Facrock-style finish today in our country is becoming increasingly. It is the finish, a stylized appearance, and not at home built in this technology.
Very often you can meet whole streets and even cottage villages, where all houses, like one, have facades in the style of the Facrow. It looks European cozy and colorful.
The technology of the construction of half-timbered houses came to us from the historical quiet regions of Germany, Sweden and other European countries. Here they are as familiar, as in our villages, wooden houses from the log cabins are familiar.
Facrifical houses are erected according to special technology. The basis of the structure of the frame of wood or metal, which is assembled in a special way.
The frame of the half-timbered house consists of beams, racks and sinks, which are located horizontally, vertically and diagonally, respectively.
The awareness of the construction technologies of the Facremmer gives the feature of the design of the facade. It is not accepted to close and decorate the power frame, on the contrary, the beams should be visible. They create a special pattern that is difficult to confuse with other options for housekeeping.
The gaps between the beams are usually filled with brick or stone, we often have wooden houses. There are some more traditional features of construction related to half-timbered homes.
- Modern house in the technology of the Faxer more than seventy percent glazed. This makes them especially colorful.
- The projects use a predominantly duplex roof, convenient enough to protect against precipitation.
- The walls can be built of wood, brick, stone, previously spaces between frame elements were filled with saman.
- Roofing material, as many years ago, is a tile.
If you are planning to build a house for half-timbered technology, consider that the large percentage of glazing is inappropriate in our climatic conditions. You can literally disperse on heating.
Article on the topic: Nuts GOST
Much more practical turns out to be a facade design in the style of Fakhverk, and not complete compliance with technology. As the basis will serve any home: both wooden and stone.
Consider in more detail the features of the planning and installation of the facade of the house in the style of the Facrow, which you can do yourself.
Facrite finish with your own hands
Before you get started, it is worth deciding on the materials you will use to design the facade.
The traditional construction of half-timbered houses involves the use of wood for a frame. However, today this tradition is not necessarily necessary. There are three options how to make a half-timbered facade:
- Facade shuttering
- Facade of the cement-chipboard
- Finishing with polyurethane panels
The first option - plastering - is perhaps one of the most time consuming. This way is better to use if you have a brick house, especially if it is old enough.
The plaster is applied by a uniform layer, which smoothes and levels the surface. Consigned, but not yet finally dried plaster covered with light paint. For the background, the front is usually used white, beige, light yellow colors.
Finally, after drying, the plaster is mounted by a falsebrus. It can be ordinary boards, painted in color darker, contrasting background. They additionally can be covered with a patina to make up.
It is easier than plastering, will use a cement-chipboard. This is quite dense and reliable material that is not scared by the impact of precipitation and sun rays.
In this case, first are attached to the walls of the house beams, and then the space between them is filled with chopped into pieces of the desired slabs. It is worth noting that such a facade will be not only an ornament, but also an additional insulation for the house.
Finally, the polyurethane panels used to finish the facade in the style of the Facrow, can rightly be considered one of the easiest and most affordable options. You can easily choose the panel of the desired color, including beige and brown.
Article on the topic: How to effectively clean the cast iron from rust?
Such imitation of the step on the facade of your home will look very realistic. At the same time, such a covering will be not too expensive.
If the installation is made in compliance with existing technologies, you can be sure that the sheathing is not one year. It should not be afraid of cracks, chips or deformation of the material.
Polyurethane facade finish is much cheaper than playing a wooden pattern on the facade. The material itself is glued to a special glue.
Choosing one or another way of finishes, do not forget to explore the pros and cons of the options. Some will be convenient for finishing a wooden house, and some are suitable for stone buildings.
You can learn more about the half-timbered on http://www.peura.ru/