The curtain tape serves as a kind of base for creating all the varieties of folds. In its composition from the inside, it has twisted ropes passing in length. The braid with two lines is sewn behind the upper border of the curtain from the wrong side, after which the ropes are tightened.
To create beautiful folds, the curtain ribbon should not be torn in different directions, it must be durable.
The choice of suitable braid is responsible for the formation of the folds of the desired configuration. The prefabricated ribbon gives folds and assemblies the necessary form is geometrically verified, distributing them for the entire length of the baguette at equal gaps.
Having a tape, the draper can perform any, even the low-spirited work.
Correct tape correctly - very easy. The main thing is to know how this is done. About this and tell.
Today, a wide variety of curtain tapes with different sizes is sold.
A variety corresponds to its purpose. Tapes are:
- exclusively under the hooks;
- with velcro and loops under hooks;
- fixators with velcro for rigid lambrequin and canvas;
- To fix the vertical of the Roman, French, London or Austrian curtains;
- For curtains with champs;
- under the strings;
- Under the cornco tubular.
The tape is sewn to the offline of the curtains, the number of seams depends on the number of shoelaces.
For the curtain itself, the most optimal is considered durable, and not traveling around the tape. Before buying, directly try to assemble the tape on a certain area, stretching for this shoelace. You can safely buy the product when the assembly is hard to assemble. And, on the contrary, buying does not follow that tape, which forms shapeless and not quite uniform folds. More often, the national ribbon is attached to the edge of the curtains, sometimes retreating 2-5 centimeters from its edge. In the 2nd case, when assembling the canvas, a gap remains, which can be used in the cover of the rings or cornice, they can provide the visibility of the curtain "from the ceiling".
Article on the topic: Partitions and screen in the interior (26 photos)
The band ribbon with bows forms the assembly more stringent. It is advisable to apply on the ruffles, which are inappropriate on sliding products. Ribbons having buffet folds are also better to use on the inerable curtains; Treating shoelaces on such a tape will lead to the loss of the assembled pattern.
Hooks on the curtains are appropriate only when there are simple folds. They are inserted into the pockets of the attached ribbon and in rail cornices. Hooks are made of plastic - for not heavy curtains, from brass - for more weighty curtains. Special hooks are required for ribbons with bantle folds and a triple fold.
The varieties of curtain ribbons are determined by their appointment.
Each type is designed to guard the web in a certain way.
Threads for tightening the tape must be pulled out of the seam.
To buy a braid of the required dimension, an indicator of the curtain lifting density should be determined. Each density corresponds to the coefficient that defines the desired ribbon sizes for the curtains. For example, the ratio ½ means: to get 1 m ready-made curtains, two meters of the porter canvase will be required; 1/3 - you need 3 meters and so on.
To the resulting length you need to add 10 centimeters even to prevent edges.
The selection of the curtain tape on the coefficient is based on the assembly of which forms is planned to lay on drapery:
- The collected naturally will not require a large consumption of the material, the coefficient for it is 1.5;
- assemblies like Ryushi, buffers or waffles need a twin coefficient;
- Folds by type "rays" and "bows" - a coefficient of 2.5 times;
- For folding cylinders and triple, the coefficient 3 should be provided.
The finished speed must be rejected and tighten the ribbon on the planned width.
In most cases, the curtain tape is made of polyester tissue. The advantages of the material are obvious: dense adjacent to the curtain, the durable hold of the canvas across the entire width, exclusion of sagging and deformation of the curtain.
Article on the topic: How to make a ceiling box of plasterboard?
What can curtain ribbons consist of:
- from rings for champs;
- from pockets for hooks;
- from seals for lambrequin stiffness;
- Of the two, three or four cords.
Produced a variant of braid glued to the tissue tissue due to the velcro; It is not equipped with cords. All tapes are attached differently and have different devices for these purposes. The "Universal" tapes are produced with a multi-level location of loops and pockets. It is possible to apply on rail baguetas, as well as on the rod. Curtain tapes from translucent materials are intended for tulle curtains or made of organza.
Sequence of the sewing of the national string
Before the work of the edge of the curtain should be separated by reducing the sections and attending them. The edge is separated from the top to the wrong side of the width equal to the size of the tape and a little more. Upon exceeding the width of the subhead of the sizes of the braid, its edges are overcapped, so that during the implementation of the work it is not spoiled.Sequence of work:
- Around the edge of the curtains cut off the edge. The edge is set in a width of 3 cm.
- The curtain ribbon with advanced ends to the inner side by 2-3 centimeters and the exempted laces are sewn to the offside of the curtains, retreating 5-10 mm from the sides and bend to the double width of the poda centimeter in 3-4.
- At the upper border, the tape is trapped on the edge of the entire length of the curtains. The other line is done at the bottom border of the braid.
- If there are three or four cords on the tape, it is addicted along each.
- Twice bend the seam side. Collapse into the edge.
- Relieve threads from a seam for tape tape.
- The chart is trimmed and spread.
Tape tape technology
To pull the curtain tape without problems, the curtain braid should have no less than three tightened laces. They are binding from each end of the tape at the same time. Will be reinforced with a curtain tape when there is an assistant. When performing the procedure alone, the second end is thrown onto the door handle.
Article on the topic: Painting pulverizer: types and opportunities for manufacture with your own hands
Before starting work, the braid should be pulled. The connected cords of the free node are clamped in one hand, and a free hand will be posted with a braid from the edges to the heart, moving the material along the cords.
The canvas is going to folds, and the cords are released, and they are becoming longer. They are screwed into cardboard.
When the folds begin to prevent the assembly process, they are moved to the fixed end of the product. Cutting braid with assemblies measuring tape measure, customizing to the desired width. The final stage is the distribution of the assembly and fixation of the maid (not cut off!) Ropes from the edges of the braid.
Hooks are attached to the ribbon through 8-10 centimeters, after which the curtain is padded.