Karnis bracket - an integral part of the curtain cornice. As soon as this element is not called - both the holder, and the retainer, and even the caliper. The bracket as a separate item does not cause much interest, but in spite of the limited range of modifications, it is still referred to elements of the ceasepill of the cornice.
Bracket - "Hero of the Invisible Front". The main functional load of the brackets is the ability to mount the cornice to the wall or to the ceiling. It is the bracket, more precisely, its location and view playing the "first violin" in determining the method of opening the curtain.
What are the brackets?
The range of support parts is varied, but the main classification criterion is the option of mounting the protruding element.
The cornice holder has various attachment methods that depend on its "dislocation", but most often use the following four options.
- Mounting to the wall above the window
This type of fastening involves the classic type of holders. The strap from the end side is fixed to the wall above the window opening.
- Fastening to the ceiling
The mounting option to the ceiling involves the use of hook or T-shaped holders. They are attached similarly to the previous way: the end is fixed to the surface of the ceiling.
- Fastening to the window frame
- Fastening from the wall to the wall does not exclude the option of using the end holder. This is when two small cylindrical brackets are installed on opposite walls, after which the element pipe is placed in them, which acts and is necessarily fixed with screws.
By design, the bracket holders are divided into two types.
- Open holders are allowed to withdraw the pipe with the porters or tulle. Therefore, the degree of convenience during removal, for example, rings or other decorative elements increases.
- Closed calipers are limited in the matter of removing the pipe, but reliable in the mechanism of the entire design.
Article on the topic: Combination of color - doors, wallpaper, plinth, floor and furniture
By the number of retention rods, holders are divided into:
- single;
- Double.
What should pay attention to?
Did you encounter the installation of the cornice for the first time? Do not know how many brackets need to make the whole design look harmonious and reliably?
This is a frequent question. And the specialists answer it ambiguously, paying attention to the fact that it depends on the number of cornice length, the weight of the curtains and the eaves in general.
If you adhere to the standard calculation scheme, then everything is simple: two brackets are sufficient for eaves a length of no more than 150 centimeters.
And if the length of the eaves does not match the classics? The answer to this question is found. It is believed that each subsequent meter should be added to the holder.
Thus, summarizing the foregoing, we emphasize the principles of high-quality installation of holders for the cornice.
- For one cornice, you need at least two calipers, each of which will be placed around the edges.
- In the event that the length of the eaves reaches the indicator of 2 meters and more, it is necessary to increase the number of brackets in order to provide an eternity protection against saving under the severity of the curtains.
What length should the caliper be? It is also one of the frequently asked questions.
Remember: choosing the length of the bracket, rely on the width of the window sill. Otherwise - when the caliper is shorter than the windowsill, - closing the curtains, you will observe the bend, and as a result, the overall impression of what they saw will not justify hopes and expectations.
It is important to know that the holder must be longer than the removal of the windowsill. If the model is standard, then it is possible to increase it in length in the range of up to 15 centimeters. But there are different situations. Sometimes the windowsill protrusion is more than 20 centimeters. What then? Then the curtain appears bending, "Gorb". If your eaves are manufactured individually to order, the bracket can even increase by 40 centimeters.
Article on the topic: Ropes on the balcony: species and installation (photo)
Want to walk along the path of least resistance - choose the brackets that are adjustable in length.
Structure of brackets: study the design
Holders for the eaves are very simply arranged. They consist of two main details:
- rod with hook;
- The ring for the carnis rod (the ring is not necessarily one, there may be several, for example two or three).
The number of rings has a direct dependence on the number of rows of the porter.
The textile materials and decorative elements industry is so developed that it is no longer surprised by the fact when the holder can see the holder of non-standard form.
Very often, acquiring cornice, you buy with him a whole set of additional elements. But how to be if you still purchased a cornice without additional components? You should choose the holder yourself. But before you go to the store, learn information about the materials and functionality of the calipers.
As materials for the manufacture, plastic, wood, metal, and, and, in principle, all, from which the eaves themselves are made.
- Plastic brackets are used in case the eaves itself are small by weight and in length.
- Wooden and metal brackets choose when the eaves are weighty and designed for a two-meter window.
Mounting bracket: do just, but carefully
In order for the installation to go easily, quickly and without additional costs, we recommend prepare a workplace in advance.
You will need: perforator, dowel plastic and screws.
- Pre-draw marking works (determine the place of fixing holders). Use for this roulette and level. Be sure to pay attention to the distance along the edges of the window. So that everything looked professionally and symmetrically, the distance from the edges of the window opening to the holders should be strictly the same. The exception is the option when mounting is made along the entire wall line.
- Drill holes in the size of the reference parts.
- Insert the dowels in the resulting holes. The support of the caliper is carried out either by self-draws or dowels, but their number depends on the cornice material.
If a plastic or wooden eaves - use one dowel, if metallic - only three. After all, the metal cornice is much honesty than two others.
- Fixed reference design. Fix with screws.
Council
Be sure to check the correctness of a certain distance before you finally lock the second caliper.
Brackets for cornices carry a double load: practical and aesthetic. And, of course, I want both sides to be at the height. The result depends on the correctness of the action during installation, from the correctly selected type of holders and on the degree of ownership tools and the basics of symmetry, therefore it is not worth discounting step-by-step installation instructions, even if you are not new to this.
Article on the topic: Ventilation in the floor in a private wooden house