Wardrobe with your own hands? [Design, installation and finishing]?

What a girl does not dream of a more accommodated storage for clothes and shoes. But it is not always possible to make it possible to solve these questions without loss in precious square meters of useful area. Even if there is enough space, a dressing room is a very complex project. It is possible to equip such a room - let's see how to organize everything.

Pluses of a dressing room

In most small clothes for clothing storage, a wardrobe is used, many in private houses have it. But a separate, even a small room allocated for such tasks is much better.

Wardrobe room is very convenient and economically. In a separate room in the bedroom, the hallway or in another room you can fit significantly more clothes than in the largest closet, and everything that is stored there will always be at hand and in sight. No longer need to rush between the cabinet and bedside tables.

All things will fit in the dressing room: it's underwear, and outerwear, bags, shoes and various accessories.

Another plus is associated with the fact that the wardrobe allows you to remove bulky cabinets from the apartment. This will facilitate the visual perception of space - only light furniture will remain. As a result, the whole room will only benefit from it, you can install in the living room soft corner or other desired furniture in place that previously occupied the closet. In the hallway you can remove with eye hanging clothes.

To equip the dressing system with your own hands - it is also the opportunity to save. It is enough to sit down and calculate what will be more profitable: to purchase several lockers, storage boxes, shelves for equipping space in the wardrobe or spend money on a massive cabinet, two or three chests and several tumb.

Separate roomy room for clothing multifunctional. Here are pillows, unnecessary blankets, mattresses. There will always be a few shelves for a photo album and boxes with different trifles. Here you can store the ironing board, and if the room is large, you can even arrange laundry.

In which cases to make a wardrobe inexpedient?

A separate premises for storing the outerwear, linen and shoes, various trifles - this is the desired thing even for a small apartment. Another thing is when one-room apartment is an economy segment. Steal the precious space here is nowhere, and there is no storage room in such apartments. So in this case, it is inappropriate to build a wardrobe. In any other cases, such a functional room will be only plus.

Wardrobe can be equipped even in a small niche

Materials

The modern building market offers a lot of different materials that can be used to build a dressing room in the apartment. Gypsum, wood, metal, plastic are widely used. You can independently work with any materials, the main thing to purchase them in the right amount. When finishing, use glass wallpapers, tiles, paint at will. The choice of a suitable material depends on the selected diagram and planning of the dressing room, as well as the features of the room in the apartment.

Dressing room made of plasterboard

It must be borne in mind that plasterboard is a material that is not intended for the manufacture of furniture. This is still finishing building material for alignment of walls, ceiling, dry tie for low-loaded floors. And the wardrobe is something like furniture, plasterboard here will be too heavy and fragile.

Article on the topic: Little Rooms: Interior Design Rules (+50 photos)

Furniture solutions made of drywall are based on a frame, which has a rather complicated design.

After the system is collected, it will be necessary to carefully do finishing work. For the arrangement of the utility room, and the wardrobe and there is a kind of rider, the complexity and the total price of the project together with construction work is too high, and the capacity is reduced, since the durable shelf of plasterboard will be in thickness not less than 5 cm.

However, for the wardrobe room, it is important for the presence of a mass of deaf cavities that are trimmed with vapor-permeable materials. Humidity will be regulated, Gypsumaton will eliminate sharp changes in the microclimate in the apartment. But this does not like clothes, nor shoes, nor any other things.

On video: Creation of a dressing room of plasterboard.

Dressing room made of wood

There is no guarantee that clothes in the dressing room can be wet. Excess moisture will lead to sharpness. The wardrobe from the tree will allow to remove the extra moisture - even the painted wood has a pore, it can take extra pairs of moisture from the air.

Laminate has all the advantages of wood, but it does not possess porosity. However, laminate has such advantages as affordable price, high strength and resistance to moisture. Only there is another nuance - unlike the tree, the laminate is not able to breathe, and it is very important for the dressing room.

Laminate is a good replacement of wood, but you can take the chipboard, and LDSP, often there are wardrobes from plywood.

