Lambreken Fan refers to the type of central lambrequin. This is an elegant semicircular design of soft folds, externally resembling the opened ladies' fan or sea-pearly seashene.
Lambonen "Fan" resembles the revealed ladies' fan or pearl sink.
Therefore, sometimes in the literature you can meet the name of it as a shell.
How to calculate fabric consumption on the lambrequen "Fan"?
There are several different ways to calculate the material for the manufacture of this decorative element:
- With cord.
- Table.
- Computer programs.
Let us dwell on the 2nd methods.
Scheme calculation of material for lambrequin "Fer".
The calculation of the cord is reduced to the fact that one of its end is fixed on curtains or any rail, and the other is moved to a distance equal to the length of the future lambrequin on the eaves. Tighting up and lowering the cord, achieve the desired proportions of the arc, which it forms, hanging from the rail. 2 quantities measure:
- Hay H is the distance from Gardina to the lower point of the arc formed by the cord;
- The length of the rope itself from one point, where it is attached to the rake, to the other.
This length is fixed and recorded. In the future, it will be postponed on the pattern as L is the length of the lambrequin. The height H will determine the width of the material that will be needed on the sewing of the product. To sew a lambrequin fan with your own hands, you will need another strip of fabric for the plank, on which a curtain tape will be fixed.
Its length will be calculated on the finished pattern, and the width depends on the width of the braid for the curtains.
Scheme pattern lambrequin "Fer".
Therefore, first build the pattern:
- On paper, postpone the horizontal line, the length of which is equal to L - the length of the cord.
- Vertically postpone the value of H - the height of the arc.
- Daughter rectangle. Its dimensions indicate the amount of tissue on the lambrene, but it will be necessary slightly more, with a margin for the manufacture of a plank and allowance for the processing of the product.
- For one's own convenience, during the contamination, the plank should make the pattern of the trapezoid: postpone the top side of the rectangle for 10-15 cm from the side of the side to the center, make the labels and connect them along the line with the corresponding bottom corners of the rectangle. Upper (stupid) corners of the trapezoid rounder.
- Now it is necessary to measure the length of the plank and, accordingly, a curtain braid. The measurement is performed by the port of the t-road ribbon from the leftmost angle of the trapezion along the entire surface of the output built as a result of the upper line.
Article on the topic: how to glue the wallpaper in the corners, if they are uneven
Table for building a lambrequin drawing "Fan".
To calculate the plank, this last value is taken - its length and 2 width of the existing braid plus 2 cm per seam allowance. For standard narrow braid, the width of the plank is 6 cm.
Another way is easier. To calculate the tissue, you need to find the desired lambrequin dimensions in the table (width in the finished form) and the sink depth (height in the finished form).
At the intersection of the vertical and horizontal is worth a value indicating the length of the fabric strip for the product. It is necessary to take into account only the allowances and fabric on the bar.
How to sew a lambrequen fan?
For making it will be required:
You will need a curtainic fabric based on the calculated data with the allowance.
- Curtain fabric according to calculated data, taking into account all points and consumption on the bar.
- Curtain braid in length equal to the measured upper line pattern.
- Chalk, scissors.
- Sewing machine.
1 step. By pattern, place and cut the detail of the lambrequin from the fabric. The bottom side of the trapezium to handle the baker or to the bending, if necessary.
2 step. Separately sew a bar:
- Carry out the strip of the width and length equal to the results of measurements and calculations above.
- Fold it on the face, along. Combine cuts down and fog fled.
- The edges are processed (overpay or pave the seam "Zigzag") if the fabric is played.
- Throw and flash side sections on one side, it will be considered invalid.
- Closer to the fold line (top of the plank), it is covered with a tape with an outstand only on its upper side, leaving the bottom loose.
3 step. Align the lower cuts of the planks and the lower angle of the lambrequin pattern. Fit or leaf by pins and canvas Veser face sides inside the line, which is indicated green in fig. one. Connect machine seam at a distance of 1-2 mm from the edge of the curtain tape only the details of the fabric. The brain itself is not to be applied.
Article on the topic: Flowers in bottles: Instruction +100 Photo of unusual design
4 step. The edges of the seam received will be subject to a curtain tape, align and consolidate it. Pour the line into the edge of the braid. So all the sections were inside the product.
5 step. Pull the cords, collecting folds in the middle of the lambrequin, achieving the desired length of it in the eaves. It is important that the smooth part of the upper limit of the vest (shoulders) on the sides of the folds was approximately equal to the depth of the sink (the height of the product).
Finished Lambriken is rejuvenated, leveling all the seams, and hang to the place that is intended for him. To add and decorate the chart to your liking: other elements of fabric, brushes, beads, etc.