Most of our country's inhabitants are limited in choosing a housing. First of all, this is due to the Financial Regulations. After all, for a relatively small amount of money, you can only purchase an apartment in its area. Of course, in such a dwelling it is very difficult to place all items so that in the end it was and comfortable and beautiful. In such a situation, the furniture transformer saves furniture.
Table Bed Transformer Significantly saves space in the room.
Currently, in specialized stores you can find a huge range of this product. But here again the question arises. Not everyone can buy, for example, a transforming bed that is not at all cheap. Then we will talk about how to make the table bed transformer with your own hands. This option is suitable not only for people with a small apartment, but also for adherents of minimalism in the interior.
In order to make a conceived, you will need quite a bit of time and, of course, the necessary materials with tools.
How to make the bed bed yourself?
In fact, there is nothing complicated in the manufacture of a table-bed. Initially, you need to organize the area in the wall in which the bed will be placed. For these purposes, you can use the shelves on the wall, rack or wardrobe. In addition, you can organize space using plasterboard sheets.
Separately, it must be said that in the process of assembling the part of the bed, which is located below, can be located at the level with the shelves or to be located a little deeper. There is only to solve you.
Mechanism transformation table bed.
As for the table, it must be mobile. This is necessary so that when closing the bed he did not interfere. Consequently, you can make the table that will be perfectly approached by the size. As an option you can make a bed with your own hands as a support that the table will perform. Thus, the bed will have even greater stability. In any case, the Bed Table Transformer will be the best solution for a small apartment.
Article on the topic: how to choose the facade glue
In order to build a bed Table Transformer with your own hands, you need to take into account some points. Well, for example, the one that the legs of the bed must be moved at mandatory. During the assembly, they must go to the available space. In addition, legs that have a bed transformer can also act as the side walls of your cabinet. In order for the design to look the most harmonious, make legs from the same material as the cabinet itself.
Detailed instructions for manufacturing bed transformer
Table bed transformer.
In order to make a bed transformer with your own hands, you need to perform the following steps:
- The first thing you need to know is about the components that are necessary for creating a bed: box, bed and lifting mechanism.
- You can make a box separate or turn it on to the existing furniture set, for example, as a cabinet. In the process of holding calculations, you need to take into account the fact that the bed transformer during the folding process will sweep the box. Consequently, the box must be mandatory to be attached to the wall made of brick or concrete.
- The walls of the box located vertically should have a thickness of 25 mm, and horizontal - from 16 to 25 mm.
- In the box, of course, it is impossible to exclude the presence of such details such as the plinth and a stubborn regiment. Do the back wall, solve only you. When presented it, the bed will acquire a finished look, as well as the whole design as a whole will become more rigid. Bed transformer is recommended to be made from chipboard. And, on the contrary, for the manufacture does not fit the furniture shield.
- It is necessary to fix the details among themselves at a distance from each other about 25 cm. The wall, which is located behind, should be spinning until the box is attached to the wall. If your apartment has perfectly smooth floor, the box can be installed directly on it. Otherwise, you will need to create an additional basis.
- When creating a box, it is necessary to consider the size of the future mattress and the thickness of the back of the bed.
- As for the bed, its composition includes the following elements: side boards, back, headboard, base and mattress. The mattress is attached to the lie through the belts specially designed for these purposes. The facade flaps are attached to the screeds using transverse corners for mounting.
- In order to connect the box and the bed, the lifting mechanism will be required. It is he who acts as a binder. It is best to give preference to the mechanism already in finished form with a gas pipe. Such a device is guaranteed to open and closes more than a thousand times. In addition, this mechanism will create all the conditions for fixing the bed in any position. Your transformer bed is fully ready for use.
Article on the topic: How and what to whiten the bath at home
Furniture Transformer - rational solution for a small apartment
As you understand, make an unusual bed with your own hands is not so difficult. In addition to the bedroom, similar furniture can be placed in other rooms in the apartment. For example, in most cases, people suffer from a small kitchen area. Here, the furniture transformer comes to the rescor.
You can save space of the room using a folding table, which in any moment you need can be collected or disassembled.
It should also be said that this table can also have additional inserts that have property to advance. Thus, you can kill two hares: get a full dining table and save space so important for you.
Whatever furniture to the transformer you prefer, as a result, in any case, you will receive a functional object of the interior in any case and can save such a valuable area. Moreover, this furniture can be placed in any room in the house.