How to make a comfortable dressing room yourself: step-by-step instructions

Start independently build a wardrobe space is easy. There is a lot of interesting projects. It is important to choose the right scheme relative to the layout of the room. It is also necessary to have skills to work with wood or plasterboard. Work is better to perform in steps - a detailed step-by-step instruction will help any homemade master.

Step number 1 - planning (diagrams and drawings with sizes)

The development of the first part of the project will not be difficult and will not take much time. Now there are already ready-made drawings and schemes that you only need to adapt to a specific situation. There are interesting ideas for a small room, which is very relevant for many.

There are several popular schemes:

• Angular;
• Linear;
• G and p-shaped schemes;
• Parallel structures.

Considering the drawings, pay attention to the size. Design is developing on the basis of how much the area is. The most comfortable and standard are the premises of 4 m2. This room will perform its original functions on storing things.

Corner dressing room

At the first stage, we make a project - planning is very important. The angular construction allows you to get away from the optimal size of 4 square meters and use less space. Even the size of 1.5 × 1.5 m will be sufficient for such a design.

As materials it is recommended to use plasterboard:

• It is easy to work with him even at home;
• After installation work there is no garbage;
• The overlap will give the minimum load on the surface;
• Hypzarton partitions are easy to separate.

Place drawers and shelves can be in different ways, but it is much more convenient to distribute them from both walls in the resulting room. If you use only one wall, it will be irrational. Internal arrangement is better to design with the use of open shelves - racks will facilitate access to clothing, as well as liberate space. The door is chosen, given the limited space.

Linear design

This location is convenient to apply near the walls. Build such a room at home easily, and it is relevant in the bedroom. There are no beveled corners - it will facilitate the process of furniture arrangement. Easy to distribute internal elements in such premises. You can equip retractable hangers for clothing items. One hand movement is enough, and the desired clothing will be in sight.

In the design process, it should be borne in mind that the optimal depth of the wardrobe room is 1.5 m. However, partitions inside will narrow the space - do not install them. If the housing area allows, the narrow premises will not be comfortable, and there will be little free space.

Article on the topic: Mirrors of various forms and types for the hallway

G- and P-shaped design

Planning the letter G is when the dressing room is part of the room. The peculiarity is that the partition is not necessary here. The instruction recommends using only open-type racks, as the issue of saving of precious space is very acute, as well as the issue of ergonomics. The same instruction provides for the almost complete absence in the design of any partitions.

If you look at the sketch, it is clear that the method is very economical - additional materials must be purchased for the manufacture of partition.

Also use the structures of the letter P. They are good only for large and spacious rooms, but allow you to place a lot of clothes and rationally fill the space.

What are good p-shaped wardrobe:

• differ in high practicality and very interesting in terms of design;
• Due to the unusual design, the interior can be emphasized;
• You can get optimal storage for clothes and not only;
• Such schemes suggest a large number of different boxes for small things, gloves, accessories.

If you correctly pick up a color design, you will get very simple, functional and externally attractive wardrobe room. Due to the availability of functional elements, it will be very comfortable to use it.

P-sample planning of the dressing room is not recommended for use in long and narrow premises.

Parallel Type

Design and arrangement of the wardrobe room according to such a scheme is the easiest solution. This is a popular example, often used at home by conventional masters. More often such a design can be found in the hallway and storage rooms. To implement the design, it is necessary to organize only a few partitions. Also used separated furniture kits.

Such a scheme is good if you build it in the passing room, but not in the corridor. If the room is deaf, you should choose another project.

Step # 2 - Installation Work

Let's see how to make a dressing room. The desired option is selected, design work is over, the location is selected. It remains to realize the drawing in metal and drywall. Plywood is suitable, you can make a design from Plate of LDSP.

Step-by-step instructions for installation work:

1. First we make markup according to the drawings and the scheme.

2. A frame assembly from the profile is being built to which the entire design will be attached. In these works, the main accuracy. Profiles should be secured as reliable as possible - they will withstand high load.

3. When the frame is ready, you can sow it with plasterboard sheets, plywood or chipboard on both sides. As a result, a niche is formed, into which the electrical wiring is then hiding, the lighting system.

4. In the case of drywall, all the seams that turned out as a result, are carefully sampled by a special ribbon, and then swell.

On video: installation of storage room (dressing room) from drywall do it yourself.

