After selecting the desired model of the washing machine and delivery to her home before each owner of this technique, the task appears to install a new unit at a suitable place, and then connect the machine to communications.
Place Installation
The question of the installation site of the machine long before its acquisition should be considered. The most common and frequently used option is to put equipment in the bathroom. It is chosen in most cases. However, the owners of tiny bathrooms often decide to set the machine in the kitchen. These options are approximately the same as difficulty, since access to water supply and sewage will be free and in the bathroom, and in the kitchen.
Much less often, the technician is installed in the hallway, because in this case it is required not only to highlight the place for the machine, but also to withdraw communication, which may be difficult. The compact machine can also be installed in the toilet, organizing a plum in the toilet.
Preparatory stage
Before taking on to connect the washing machine to communications, you need to remove the packaging from the equipment and remove parts that kept the items of the machine during transportation. We are talking about bars, bolts and other fasteners. Without removing them, it is impossible to turn on the machine, as it can damage the drum and the exit of equipment.
By rejuviving the transport bolts, the holes from plastic are inserted into the remaining holes. Do not forget to add all the details filmed together in one place in case you have to access the service.
How to connect to water pipe
To carry out this stage of installing the washing machine, flexible hoses and rubber gaskets should be prepared for compaction seals. You also need to be convinced of sufficient pressure in the pipes and purity of water.
If the water is contaminated, you should install the cleansing filter, and with insufficient pressure, use the raising pump.
Connecting equipment to the water supply can be carried out in two ways:
Article on the topic: Warming of balcony plastic doors for the winter
Using the mixer in which the tee is crashed. So you can quickly connect the technique, but this method is more often chosen as a temporary option. For such a connection, you will need a hose with sufficient length. If the washing machine is installed in the same room with a toilet, the connection is possible to the hose through which water is supplied to the drain tank.
With a separate valve. In the selected plot of the water supply, you should cut the thread, then install the valve. It can be used both crimp couplings and fitting. Water in this case should be overlapped after each washing process. With such a connection, it is especially important to install a protective mesh filter that excludes entering the machines of mechanical particles. This filter should be cleaned regularly.
Vitely this connection process, see the following video.
How to connect to sewage
The organization of the drain of water from the washing machine is carried out taking into account such nuances:
If there is no special check valve in the technique, thanks to which the water passes only in one direction, it is required to take into account when installing the machine recommended by the manufacturer's level of placement of the exhaust hose. Data on the maximum and minimum value of the boundaries of the position of the nozzle must be viewed in the instructions.
The easiest way to organize a drain is to remove water in the bath. However, the fixing of the drain hose on the side of the bath is not considered an optimal option, since the random offset of the nozzle will lead to waterproof to the floor. It is best to organize a stationary drain, in which you will not worry about the hose and risk pour the floor of the room.
For a more reliable drain to connect the drain system of the device to the sewage pipe, it is required to buy a separate siphon with a kneather, designed specifically for a washing machine. This connection variation will exclude the risk of leakage and ensure reliable water lead.
Article on the topic: Is it possible to glue wallpaper for overdue wallpaper glue
With the thickness of the sewage pipes, more than 4-5 cm, it is possible to display water from the washing machine directly into the sewer stock. In this case, it is necessary to apply the seal.
By connecting the machine, be sure to inspect the outlet hose along its entire length to exclude the beggar. If you want to connect drain hoses, for this, adapters are used, which have a clamp.
Other installation steps
When the work on the organization of the lead and water intake in the washing machine is completed, you need:
- Align the position of technology using the level. Thanks to such actions, the vibration will be minimal during operation. If the floor in the installation site is uneven, adjustable legs should be twisted. An option using wood supports, linoleum or other materials is undesirable. After tightening the legs should be checked as far as the technique is stable. To do this, click on the corners of the apparatus from above. If the machine will lean, continue the regulation of the legs.
- Connect the technique to the power grid. To do this, it is important to ground the switchboard, connect the machine into a 3-wire outlet, as well as carry out a thorough insulation of its grounding wire.
- Enable trial washing and evaluate the operation of the machine. Everything is in order if the tank is filled with water during the right time and at the same time you will not see any leaks. Next, the drum will start rotation, and after 5-7 minutes after the dialing, the water will begin to heat up. After the program is completed, there will be a drainage of water, and there will be no extraneous sounds inside the equipment.
