To create a stylish interior in a doll house, the easiest way to make furniture from plywood with your own hands.
In addition, the most independently doll furniture will surely satisfy all the requests of children: it is perfect for the size of the room in a house for a doll or to the cabin of the ship's model, will correspond to the growth of the pupse and look original compared to standard sets.
What do you need to know when working with plywood?
Children's furniture must be primarily safe for games. When the plywood is cut, a variety of sharp sowing on the edges.
To avoid injury and bypass on the fingers of the child, you must process all edges before assembling the product with sandpaper. This measure allows eliminating burstles and make toys safe.
In the manufacture of puppet furniture, you can go and otherwise: the patterns of the product parts are transferred to the phaneer, to circle all the contours of the sharp knife.
Drinking after that leaves significantly less scaling on the edges, but the final grinding of emery paper does not exclude. Even the edges of the parts from the fiberboard after processing the skin becomes more neat and attractive.
Connection of parts in the manufacture of doll furniture is made on glue. The stripping of contacting surfaces is the mandatory stage and in this case. The glue on the product of the product should be applied with a thin layer, connect and press the parts, then wait for drying under load.
For the manufacture of children's furniture, it will be necessary:
- plywood or fiberboard thick up to 5-6 mm;
- Lobzik and a set of lumps to it;
- Glue "moment-crystal" or similar;
- Pencil, line;
- Emery skin with medium and small grain;
- Fabric flaps for upholstery, paints and acrylic varnish;
- Decorative elements at will.
Article on the topic: Openwork crochet: patterns and schemes without failure method for beginners
Small master classes for the manufacture of furniture for dolls will help master this kind of homemade handicraft and independently create an atmosphere for playing in a puppet house.
How to make furniture from plywood?
You need to start with what is simpler. The modern coffee table consists of a small number of simple details (Fig. 1).
To make such a hand, drawings need to be increased to the required size and print. To transfer the contours of parts to the fane or DVP and cut off the jigsaw.
Figure 1. Asset assembly scheme for dolls.
The assembly is made like this:
- To one of the round elements to glue the curly parts of the legs. In order to work out more carefully, you can pre-lay the diameters of the circle, placing them perpendicularly and measuring the straight angle. On these lines and attach legs.
- On the upper side of the same circle, glue the base for the table top - 4 rectangular elements, as can be seen in the photo.
- On top of them on the glue to plant a worktop and dry the product within 24 hours. After that, the table can be covered with transparent acrylic varnish or paint.
If you attach a little more labor and spend time on drinking complex contours, then the puppet furniture from plywood will be able to with carved elements.
Using the schemes in Fig. 2, you can make a table and chairs for dolls of any size. By increasing and printing the drawing, you need to transfer it to a sheet of plywood and cut down along the contour.
Figure 2. Scheme of table parts and chairs for dolls.
The internal holes of the pattern are performed by a thin lobsik pail:
- In sharp corners you need to pre-make holes with a thin drill or seer - it will be easier to rotate when drinking;
- To start drinking, the canvas should first turn into the hole, and then fasten the jigsaw in the frame, tightly pulling the saw;
- When working, it is not necessary to provide strong pressure on the tool, and in the corners it is required to produce sawing almost in place, gradually turning the pink web.
Article on the topic: Holder for napkins do it yourself
To connect the legs of the table (left in the drawing), Details No. 3 and 4 need to be inserted into each other using vertical rods in the center.
Make 4 parts No. 2 (washer) and on the glue to put them on the spikes at the top of the details of the legs. Carefully process the surface of these washers by sandpaper, so that the spikes do not oppose it. Apply glue and attach the worktop (item 1).
For the chair (on the drawing on the left) you need to cut the parts number 1 (2 pcs.) And consolidate between them in the specified dotted seat of the seat (part number 2) and the carved back (item No. 3).
If instead of the sidewalls of the chair to make parts number 4, then when using the same seats for the seat and backs, you can get a comfortable rocking chair for the doll.
Table and chairs cover lacquer or paint in the right colors.
How to make a sofa from plywood?
To independently make a simple sofa, materials for upholstery and foam rubber will be required. Otherwise, the manufacture of this furniture item is not so difficult as carved chairs, and will require only accuracy.
The dimensions of the parts should be chosen according to personal needs, but the principles of their relationship can be determined in fig. 3.
Figure 3. Puppet sofa from plywood.
So, 4 plywood elements will be required:
- backrest (at the top in the center);
- Armrests (at the top of the right and left of the back) - their length should be larger than the desired width of the sofa on the thickness of the plywood, from which the back is cut down, i.e. the connection is made to the connection;
- The base (below) - for this detail you need to make an allowance for a connection to 3 sides: for armrests and backs.
Rectangles place and cut over. If necessary, you can make the details of the armrests of a more complex shape: rounded external angles or expand them up, as in the photo. Cut items glue and dry.
Article on the topic: Master class for the manufacture of Christmas trees from different materials
Cut from fabric, leatherette or skin upholstery of the desired size. For these purposes, you can use the templates of parts, taking into account when the material is starting to bend, as shown in the pictures.
To the armrests stick the upholstery rolled strip, forming their soft surface. For the seat cut a piece of foam rubber with a thickness of about 1 cm and shelter it with the same cloth.
By purchasing the skills of making the simplest furniture for dolls, it will be possible to develop more complex options.
If you increase the patterns and take the material with a thickness of 2-3 cm, then the same furniture with my own plywood can be done for the child.
The connection in this case will need to be made on the tapping screw and glue.