Step No. 3 - Wardrobe Finishing

When the design is ready, you can move to finishing work. There are several ways: finishing with plastic panels, ordinary painting or wallpaper. The last option is the easiest.

Wallpaper

Wallpaper is, of course, not the best solution, but one of the budget. It should be pre-prepared the walls: clean from dust and dirt, when you need to sharpen irregularities and joints (in the case of plasterboard). Casting technology is no different from the usual. Wallpapers can be chosen on personal taste.

Ceiling

Here you can use drywall systems, PVC panels, lining - you can do everything that wanted. But it is not necessary to complicate the ceiling design. It is enough for the ceiling to hide the wiring and lamps. This will be enough. Ceiling can be painted or punctured by wallpaper.

Doors

It is best to design a design in such a way as to use sliding doors. They are not only functional, but also can add a highlight to the design. Even children can use such a door - so easy. Install sliding systems is also very simple.

Article on the topic: Aquarium in the home interior: Variations on the topic of marine exotic

Corner dressing room requires a little different approach. Here you need the appropriate virgin - a radius or door-accordion.

Step number 4 - Lighting and ventilation

This time should pay special attention. Lighting should be enough. If there is natural lighting, then it is good, but it is better to organize and optional - it can be any lighting devices. The number of luminaires is determined by room size. So, in a small dressing room just only two light sources.

It will not be superfluous and the inner backlight of the linen drawers using LED tapes.

It is very important to choose the right ventilation system in the wardrobe room. It allows you to automatically ventilate the room and guarantees protection against unpleasant odors and dust. It is better to choose special ventilation solutions.

Ventilation scheme in the wardrobe room

If you do not want to buy an expensive option, it is possible to do the fan installation. It will also be necessary for it. Power is calculated according to the following formula - the volume of the room is multiplied by 1.5. This will be the total performance.

Step number 5 - Arrangement: Filling and storage systems

It is necessary not only to collect the design and spend the light there, much more important than the internal filling. It also needs to be design. The ergonomics and functionality of the dressing room depends on the proper filling.

Shelves

Shelves are better to make retractable and place them so that between them it was 35-40 cm. The depth is made more than 40 cm. On the wide shelves it is convenient to put the clothes with stacks. In cases with long shelves, one or more additional supports are needed.

Stellagi

When choosing the location of racks in the room, it is not necessary to forget that the linen is stored in them, as well as various little things. You need to immediately think about what will be stored on open racks. This is a practical solution, so they should be made of different sizes. It is important to determine the needs and can be safely acting.

Hangers

Filling the dressing room should be modern. Innovations come to the rescue. There are special hangers for trousers and skirts, clothing on them is fixed very softly, and there are no mint traces. The hangers themselves are nominated from the niche. They have different sizes, which is very convenient.

You can also purchase a convenient device - this is a hanger-organizer. The device is used to streamline things.

You can install a pantograph - this is such an elevator. It will allow the use of a wardrobe space up to the ceiling and there will be no damage to comfort. The elevator is attached to the crossages on the sides and to the rear wall. The only drawback is can only be used with easy clothing.

Shoe storage systems

You will have to buy a special module. It is a compact retractable system. There are suspended organizers, as well as stands. A specific decision is selected based on their needs and size of the room.

Interesting ideas

With the help of sliding doors in the bedroom, the dressing room is separated from the rest of the area. The facade of the door must be made in such a way as to fit into the design. But such ideas are relevant only for spacious rooms. Take a look like it looks in the photo.

In one of the cottages involved attic as a dressing room. The walls have enough height to place hangers for a coat, fur coats, jackets. In narrow places stored shoes and accessories. But it is relevant for a private house.

If there is a staircase, there is a free space under it. Here you can equip the dressing room - it will be hidden from the eyes, it will not english space. It's perfect. You can collect special retractable designs and a body of wood and plywood, which will be hidden in the attribute space.

Look, looks like a dressing room in the photo. Although the staircase and at an angle, it did not prevent the use of space.

Proper arrangement is the most important thing. Only on it depends on how comfortable the wardrobe room will be.

Nuances when designing a wardrobe room (2 video)

Ready projects (76 photos)