Sometimes it happens that after some time after sticking the tiles, grouting between tile seams is covered with mud, fat and yellow. Often it is formed by fungus and mold. All this significantly worsens the appearance of the tiled facing. This can occur for several reasons. The age of facing, violation of the tile laying technology, after the completion of the repair work, there was no special protective processing of the interlocking space, the ventilation system in the bathroom is incorrectly lacking.
Over time, grouting between tiles in the bathroom can be contaminated. To solve the problem, it is enough to know how to clean it correctly.
Wonderful if all the rules for laying tiles in the process of repairing the bathroom were observed. Otherwise, the restoration of the lined coverage will be required soon.
In order to give the walls and semi in the original fresh look in the bathroom, it is necessary to inspect the tiles and tile seams.
Initial inspection of tiles in the bathroom
Perhaps somewhere begins to fall off the tile itself. Then it will be necessary to replace the shaky tile on the new one. Especially for such repairs to buy tiles always follows more required amount by 4-5%. It is necessary to do this for two reasons. First, some collections of ceramic tiles are often removed from production by replacing them with new ones. Secondly, with each party the tonality of the tile is changing.
In order to replace a fragile slab, it is necessary to a sharp metal object (a screwdriver is perfectly fit) carefully clean the adjacent seams from the old grout and remove the tile. Then glue a new tile to this place, after preloading the surface under it. The newly glued tile must be fixed by painting scotch. After a day, it is possible to start savings. If the entire tile in the bathroom is perfectly held and no replacement is required, you can proceed to the removal of the old grout. In order to restore the tile seams, you will need to prepare the following tools and materials.
Article on the topic: Convenient back of the sofa with their own hands
Tools for updating the grouts between the plates.
- Saw for seams or metal sharp rod or screwdriver.
- Hard brush or old toothbrush.
- Rubber spatula.
- Stainless steel spatula.
- Sponge.
- Rag.
- Mix of water and vinegar.
- Primer.
- Grout.
- Protective glasses, work suit, gloves.
Removal of old grout
The restoration of the old grout begins with moisturizing the seams with water and vinegar solution. One part of the water and two parts of vinegar takes. Sponge, we wash all the seams with this solution and leave for 20-30 minutes. After that, you can proceed to the removal of old putty. With the help of saws for the seams, it is neat, not a hurt tile, we clean all the seams. You can do this with a special extender or screwdriver suitable for diameter. Time to carry out such work increases, but the probability of damage to the tile is reduced.
Then we remove all the remnants of the intercutric smelting of a rigid tassel or an old toothbrush. You can also use a vacuum cleaner. It will carefully remove all the crumbs and dust from the interlocking space. Next, you need all the joints with honey tiles to wash with a primer and give it to dry at least two hours. Then you can proceed to the savings. If it took repair or replacement of the tile, so far the adhesive composition is collapsed, meanwhile we clean the remaining seams from the smelting, soil and apply a fresh grouting mixture with a rubber spatula.
Do not forget to wipe the tile with a rag after the priming, otherwise the soil dries and remove it much more difficult. Then we apply the grout of the selected color. Grout is applied with a rubber spatula. Stir the dressing for the bathroom is better than a stainless spatula. Since the volume of the solution is small, then to make a drill with a special nozzle here does not make sense.
Excess the smelts that hit the tile, it is advisable to remove immediately. As much as possible. After a day, the seams completely dry and it is possible to put in order with a solution with a solution of tile. If the usual wiping of the tile is inefficient, then delete contamination with special compositions.
Article on the topic: how to make a bed. Bed from glued bar with their own hands.
After the restoration is manufactured, it is necessary to treat tile seams to a means that has a mud and water-repellent effect. The replacement of the old putty can be partial, but in this case you need to carefully pick it up.
There is a wide range of out of different colors. But I would like to notice that the grouting of white color is possible to be wired by universal closets. If there is a need for a tinting, it should be borne in mind that the entire required volume of the solution is needed to college.
In this way, you can update the seams of the floor tiles and the seams of the kitchen apron. Updating intercine seams in the bathroom - the process is quite simple and accessible to everyone. Some effort and time, and your bathroom will again please you with your cleanliness and freshness.