Motorists about the car body in a terrible condition can say that he is painted with his own tassel. They, as anyone else, know that it is possible to properly put paint, especially for metal and plastic, can only be sprayed. Develop and create crawle with your own hands from the primary materials can each master. Enough to go to the forum and evaluate the mini adaptation, find out the principle of its work. In the simplest model used for airbrushing, the compressor serves the constructor itself. When you make repairs in the apartment, the volume of work is much larger. It is necessary to use spray gun for a vacuum cleaner. Suitable for a small amount of low pressure electric sprayer, mechanical sprayer, and rechargeable paint.
Kraspult do it yourself
Benefits of painting with a sprayer
Kraspopult
I am engaged in construction and repair professionally. I have high and low pressure compressor in your company, electric and pneumatic paint spray for painting walls, HVLP gun to make a coating of large areas, mini diffuser for airbrushing. When pouring the floor, my brigade uses the sprayer on the basis of the plastering machine, converted with his own hands, and the guys shook out pain. A professional approach requires a large list of equipment, and the ability to work with it. Despite this, I know how to make paintopult with your own hands from almost waste and unnecessary details.
My first spray paint was made from the domestic electric vacuum cleaner. In Europe, they do not know how to adapt objects and mechanisms with their own hands. There are no returns in their dust equipment. We also have a cap in the form of a lid with tubes often included. You can wear it on a jar with a chalk or lime mortar and make repairs. The pressure was created by the compressor, or rather the engine of the vacuum cleaner. The pressure gauge and the regulator were absent, the gun too. If you need to work at the top, then the assistant was at the bottom and pressed the "Start" button. All the same, the whitening lime was better and faster than brushes.
The next sprayer for the bliss had a pressure gauge, and the rod, was with a big tank. Mini pistol had an inclusion handle, and a long tube went to the nozzle. I adapted under the repair of the garden sprayer. He put the blink well. He works and now, I use it under Pinotex. The regulator is missing on it, but the pressure gauge shows pressure.
Article on the topic: Quality repair of the sofa with their own hands
Repair using painting has advantages over classic brushes:
- coating layer thinner;
- paint go to bed smoothly;
- Drying time is reduced;
- The finish occurs faster;
- Save time and material.
Even homemade paintopult paints faster. It is only necessary to configure it correctly and adjust the pressure.
What kind of paintopult choose
Kraspopult for painting surfaces
My friend completed the house and was now engaged in the finish, more precisely asked me a bunch of questions at the time when I was hedgehog. How to use the kraskopult he knew. We together were separated by the gift of Pinotex. He asked how to choose a paintopult, and what indicates the HVLP marking.
Depending on the place of repair, the presence of a compressor and the size of the processed area, the choice of collapse is made according to the drive:
- pneumatic;
- electric;
- Rechargeable.
Each paint sprayer has its advantages under certain conditions, you need to choose correctly. Rechargeable can be assumed that it is electric, only runs on a constant current 20B.
Pneumatic sprayers are classified by pressure and volume of work performed. The main types of paintopult used in industry and construction sites:
- The very first HP are high pressure, large losses;
- Eco-friendly and economical HVLP - low pressure, large volume;
- Mini LVLP gun for cars and airbrushing - low volume, low pressure.
There are some more species, but they are used much less frequently, they work from the high power compressor, the air supply regulates the pressure gauge.
For domestic use and tuning cars, mini sprayers are used - airbrons. They are easy to connect to the compressor of the machine through an adapter and pressure gauge. With their help, you can create a coating of mini-surface surfaces, make painting cars and airbrushing.
The collapse device is distinguished by a tank for composition and its location. He can be:
- top;
- Lower;
- Separately, connected via the hose.
Different types of paintopult are used for work with paint, chalk, lime. You can allocate for the use of types of work:
- spray paintopult;
- painting;
- Airbrushing.
Article on the topic: Wallpaper in the form of a world map in the room
In general, all the models of the sprayers are that paint for collapse must be accessed and better to make the composition more liquid - add a solvent or diluted with water.
In size and performance allocate:
- Prashopult manual for airbrushing and coating small areas. Applied by motorists when painting discs, bumpers and other parts. Designers are used for painting. They include an airless paintopult, capable of applying a high-quality layer from a close distance, a mini-low-pressure pistol. A small compressor and pressure of 2 atm is enough to work.
- Repair of houses and apartments It is better to produce an electric mini low-pressure sprayer with a top tank. You can use the battery pack on 20V.
- For the production of painting large areas, metal structures, tanks and transport, the HVLP and HP gun is used. They have a dune launched a wide torch, high coating speed. Equipment works from a powerful compressor on which it is worth a pressure gauge and air supply regulator.
Now my friend knew how to choose a paintopult, and that the HVLP gun is not suitable for airbrushing and mini parts.
Chopping lime requires special sprayers. Mini pads must be rubber. Ordinary pistols for paint and pinotex lime are erupted. Dus should pass larger fractions. You can use battery models if you have to get a small repair, and mini seals are available in stock. The coating scheme is simple, from top to bottom and each plane from the corner.
Air flow, paint and torch form - set up a gun
Making the paintopult yourself
The choice of collapse was made correctly. HVLP pistol, with a powerful electric compressor brought by me. Now my friend was interested in setting up the collapse. We had to start with a wooden structure, and Vadik prepared for its cover pinotex. In my advice, he chose Finnish. The composition is ready for use. The usual paint for collapral must be diluted. This suits the solvent indicated on the package.
Before you set up the paintopult, I told a friend the principle of his action.
- Air from the compressor is served in the gun. The supply can be the bottom and side.
- A quick stream creates a vacuum in the tube with paint, and the liquid rises upwards.
- The paint passed by air passes through a loose, sprayed, forms a conic torch and flies to the treated surface.
Article on the topic: how to paint the walls with water-emulsion
To customize the gun has regulators:
- air supply;
- the amount of incoming paint;
- The width and shape of the torch.
To pre-configure, you can take a solvent and pour it into the tank. At the same time and promoted the gun from paint residues. The compressor has a pressure gauge, but the air regulator is on the handle.
The paint feed regulator is displayed under the tank. Duza not only allows you to change the size of the output mini hole, but also to make the torch flat horizontally or vertically, change the corner of the cone. Usually the gun has a screw in the front of the screw that regulates the overlap of the hole with a wide air tube capillary with paint.
Then we poured Pinotex and Vadik in the tank started repairing a wooden house with your own hands. He evenly applied primer. Began correctly, from the upper left corner and side moves moved gradually to the right. The bandwidth of 2 meters covered on top down one after another with the allen. When they switched to the south, he added a solvent. He did it right, because the light volatiles partially evaporated, without reaching the logs.
Simplicity of design on the verge of genius
Making a spray paint for painting surfaces yourself
I found in the garage homemade kraskopult father. Then there were no ballpoint pens. It was a wide bronze tube with a diameter of 10 mm for air, with a spruce end to reduce the opening. In her, the air was blowing. The creator of the tool was a compressor, a regulator and a raw at the same time.
The thin copper mini tube was attached below, the free end of which was lowered into a jar with paint. The ends of the tubes are located close and in the axis of each other. Such sprayers were used not only for airbrushing. Some even painted their cars when they did repairs. Primitive airbrush will paint small details better than a brush
When the first paint sprayer was done, as a foundation took the father's collapse device. I made an airbrush from the ballpoint handles with my own hands. Only the rod inserted without a tip into the housing, and through the drilled hole brought the vinyl tube into the tank with paint. Over time, he connected the compressor to it from the car and even put the pressure gauge.