Modern stores present a huge selection of diverse furniture for every taste. However, there is a similar furniture, as a rule, very expensive, especially if it meant a good double bed from a high-quality tree.
The bed of wood, made by their own hands, is much more economical than purchased.
But you do not need to spend money on the purchase of new furniture. An excellent solution to this problem will be a double bed, with your own hands made.
Preparation for work
First of all, you will need to draw up a drawing, as well as prepare materials and tools that will help you collect a bed with your own hands. The number of materials needed to build a bed directly depends on its dimensions. However, before determined with the size of the bed and draw a drawing, you need to know the exact dimensions of the mattress.
Size of the sizes of the mattress.
Ready shopping products, as a rule, have standard sizes. If you for some reason they do not fit, you can make a mattress with your own hands. To do this, you will need 2 pieces of foam in a thickness of 125 mm. They must have different density. The top must be more dense (from 45 kg / m³), and the material with a density of 35 kg / m³ is suitable for the lower layer. The width and length of the mattress are selected in accordance with individual preferences. The most common option is 200х150 cm. The relevant sizes are put on the filler. As a result, you will receive an excellent homemade mattress with a width of 150 cm, 200 cm long and 25 cm high.
To make a double bed, you will need to purchase the following materials:
- Boards with dimensions 200x30x2 cm in the amount of 3 pieces. Will be used for the manufacture of headboard, rear and front walls.
- Boards with dimensions 250x30x2 cm in the amount of 2 pieces - for the side walls of the bed.
- Bar 200 cm long and a cross section of 4x4 cm in an amount of 5 pieces - for supporting, bearing and legs.
- Rake 150x4x2 cm - With it, it will be attached to the headboard boards, it will also be used for a robust coating. Instead of the rake, you can use a thick faeer.
- Moril.
- Carpentry glue.
- Varnish.
- Saws.
Article on the topic: Filling of the floor in the apartment: how to pour your own hands
You will surely need a drawing of the bed.
Bed drawing.
To assemble a wooden bed yourself, you will need the following tools:
- Drill.
- Hacksaw.
- Electrolzik.
- Screwdriver.
- Cutter.
- Sandpaper
- Metal ruler.
- Plane.
- Roulette.
- Corolnic
- Pencil.
Prepare all the necessary materials and tools, proceed to the layout of sawn timber and their further sawing. Stick at the same time several of the main recommendations:
- First prepare the drawing of the future bed with the exact dimensions of each part.
- Make a list of bed items and indicate the amount of material required to create them.
- Marking lines For further cut, apply a pencil or cutter on the line.
- To facilitate the work, in the manufacture of several identical details, you can cut out only 1 and use it as a template.
- The surface of the sleeps are necessarily cleaned with the help of sandpaper.
Step-by-step instruction for assembling frame
Measure the mattress you will use with a flat bed.
It should freely be located in the frame frame, however, and there should be no big gaps.
Wooden bed frame circuit.
In accordance with the measurements removed, cut 2 end boards and 2 long boards for sidewalls. Collect them in a rectangle. Use eyelashes and wooden spikes for bonding boards. The compounds must be W-shaped. Sockets under such connections cut out the jigsaw or extend with the help of chisels.
The depth of the grooves should be about 50 mm, and the width is 20-30 mm. Lubricate the hairpins with jointed glue and connect. Align them at the angles of 90 degrees and secure with clamps before drying.
Wooden bed on such a frame - it is a reliable and efficient product. Such a design is an example of a traditional joinery. If you can't make a middle-aged coupling, you can use a spike mount to fasten the sides of the wooden frame.
To do this, you will need to take the boards and prepare in their end sides of the mating holes, the diameter of which must correspond to the diameter of the wooden spike. Lubricate the spikes and holes with carpentry glue and assemble.
Article on the topic: Box for linen with your own hands
The easiest way to assemble the base of the tree bed is a compound with self-assembly with additional fixing with a metal corner.
Hands for installing legs
Fastening the legs to the bed to the bed.
The wooden bed under consideration will be installed on reliable and durable legs. To begin, you will need to cut off the bars of the same length, of which the legs will be made. The legs are mounted in the corners of the bed. They can be installed from the inside, outside or inserted into the frame.
If you decide to insert legs into the frame, then it is recommended to use a studded fastening for assembly. It is more reliable for similar designs, so the legs will not be loosened for a very long time.
If your wooden bed is wider than 200-220 cm, it is recommended to install an additional fifth leg. It is installed in the middle of the frame. In this case, you will need to secure an additional longitudinal board and attach the leg to it.
The procedure for assembling a lamellar frame
He is a grill or grid. The main function of this design is to support the mattress. It is due to the lamella frame, it will not be pushed inside, to deform and fall into the floor.
Scheme assembly lamellary frame.
First of all, you will need to take a fastening stop rail and fill it on the inside of the skeleton of the bed, on the end boards and sidewalls. Make a markup at a height of at least 100 mm from the top edge. On the perimeter, the rail can be attached to a dotted and solid line. Instead, a metal corner is suitable.
Take the bar (it will be enough to cross section 30x30 mm) and make a frame for lamellas. It is fixed on the inner size of a double bed frame. On Rama type rake with dimensions of 150x4x2 cm. It is attached across length. The step must be 5-7 cm.
Article on the topic: common problems with home heating: reasons and elimination
If you work in accordance with previously shown drawings, you will not have any problems with the assembly of the product, and the finished wooden bed will serve you for many years without the slightest complaints. At the end, it will remain to handle the frame of sandpaper and open it with varnish.
Finish trim bed
So that the finished wooden bed looks beautiful and fit well in the interior, you need to choose a coating of this color that would be fine with the existing situation. Thoroughly skill and clean the frame, soak it with oil and cover the pentafthal or oil paint.
Before covering wood with varnish, the surface must be given the required tone with the help of the veil. It is evenly applied with a brush. Wait for the material to dry, and apply varnish with a foam tampon, tassels or rollers. It is recommended to apply varnish at least 2 layers. The dried surface polish the felt or felt sponge.
Buy a decorative viper plate for squatting and headboard. The carved wooden plate of the desired design can be ordered in a joinery workshop. To decorate side horizontal boards, ready-made carved strips are suitable. Such decorations do not create a tangible load and are easily attached with the help of self-tapping screws, small carnations or glue. When everything is ready, it will only be left to put a mattress, and a wooden bed can be used for its intended purpose. Good job!