Those who acquire washing machines are divided into two groups - some prefer to install the device independently, and others entrust this task to professional masters or knowledgeable familiar. Before starting work, it is recommended to read the user's manual and get acquainted with the recommendations of specialists. If you are accustomed to do everything with your own hands, be prepared for the fact that such a simple, at first glance, the task is to install and connect the washing machine can hire a lot of pitfalls.
One of these nuances to which novice masters are not ready are transporting bolts. About what they represent and for what are needed, read below.
What is and what do they look?
Transport bolts are temporary fasteners that are installed on new devices in order for the transportation process to cause them less harm. In this case, we are talking about fasteners fixing the drum of the washing machine, protecting it from strain and breakdowns that can occur as a result of the impact or falling the unit during transportation.
The transport bolt is a standard fastener with a thread and hexagon head. The bolt is equipped with two washers, one of which is made of metal, and the other is made of plastic. In addition, this item has another mandatory element, namely the plastic cylinder that is needed in order to fix the drum in a certain position.
Why are you needed?
We have already told that the transport bolts are needed in order to ensure safe transportation of the washing machine. When the unit stands on the spot, the drum inside it is located in such a way that it does not concern the walls of the device. However, in the process of transportation, shaking inevitably arises, as a result of which the tank is swinging and hurts the internal parts of the machine. This can lead to extremely undesirable consequences, the most unpleasant of which is the loss of worker.
Article on the topic: When planting tomatoes, cucumbers and pepper into open ground: Terms and conditions
Where are you?
Transport bolts are located in the back of the washing machine. Usually they are screwed to the rear panel, so it is better to remove them before the unit will be installed in place. The number of fasteners can be different, but most often they are 3, 4 or 5. The opposite part of the bolt is attached to Baku, but in order to remove it, you do not need to disassemble the machine, as the bolts are very easy to pull out.
How to remove?
To dismantle the transport bolts do not need a lot of time, and the toolkit is needed very small. Some manufacturers make a special key to the washing machine for these purposes, but the usual wrench of the appropriate size is also suitable.
First, expand the unit so that you can easily get to the rear panel. Using the key, loosen the mounts, rotating them in the direction counterclockwise. Remove the bolts from the holes can be easily manually. Search among accessories that went with a washing machine, a set of plastic plugs - they are needed in order to mask the holes.
You should not throw away the extracted bolts, they may need you when moving.
Below is visual video equipment to extract bolts from the machine.
What will happen if you do not remove?
Before the start of using the washing machine, the bolts must be removed, in otherwise the age of the device will be very short. In order for the drum to rotate smoothly, redistributing the load evenly, it rests on the springs, which provide smooth, soft movement. The presence of bolts interferes with the normal rotation of the drum, which is why the machine begins to vibrate and publish foreign noise.But all this is only external manifestations. In fact, at this time, the mechanism of the washing machine is caused by a serious damage, as a result of which the unit can become unrepretentious. If the wash will break due to the fact that you forgot to remove the transport bolts, the service center will have the right to refuse you to maintain warranty.
Article on the topic: How to choose the right wallpaper to the photo
In the following video, you can observe the behavior of the car if the bolts will not be extracted.
Installation
If you need to re-establish transport bolts, for example, in case of moving or selling a washing machine, you need to do the same procedure, but in reverse order. First of all, decorative plugs should be removed. To do this, it is necessary to pour them with a screwdriver or a peer knife. Then insert the bolts into the holes, slightly press them into the inside, and, armed with a screwdriver, tighten in the direction of the clockwise direction.
Transportation of washing machine
You need to carry the washing machine in the same way as any other household technique, that is, by observing maximum caution. First of all, you should take care of the presence of transport bolts. The second most important factor is the position of the aggregate. When transporting it is better to place it standing on or on the side, so that the pump is at the bottom - in this case, the water accumulated inside does not fall into the electronic unit.
