Window opening without beautiful decoration looks naked and uncomfortable. Because of this, it creates the impression of the incompleteness of the room design, even if it is fully equipped with furniture, textiles and decorative decorations.
Interior Design
What to do if the curtains are uncomfortable length
Window Operation Decoration is the last touch, the final interior design idea. Therefore, to decorating the window and the choice of curtains should be approached weigly and responsibly.
First, decide on the "package" of the window decoration. Tulle is an out -mic element. Dense curtains are used more to perform a protective function: in the summer - to adjust the lighting, and a shorter model (in winter) is used to increase the heat saving of the internal space.
In addition to the correctly selected style and color gamut of the transparent curtains and the porter, the attractiveness of the window decor affects:
- Drapery saturation.
- The presence of decorative details: lambrequins, garter tapes.
- Properly selected product size. Designers are recommended not to be limited to the back of the eaves, but to draw up a window from one side wall to another, increasing the space into width. The length of the product can be different: to the floor or before the windowsill. Short models in various interpretations are used in the kitchen or as a seasonal option that opens the surface of the batteries.
Most of the produced porter tissues are sold with a length of length so that their size can be adjusted, depending on the height of the ceilings. You have to sunmine curtains - when buying a material for curtains without adjusting the length, do not do.
You can contact the studio, but in fact, the entire Portnovo operation will take you quite a bit of time. If you plan to sunmine curtains at home, the result will be better: in the process you can make the necessary adjustments in length, correcting, as needed, inaccuracies at measurements.
Stitching curtains
Basic Rules for Stitching
The technology of stitching curtains at home does not represent a special complexity. You can even sunmatch the curtains without a sewing machine-bottom edge of the tulle or the curtains are handled by manually machine seam.
Article on the topic: primer deep penetration and its characteristics
But before work, we prepare the preparatory operations and take note of the advice of professionals:
- Flexing curtains starts from determining the length of the finished product. Experienced seamstances recommend leaving the fabric in the rude condition for a while she takes the final form.
- We proceed to measurements. Measure out the excess strip throughout the bottom edge of the product, add an allowance to beviving, read the small line in the marked place and cut off the unnecessary material.
- The further method of processing the lower part of the curtain will depend on the type of fabric you use to decorate the window opening. To beautifully shorten the curtains, form the most even as possible and tidy edge. This is recommended to be edited the fabric 2 times (double bending).
This method can be beautifully shortening the curtains, without cutting, as the double fold "hiding" to 30 cm fabric. But this method is not suitable for multi-layer models or curtains on the lining -Cedded to a few layers the cloth will look too massive and convex. To tailor double-sided curtains, handle the cut edge of the zigzag.
- First, sweep the desired bending stitches.
If you treat thin, delicate materials (organza, silk), the tracks from the proof needle can stay on the fabric after removing stitches. To sunmate the curtains with your own hands, use a special tissue strip with a glue surface for pre-fixing: the fabric is sweeping to the desired level, fixed by the pins, the tape is invested between the layers and the hot iron is stroked.
- You can put the curtains beautifully, processing their edges in the edge. To do this, we need a suitable strip of the fabric: it can be purchased in the finished form or cut independently in the width of the curtain. The ribbon is folded in half, raw edges are reheaved inside and the edge of the curtain is inserted between them. Fix pins, we mix the product and drain.
- To correctly sunmine the curtains from the bottom on the sewing machine, adjust the stitch length: for the strength of the line, select a step shorter.
- To shorten the long curtains from light, weightless fabrics, it is recommended to drag the lower part of the curtains. Weighted tapes can be found in specialized sewing stores. With them, drapery will lie with beautiful smooth waves, the light fabric will not pinch on the sides.
Article on the topic: Installation of plastic doors with your own hands: Instruction (photo and video)
Weighted ribbons
We look at the material
To process the upper edge, you need to be used the curtain to the curtain ribbon with fasteners. To date, there are quite a few of their varieties. In addition to the material of manufacturing (transparent or white), the tape for the curtains is different near the characteristics:
- The width and number of rows under the fastening (hook hooks). It is convenient, as located in parallel, with a difference of several centimeters, the fastening strips make it possible to additional length adjustment of the length of the finished pavement.
- Depending on the number of scary threads, the folding of folds is formed in the top of the curtain, from the opposite side of the tape.
- The coefficient and type of assembly. With the help of the tapes, you can adjust the richness of the drapery, while the width of the curtain can decrease from 1.5 to 3 times.
For dense, relief or tissues with a drawing of the assembly coefficient of 1.5-2 times, it is enough: their surface emphasizes the attention of decorative details, additional decoration of abundant drapery for such curtains is not required. But thin, monophonic materials will look richer and elegant with rich and deep folds: they use the assembly coefficient of 2.5-3 times.
In the upper part of the curtain, with the help of the folds of the folds can be formed by the accordion, in a checkerboard, there is a bintal type of assembly, radiation, etc.
Step-by-step instructions for stitching
To enhance the curtains at home you need:
- Tape (curtain).
- Curtains.
- Threads (under the color of the tissue of the curtain), scissors.
The curtain firm is done in the following sequence:
- The edge must be cut. Do not try to save time and effort on the edge processing - a dense edge strip tightens and deforms the canvas.
Sut the edge
- First of all process the side edges. Penate, fix the cloth in the folded position with the iron, then we take and toucher. Temporary threads by reel removed needle.
- We proceed to the upper cut of the tissue and the mounting of the braid. To keep the curtain ribbon looked smoothly and neatly, we sweep the cloth into two and a half centimeters, stroke the iron.
- A curtain braid from two ends before mounting to the curtain, we also fend into a couple of centimeters, freeing the filaments from the curved strips. Then we apply a tape to the invalid side of the curtains, we take and finally fix 2 seams: first the top, then the bottom. To correctly adjust the curtains, the seams are packed from one point, one way, otherwise the material can be wrinkled.
Article on the topic: We make a semi-dry black and finishing tie of the floor with their own hands
- The number of lines can be more than two, depending on the width of the selected tape:
- For ribbon up to 5 cm wide enough two seams.
- The 10-meter tape will require three lines for reliable and neat fixation.
- Ribbons wider 10 cm are sewn four seams, after each row of fasteners.
The minimum indentation between the upper edges of the ribbon and the curtain canvas - half acetimeter.
But this distance can be enlarged for the formation of the top curtains of a beautiful frill.
- From the attached tape, pull out the fastening threads and associate the pairs of the tips between themselves from two sides so that they do not fell out of the braid.
- The lower edge (in the tissues without lining) is processed by a double bending: form the first fold, stroke. Then we convey the cloth again, again weep and we mix. Fix the bending with a machine seam, we remove the rates.
- The stitching curtain is completed. The final stage is one of the most pleasant, this is the formation of drapery. To make it easier to distribute folds across the width, pull the thread on both sides.
Do not cut cords, carefully wind them and disguise under the curtain ribbon. These tips will be needed when it is necessary to dissolve the drapery of the curtains for washing and ironing.
View video design
In Atelier, the price of stitching the curtain is 500-600 rubles per stranded meter. But no one will do the work so diligently and pedantically, as you yourself, adjusting the length of the product, the saturation of the drapery or the type of folds assembly.