to hot water, but not boiling. In this position, the broom must be 5-7 minutes, after which they can be used in the steam room.
To preserve heat, it can be covered with wooden pelvis.