It does not matter whether Whitepool, LG, Ariston, Indesit or other brand is worth in your house, any technique can break. And since in many cases to diagnose the cause of the breakage, it may be necessary to remove the cover of the device, each owner should be aware of how to cope with such a task.
Most often disconnecting the upper cover of the washing machine. Indesit, LG, ariston, Samsung, Whirlpool performs the first stage of product repair. For example, you will certainly have to remove the cover in the event of a door breakdown.
That's what everyone's owner should be known, going to disappear its top cover:
- Before the start of any work, the technique should be de-energized.
- To access the typewriter, it should be pulled off from the wall.
- To work, you will need a cross screwdriver.
- Actions will differ depending on the type of machine loading.
How the cover is removed on most machines with side load
Having moved the machine to get the opportunity to unscrew the bolts behind the device, find the location of the screws on the rear wall. Most models of such self-tapping screws are two, but there are devices and with three self-draws. Using a screwdriver, rotate the screws until the full twisting. Remember that plastic washers may be under them, so make sure that such details are not lost.
As soon as you unscrew the cover, you should apply an effort to disconnect it from the machine, as a result of which the cover comes out of the grooves and moves a little first ago, and then up. After that, the lid can be removed to the side. To install the cover in place, perform all actions in the reverse order, that is, first slide the cover in the grooves, then screw the screws.
Article on the topic: Installation of window slopes for plastic windows with their own hands
How to remove the lid in vertical loading devices
First open the lid and, using a screwdriver, gently move the pins, ensuring that they do not fall inside the device. For two or four minutes, the door lock must be disconnected. If problems arose with this, you need to look for malfunction problems. To access the castle, you will have to remove the side walls. By unscrewing the screws of the blocking device, click on the latch, then disconnect the wires.Other options
Some machines, such as ardo models, the lid should be removed a little differently. After unscrewing the screws at the back of the device, the cover should be shifted not in the rear side, but ahead (on itself, if you are standing face to the hatch). In this case, the cover offset will be only under a certain angle that you have to determine.
You can also meet the option of fastening the top cover not on the back, but on the front wall. For example, this fastener is in the old Siemens and Bosch devices. Removing the plug, unscrew the screws, then slightly lift the cover up and shift into the front side with respect to the typewriter. As in the case of machines of Ardo, you will need to find an angle at which the cover can be easily disconnected.
