Decorative lattices are widely used in garden construction as walls and baseboards for wooden arbors, used as pergolas and trellis, support for curly plants. An independent production of a lattice made of wood is a lesson that, by the forces and a man, practically unfamiliar with carpentry art, and a woman who wished you to create the necessary element of the decor in the garden. Making decorative wooden lattices can be made of thin planks, bar or branches of trees. It all depends on the fantasy creating it and the appointment of the finished product.
Before starting work, process the wood with antipirens and antiseptic compositions.
How to assemble a grating with a rhombic weave?
Prepare need not so much:- Bar 3x5 cm;
- Planck 1.5x5 cm;
- saw-knife;
- chisel;
- measuring instruments;
- glue joiner;
- Self-tapping screws or nails.
First of all, you need to make frames for the lattice of the desired size and form. We will have to collect 2 identical designs from the bar 3x5 cm. Sliced by the standards of bars on the ends are inscribed on half of their thickness and at a distance from the end equal to the width of the bar. Part of the wood with the help of the chisels are chosen from the end to the propyl, forming the "Us", through which the longitudinal and transverse parts of the frames will be connected.
Wooden lattice design.
Lubricated wood sample places and fold the frames, tightening the joints with clamps before drying the glue. When the glue dries, the clamps are removed and for greater reliability of the compound fix the bars with self-draws.
The finished frames are filled with racks, strengthened them to the frame with nails or self-drawing so that they are strictly parallel to each other and were located with a constant step. To facilitate this process you need to make a template-conductor. It can be a piece of board or bar, the width of which is equal to the desired value of the steps of the planks, and the parties are equal and parallel to each other. The end of the conductor is placed and cut off at an angle of 45 °. Applying a cut end to the edge of the grid, the first bar is installed close to the longitudinal side of the conductor and secured on the frame. The template is transferred, again aligning the edge of the frame and its end, tightly pressed to the strip embedded on the frame and put the following, aligning it and fixing it. So fill all the internally space of each of the 2 frames.
Article on the topic: Use in the interior of raspberry wallpaper
The finished half of the future lattice unfolds in relation to each other so that the planks can intersect in the form of rhombuses, and connect the frames among themselves. Speakers for the outer edges of the frames of frames spilulate flush. If you plan to install the frame so that the outer edge of the framework will be opened, then its entire perimeter is sewn from the flatter of 1.5x3.
If it is necessary to protect the inner space, fenced with such lattices, from insects or impacts of wind and rain, between half of the lattice when the frames can be laid a mesh or a thin polycarbonate sheet.
Finished lattices are installed on the necessary openings.
Other options for decorative lattices
For the manufacture of lattice from the branches, it is better to take wood of hardwood.
The grid with a rectangular or square weave is made according to the same principle. The difference will be only in the placement of the planks: on one half of the frame they are mounted in the vertical direction, and on the other - in the horizontal. For a uniform step and parallel, the planks are used by a pattern with a cut right end, in contrast to the previous version.
If a more massive and durable wooden lattice is required, then a bar and rack of greater thickness is used for the filling and frame elements. The manufacture of such a product can be made according to the above technology or to make only one frame, separating in the marked places of removal under the plank depth equal to the thickness of these parts. After that, wood from the recesses is removed, and the planks are fixed in the holes on the glue and self-tapping screws.
The grille made from the trees cut during garden work will be very unusually. The manufacture of it begins with a frame of thick branches, interconnected by self-draws of sufficient length. After that, the internal space of the frame is filled with threads of fond, having them as prompts fantasy and form. You can attach them to the frame by self-draws. With a sufficient thickness of the branches, self-pressing can be copped and together to provide stiffness of the structure. If the branches are thin, you can tight them with wire in the crosslinking places.
Article on the topic: How to strip curtains with a tape: instructions for beginners
Openwork elements from the tree will give ease of garden buildings and serve as a reliable support for Lian. Combining curly plants and decorative lattices, one can arrange a seating area in the garden in a variety of different options.