To make the setting of the room as convenient and comfortable as possible, use a lot of furniture is not recommended. But where exactly keep things, especially if the family is big, there are children of different ages? The way out can be a comfortable and spacious wardrobe, which is not so difficult to collect with your own hands.
The wardrobe compartment is perfectly suitable for small rooms and for large, it can be embedded in various niches, and you can put in the middle of the room, separating it into two parts.
Such a design can have various forms and sizes, its main difference is to use a special sliding system for opening doors, which are shifted to the parties on the guides. The wardrobe of the coupe with your own hands, the drawings of which can be found on the Internet in a wide variety, will save space in the apartment.
Advantages and design elements
Cabinet options.
The wardrobe is distinguished by numerous advantages over conventional cabinets and headsets. It can be installed in any niche, he will have a place even in small rooms. Features of the design assume that all shelves and retractable boxes are obtained as deep and convenient as possible, with an externally, the massiveness of the design is almost imperceptible.
Instead of the usual opening of the door, which themselves occupy a lot of useful space, the wardrobe has a sliding mechanism. The design can be put even in a close corridor, keeping enough free space for its full use.
To make a wardrobe with your own hands, it is necessary to calculate exactly which elements will be required during the body assembly. Such calculations are carried out on the basis of a pre-compiled scheme. It is recommended to use special programs, you can contact the specialists.
For the body and shelves of the future cabinet, you need to use LDSP, having the desired color and appearance . Such a wardrobe, after the assembly, it is not necessary to paint or varnish, it will have an attractive appearance and without such works. It will only be necessary to glue the decorative edges with iron, they completely hide the sections. For fasteners of all elements, self-tapping screws, corners, dowels will be used.
Article on the topic: Interior doors Zebrano in the interior: photo, combinations of colors
The compartment assembly scheme includes such elements:
Tools for making a wardrobe coupe.
- Horizontal parts with dimensions 150x60 cm - 3 pcs;
- Vertical side walls with dimensions in 200x60 cm - 2 pcs;
- Vertical partition with dimensions in 135x60 cm - 1 pc;
- Vertical partition with special compartments under a shelf 32.5x60 cm - 3 pcs;
- Horizontal part 150x30 cm, which will be used as a shelf over a rod for clothing - 1 pc;
- Shelves with dimensions in 30x40 cm - 3 pcs.
Tools for work
To perform work quickly and correctly, you need to prepare the following tools:- Drill used during the assembly in order to spin the screws, drill holes in the design of the future cabinet. For a drill, it is necessary to take various drills and nozzles;
- Perforator, if during the work it will be necessary to make holes in the walls;
- An ordinary hammer and rubber, which may be required to bring individual elements;
- Construction level, roulette, metal line;
- PVA glue;
- steel or wooden corner;
- wood hacksaw;
- Self-tapping screws, dowels, furniture cloves.
Cabinet assembly: instruction
The wardrobe of the coupe is collected in such a sequence:
Cabinet circuit with sizes.
- You need a design detail with dimensions in 150x60 cm to lay on the horizontal surface, best on the floor. The side boards are fixed to it. It is possible that to install the cabinet you have to cut part of the plinth near the wall. All fasteners are carried out using dowels, metal durable corners, screws. For shelves and side parts, it is not recommended to use plastic dowels, since the attachments are not so reliable.
- According to the scheme, all other shelves are set: 2 with dimensions of 150x60 cm, located directly under the rod for clothing, transverse blocks of small size 32.5x60 cm and the vertical separating board 135x60 cm.
- All shelves and vertical partitions are mounted using self-tapping screws and corners to side surfaces. It is best to use Evrovint, which is used today to build most of the furniture. It is distinguished by an increased level of reliability, lasts long.
- Mounted the upper shelves that are located on the side of the case and do not close the doors. They are attached to the already installed horizontal board of 150x30 cm, to the vertical outer partition with a step of 50 cm. This is the optimal value, such shelves will be very convenient to use.
Article on the topic: Formwork for foundation: how to make and install + ways to save
Collecting the wardrobe with their own hands, it is necessary to remember that the massive upper cover requires maximum fastener. It is best to mount it from the inside, it is possible to use strong metal corners and screws for this. Additionally, the cover is strengthened from above to give the stiffness design.
As a result, it turns out a cabinet with your own hands from two offices, where you can have shirts, outerwear, underwear, towels, bedding and much more. On the one hand, there is a large and spacious shelf, there are 3 small compartments that are suitable for linen. At the top of the design there is a spacious compartment where you can lay things that are not used often.
Installing Door
To assemble a wardrobe with your own hands, you must remember that the doors are one of the main parts for it. They can be made with their own hands or simply order with already existing mirror or glass coating. Such an order will save time on the assembly of doors, since there is no experience in working with mirror or glass surfaces, and the drawing can be performed far from each.
But even to order doors, it is necessary to pre-conduct calculations. The width of one sash should not be greater than 1 m. If the width of the entire cabinet will be 154 cm, then it should be divided by 2. Then the width of one sash will be at least 79 cm: 77 cm net width and 2 cm for nailed when closing.
During the calculation of the door height, which will have a wardrobe, it is taken into account that the height of the podium should be subtracted (if it is). For example, the height of the ceiling, where the cabinet will be installed, is 250 cm. In the absence of podium, the height of the linings that are located below are taken from above. Their thickness is 1.6 cm. It is necessary to take into account the gap for the wheels, which is 1.5 cm from the upper and lower part. As a result, the height of the door is: 250-1,6х2-1,5х2 = 243.8 cm. During calculations, it must be remembered that the dimensions may be different. It depends on the thickness of the plates used for gaskets, from the height of the cabinet itself, the size of the chaoles and from many other factors.
You need to start the installation from the guides that are cut in advance on the segments.
Door assembly scheme for cabinet compartment.
Article on the topic: how to sew a chart into a children's room yourself - the fastest way
Such segments should be freely placed at the bottom and at the top of the cabinet, do not interfere with the move the doors. Mounting guides should be parallel to each other, for this you can use a plumb and metal line. The mount is made using press-washers and self-tapping screws, first fixes the upper rail, then with the help of a plumb - lower. For the bottom guide rails, it is necessary to use stoppers.
After the rails are installed, you can start fastening the doors. It is best to perform such work together. The first is the most distant sash, while the rollers are inserted first into the upper guides until it clicks, and then only in the lower. We must immediately check that the sash freely moves, nothing is clinging.
After that, the second sash is placed if there is a third. If necessary, the door can be adjusted, tightening special bolts on the rollers, this will make it installs them as reliable as possible, the sash will not fall out during use. The latter hooks, rod for clothing.
The wardrobe is a piece of furniture that can be conveniently placed in any room. Such designs are ideal for corridors, living rooms, bedrooms. They differ compactness and attractiveness thanks to the beautiful doors. The cost of a ready-made cabinet is quite large, but it can be collected with your own hands, saving about half of the cost and even more.
The only ready-made item that will need during work is the doors with a mirror or glass that can be easily ordered on the necessary dimensions in workshops specializing in the manufacture of furniture for home.