Many in the car spend a lot of time. The comfort of the car gives not only comfortable seats, but also a floor covering. And we ripen the floor of the car carpet. Only not those who put at home, but special.
Choose auto-voltage is not easy. Today the market presents a wide selection of material. Therefore, before buying, you need to get acquainted with all the proposals, and only then stop on a specific sample. In addition to the floor covering, which is placed in the car's salon, the consumer's attention is presented a wide selection of car audits.
Types of Avtokrolina
The material presented on the shelves can be divided into 2 groups. The first group includes all products consisting of two layers. Three-layer products fall into the second group. The basis of all products is the rubberized canvas, and the upper part is made of a synthetic pile.
Three-layer products have another layer, which is located between the rubber base and the synthetic pile. In the manufacture of this layer, polymer materials are used, which, after frozen, become moistureproof.
Three-layer products have a higher pricing policy. If you compare them with two-layer analogues, it is worth noting that they are more wear-resistant and have a longer operating period. In addition, moisture, which gets on the rug along with shoes, does not fall into the floor of the car, which protects it from corrosion.
Avtokrolin has many diverse design solutions. It all depends on the technology of manufacturing the upper layer of the product. The cheapest floor coverings are made by the needle-free method.
The essence of this method is that several layers of synthetic fiber is applied to the base. It is then treated with needles, on the edges of which are notched. After such treatment, synthetic fibers are tightly intertwined with the base. In order for the product to be stronger, it is glued to a rubber base. Then, sent under the press.
Article on the topic: Creative curtains in the bedroom do it yourself. Lambreks for the bedroom
In view of its budget pricing policy Medlemobive Avtokrolin is the most popular. It is resistant to abrasion and has increased strength.
A little more expensive Tafting Avtokrolin. which looks more interesting to the needle-free. Its production technology assumes that the synthetic pile is in the base. Then, the base is fixed with adhesive composition. The result is a looped fiber. However, it is more difficult to care for him than for the needle-worked.
The most expensive view - woven . It is placed, as a rule, in representatives of the representative class. In the manufacture of the product use the jute canvas. It is 100% environmentally friendly, and has increased strength. Such a product has a long period of operation and resistant to abrasion. Woven Avtokovrikov has one drawback - high pricing policy.
How to choose Avtokrolin
In order for the product to serve for a long period of time, it is necessary to choose samples with a tight-based synthetic pile. If the car is actively operated, then you should not purchase two-layer products. You should also pay attention to the strength of the pile.
Another characteristic that should be taken into account is the length of the pile. Products with a short pile are more durable. In addition, they care for them is much easier. Clean the long pile of dirt that falls on the product, sometimes it becomes an impossible task. The only exit in this case is the replacement of auto-shocks.
It is worth noticeing to the color of the product, and, more precisely, its intensity. If the color of the synthetic pile was performed superficially, then in the near future it will begin to discolor. It is worth purchasing the product, the top layer of which was painted along with the basis for which the pile was applied.
As for the color solutions, the auto-line should be harmonized with the color range of the entire cabin. If possible, it is best to purchase a complete set for replacing the cabin. But due to its high pricing policy, allow such a luxury can not all.
Article on the topic: How to remove mold in bathroom on sealant?
Replacing Avtokrolyna
Replace auto-strength is not so easy. The product should repeat the floor of the machine, which has many protrusions and depressions. If it is decided to make an auto-strength with your own hands, then you need to be patient.
For the manufacture of an auto-strength, it will take the material itself, the tool for its cutting, a powerful sewing machine, overlock, adhesive composition and hairdryer.
First of all, you need to dismantle the old flooring. To do this, you need to pre-remove the seats and all removable parts located in the cabin. It is necessary to remove the old floor covering so as to maximize its integrity. It will be needed during the creation of the pattern.
Pre-prepared autocryline must be decomposed on a flat surface. An old auto-line or pattern is stacked on it. All outline patterns need to be obliged. This is the most important stage of work. After the material is required, fix something will be extremely difficult. Using the cutting tool, it is necessary to cut a new flooring along the contour.
After the material is cut along the contour, it is necessary to make holes for fittings under the seat, gearbox, etc. in those places where the product will go to bed curvilinearly need to be trimmed.
It remains to be sewed to the edge of the product and sew the items. Seam must be tried to hide as much as possible under the synthetic pile. The final result depends largely on which material was selected.
The next step is laying the product. All holes must be combined. After laying an auto-strength, you should soak and stretch slightly. At the same time, all the folds formed during laying should be disclosed.
To smooth out the folds formed on the material, in the manufacture of which polymers were used, it can be helped it a bit. It is better if the product will dry in the stretched state. Therefore, it is advisable to dismantle it and fix it in a stretched state until complete drying. Then, to perform the final installation, using a special adhesive composition for fixing.
Article on the topic: Toilet with hygienic shower
You can also make several aircraft horns that will decorate the interior of the car. For their manufacture, you should take a thick material. First of all we make a paper pattern. Then, we carry it on the Avtokrolin and cut the product along the contours. The edges are processed by overlock. You can lean them with leather border. On this, the manufacture of car audits ends with their own hands.